c051a578e5
fmcomms2: Delete unnecessary clock definition
...
The two clocks, rx_clk and ad9361_clk, are the same.
2015-11-20 19:35:37 +02:00
2345d29663
fmcomms2: Update make files
2015-11-11 11:15:45 +02:00
9d2b8809df
Makefiles: Updated Makefiles
2015-10-23 10:44:27 +03:00
28d20e84c5
fmcomms2/zc702: Fix the system_top
...
Fix the enable/txnrx control lines.
2015-09-25 19:11:30 +03:00
28aea82952
fmcomms2_zc702: Add SPI and GPIO interface for FREQCVT
2015-07-22 10:16:04 +03:00
a7da779b94
Makefile: Updated Makefiles
2015-07-16 18:19:42 +03:00
46fa91d5be
Makefile: Update Make files
2015-07-03 18:08:57 +03:00
0102e3e02c
fmcomms2_ALL: Preserve backward compatibility for ENABLE/TXNRX control
...
By default the ENABLE/TXNRX pins are controlled by GPIOs, if the TDD module is enabled, the TDD FSM will take over the control of these two pins.
2015-07-01 13:54:01 +03:00
a6cae6b477
iobuf: do is a system verilog keyword
2015-05-21 14:06:17 -04:00
6b9906b22b
Refresh Makefiles
...
Re-generate the Makefiles after a small update to the generation script:
- Entries are sorted alphabetically
- Empty dependency lines are skipped
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-05-21 14:21:54 +02:00
c19749361d
Makefiles: Updated makefiles to have as a result the programming file instead of the project file.
...
Also fixed altera projects dependencies
2015-05-18 17:22:46 +03:00
949abcdc8f
Makefile: Updated makefiles so that the project recipe does not depend on lib
2015-05-06 14:58:29 +03:00
dc2b37bd0c
Makefile: Added top level Makefile. Modified behavior of clean and clean-all
...
Clean ran for a project will clean only the project files.
Clean-all ran for a project will clean also the library files on which the project depends.
The clean commands will only remove specific files and directories.
The top Makefile allows several options(per suggestion from jameyhicks):
make fmcomms1.zed will run "make all" in projects/fmcomms1/zed/
make clean will run "make clean" for all the projects
make clean-all will run "make clean" for all the projects and libraries
make lib will run "make all" for the library files
2015-04-17 17:22:38 +03:00
780455d68c
Makefile: Updated makefiles. Added makefiles for altera
2015-04-09 17:57:06 +03:00
5f8e9a74ea
makefile: updated
2015-04-07 16:32:01 -04:00
f79a152958
Makefiles: updated all makefiles adding clean functionality
2015-04-03 11:57:54 +03:00
9dac22c814
fmcomms2: ZC702 fixed GPIOs in top file
2015-04-02 15:30:41 +03:00
74d3d458da
makefile: added
2015-04-01 16:29:39 -04:00
f0d08abe03
fmcomms2: Fix system_top.v for a few carrier
...
Interrupts are connected inside IPI. Fix system_top for zed, zc702, zc706 and kc705.
2015-03-18 10:37:24 +02:00
70e1d13a7b
fmcomms2: Updated project
2015-03-13 12:49:17 +02:00
ad08c62b36
fmcomms2: Updated zc702 project. Updated interrupts. Updated constraints
2014-11-07 14:01:55 +02:00
f528873fa9
fmcomms2: Add an additional SPI interface for up/down converter board
...
Supported carriers are: ZC706, ZC702 and Zed.
2014-10-10 18:47:07 +03:00
ca4c961891
fmcomms2: Use ad_iobuf instance on system_top
...
Use ad_iobuf instance on system top, instead of separate IOBUF instances.
2014-10-10 18:45:39 +03:00
e21d26e456
fmcomms2: Cosmetic changes
...
Get rid of unwanted whitespaces.
2014-10-10 18:25:17 +03:00
7e40f99fe9
fmcomms2: Improved constraints for ac701 and zc702. Fixed common design so that ILA works correctly on microblaze based systems
2014-09-23 22:28:27 -04:00
2c898bf3a2
Added ZC706, ZC702 and ZED FMCOMMS2 Vivado Project
...
ZC706 runs rx_clk at 250 MHz.
ZC702 and ZED run rx_clk at 200 MHz due to slower fabric.
The ZC702 and ZED projects need init_user in the boot procedure in order for the HP Ports to work correctly.
Both DDS and DMA mode work.
2014-03-18 15:27:42 +02:00
Istvan Csomortani
Adrian Costina
Rejeesh Kutty
Lars-Peter Clausen
ATofan