275ec3d3a8
axi_ad9361: Updated altera interfaces, added FIFO conduits per channel
2015-11-24 11:21:08 +02:00
250f3c917b
axi_ad9361: Removed old signals from the altera device interface module
2015-11-24 11:20:35 +02:00
fb269f7a29
util_cpack: Updated altera interfaces
...
- DMA side, simplified naming
- ADC side, added FIFO conduit per channel
2015-11-24 11:18:18 +02:00
e6de2ade78
util_upack: Updated altera interfaces
...
- DMA side, simplified naming
- DAC side, added FIFO conduit per channel
2015-11-24 11:17:02 +02:00
c5ff1674c6
axi_dmac: Updated fifo interfaces for easier connectivity
2015-11-24 11:08:28 +02:00
e5d2f5be06
util_upack: Cosmetic changes
2015-11-24 10:55:10 +02:00
985f2ca020
library: ad_rst, added comment so that the registers are not minimized away
2015-11-24 10:33:38 +02:00
c051a578e5
fmcomms2: Delete unnecessary clock definition
...
The two clocks, rx_clk and ad9361_clk, are the same.
2015-11-20 19:35:37 +02:00
c15c82d9d1
ccpci- remove ps7 ddr hp0 access
2015-11-19 16:42:02 -05:00
4603bd222b
ccpci- set pcie io after ip
2015-11-19 16:42:01 -05:00
95af462409
ccpci- loc by pin-name is ignored
2015-11-19 16:42:00 -05:00
0f8d427aef
ccpci- remove ila
2015-11-19 16:41:58 -05:00
9cfbf0ea61
ccpci- add axi spi/gpio
2015-11-19 16:41:57 -05:00
bdf9754971
util_tdd_sync: Sync signals output reg is a false path source
2015-11-17 09:42:05 +02:00
a1601a03d6
pzsdr: added ad9361 clock out
2015-11-16 15:55:56 -05:00
8aefe569b8
pzsdr: output ad9361 clock out to fan io
2015-11-16 15:54:30 -05:00
597e9eae84
pzsdr: added ad9361 clock out
2015-11-16 15:53:29 -05:00
a6f44949d6
daq3: updates
2015-11-13 13:17:11 -05:00
9ba8c059ce
ad_tdd_sync: Fix reset value of the pulse_counter
2015-11-13 18:31:24 +02:00
c88cbf78af
fmcomms5: Added wfifo at the between AD9361 and cpack core
2015-11-13 15:50:32 +02:00
3c27b3a4c5
ad_lvds_in: Add single ended option
2015-11-13 12:13:09 +02:00
bec4c8da84
pzsdr: Update Make files
2015-11-11 11:16:05 +02:00
2345d29663
fmcomms2: Update make files
2015-11-11 11:15:45 +02:00
a936ad607f
fmcomms2/zc706: Delete unused files from file list
2015-11-11 11:14:58 +02:00
c7e86528d6
fmcomms2/zc706: Cosmetic changes on constraints file
2015-11-11 11:14:16 +02:00
b17fec689e
ad_tdd_control: An active sync pulse can NOT be a reset for the control lines
...
By reset the control lines (RF, VCO and DP) on an active sync pulse, can cause glitches on the ENABLE/TXNRX lines. The sync pulse resets just the TDD counter.
2015-11-11 11:13:33 +02:00
6197a82c80
fmcomms2/common: Add the util_tdd_sync module
2015-11-11 11:07:15 +02:00
fc0f4bc414
axi_ad9361: Delete the old sync generator from the core
...
+ Define two control signal for util_tdd_sync : tdd_sync_en and tdd_terminal_type
+ Delete to old ad_tdd_sync.v instances from the core
+ Update Make files
+ Update ad_tdd_control: add additional CDC logic for tdd_sync (the sync comes from another clock domain)
+ Update the ad_tdd_sync module: it's just a simple pulse generator, the pulse period is defined using a parameter, pulse width is fixed: 128 x clock cycle
+ Update TDD regmap: tdd sync period is no longer software defined
2015-11-11 11:06:19 +02:00
a290611c09
util_tdd_sync: Initial commit
...
A synchronization signal generator for AD9361 running on TDD mode.
If the associated device is master, the module generates a pulse in a defined interval. Otherwise receives the sync signal from outside.
2015-11-11 10:46:11 +02:00
5cc97c78d3
Makefiles: Update makefiles to include the nerw axi_gpreg / util_mfifo libraries
2015-11-10 09:32:50 +02:00
ef9bdf6ec9
adi_project: Regenerate the layout of the IP Integrator subsystem design.
2015-11-09 11:01:10 +02:00
1d6254fdec
pzsdr/ccbrk: loopback board support
2015-11-06 11:34:21 -05:00
e7fd964874
axi_clkgen: Added a second input clock option
2015-11-06 17:55:29 +02:00
afc4274ee3
common scripts: Changed the resulting hdf file to system_top_bad_timing, if design doesn't meet timing.
2015-11-06 16:01:19 +02:00
0c7c0f2cd8
common scripts: Change the name of the generated HDF if the design doesn't meet timing
2015-11-05 18:41:51 +02:00
11718291cf
pzsdr/ccfmc- add single loopback core
2015-11-05 11:28:38 -05:00
839e76996f
axi_gpreg: added constraints
2015-11-05 11:28:37 -05:00
482b740229
axi_gpreg: add buffer enable
2015-11-05 11:28:35 -05:00
66d4f8fd58
util_gtlb: output receive/transmit clocks
2015-11-05 11:28:34 -05:00
9e27a60478
pzsdr/ccfmc- single loopback core
2015-11-05 11:28:33 -05:00
28bfeb442c
util_gtlb- syntax error fixes
2015-11-05 11:28:31 -05:00
e36f27b061
daq2: Update A10GX project, with the latest changes.
...
Works with up to 64k samples
2015-11-04 14:54:09 +02:00
83399ef6ee
a10gx: Updated common project to work with Linux (enabled MMU)
2015-11-04 13:35:52 +02:00
6d28a92b5b
util_adcfifo: Added altera initial constraints file
2015-11-04 13:34:52 +02:00
e8b84b3662
axi_dmac: Updated axis destination / source ports for altera component
2015-11-04 13:33:41 +02:00
de53a61902
util_adcfifo: Put a limit on the read/write address from memory so there is no overflow
...
Added altera component
2015-11-04 13:31:50 +02:00
6cfc13a9dd
common: Allow for the memory to be also symetrical
2015-11-04 13:28:02 +02:00
ad1cef1441
axi_gpreg: compile fixes
2015-11-03 14:29:00 -05:00
c8019b69fd
axi_gpreg- added
2015-11-03 14:28:59 -05:00
88f247a1de
util_gtlb: use gpio
2015-11-03 14:28:57 -05:00
Adrian Costina
Istvan Csomortani
Rejeesh Kutty