c9a7d4d927
Add copyright and license to .tcl, .ttcl files
...
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-07-25 15:22:26 +03:00
1cac2d82e1
Add copyright and license to .xdc files
...
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-07-25 11:03:02 +03:00
28c06d505f
Add/edit copyright and license for .v, .sv files
...
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-07-11 15:17:41 +03:00
db94628cc6
library & projects: Update Makefiles
...
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
2023-01-27 11:54:05 +02:00
1eb5f4985b
projects/common: Add build files templates carriers. Modified Quartus Versions
...
The build files are available for the following carriers:
* intel: a10gx, a10soc, c5soc, de10nano, s10soc
* xilinx: coraz7s, kc705, kcu105, vc707, vc709,
vck190, vcu118, vcu128, vmk180,
zc702, zc706, zcu102, zed
* Added Makefiles, system_constr.sdc, system_qsys intel
* Added Makefiles, system_bd, system_constr xilinx
* de10nano, c5soc: Changed quartus version from 20.1.1 to 21.1.0
according to last commit update
Signed-off-by: laurent-19 <laurentiu.popa@analog.com>
2022-10-05 10:47:21 +03:00
6b94259a52
projects/common: Add system_top _project templates
...
Signed-off-by: laurent-19 <laurentiu.popa@analog.com>
projects/common: Correct code and modify according to guidelines
* Added spacing to ports declaration
* Corrected coding mistakes/misspelling
* Modified/added variables names
* Added seetings (intel) and removed specific optimization settings
* Added assignments to unassigned pins (gpios)
Signed-off-by: laurent-19 <laurentiu.popa@analog.com>
projects/common: Correct/Add missing wrapper ports and iobufs
* Added port in wrapper (mainly spi) according to base design file
* Added instances of iobufs where missing
* Corrected gpio assignments or added missing ones
* Corrected minor guidelines mistakes
Signed-off-by: laurent-19 <laurentiu.popa@analog.com>
ac701/system_top.v: Change top based on previous projects
* Looked at fmcomms1, fmcomms2 from hdl_2016_r1 and datasheet
Signed-off-by: Iulia Moldovan <Iulia.Moldovan@analog.com>
projects/common: Modify templates to build without errors
* Changed path for adi_env.tcl
* Moved adi_project command before assign intel
* Removed unnecessary spi signals
* Added spi ports with default logic
* a10soc: Removed pl-ddr signals and ports
* ac701: system_bd: Modified mdio interface
system_project: Added adi_board, adiobuf sourcing
system_top: Removed hdmi, i2c, fanpwm, spdif ports
according to base design
* c5soc: Added version settings
Removed unused gpios
* microzed: system_bd: Enabled RTS1 to use FCLK
system_top: Removed hdmi, i2c, unused gpios
* vc709: Separated input from ouput gpio, according to bd
Removed unnecessary ports
Signed-off-by: laurent-19 <laurentiu.popa@analog.com>
projects/common: Delete microzed vmk_es templates
* Removed hp0 interconnect from cora base design
* Added extra line to files de10nano
Signed-off-by: laurent-19 <laurentiu.popa@analog.com>
2022-09-20 17:00:49 +03:00
72cf8f9b5d
projects/common: Add fmc connection files for every platform
2022-09-20 14:11:08 +03:00
0d44bfb4dd
axi_hdmi_tx update for: ZedBoard, ZC706, ZC702, de10nano, ADRV9361-Z7035 ( #897 )
2022-03-29 16:51:21 +03:00
0261eade0c
zynq:all: fix SPI clock constraint
...
According to data sheets the EMIO SPI controller maximum frequency is
just 25MHz. Constrain the SPI clock accordingly.
2019-08-09 16:39:56 +03:00
0680e44330
system_id: deployed ip
2019-08-06 16:53:11 +03:00
4fe5f007cb
system_id: added axi_sysid ip core and tcl
2019-08-06 16:53:11 +03:00
de510b45ab
base: Add system_processor_rst for all the global clocks
2019-06-11 18:13:06 +03:00
20c714eccf
common: Define three global clock nets
...
For all the Xilinx base design, define three global clock nets, which
are saved in the following three global variable: $sys_cpu_clk, $sys_dma_clk
and $sys_iodelay_clk.
These clock nets are connected to different clock sources depending of
the FPGA architecture used on the carrier. In general the following
frequencies are used:
- sys_cpu_clk - 100MHz
- sys_dma_clk - 200MHz or 250Mhz
- sys_iodelay_clk - 200MHz or 500Mhz
2019-06-11 18:13:06 +03:00
5986e87a1f
zynq/zynqmp: create a 50MHz clock on the SPI clock outputs of the PS
2019-05-30 14:55:11 +03:00
958ba7c3af
common zed, zc702 and zc706: Remove parameter assignment
...
The SYNC_TRANSFER_START parameter is disabled in this configuration
of the axi_dmac, trying to set the parameter will generate a warning.
2019-05-27 16:48:26 +03:00
9c6da0ff45
zed, zc702, zc706, ccfmc: Send video trough axis interface
2018-09-27 11:45:28 +03:00
a0e3997687
common/zed_system_bd.tcl: Replace VDMA
...
Replace Xilinx VDMA IP with ADI axi_dmac IP.
2018-08-20 14:28:01 +03:00
ebae8bf8c1
Remove interrupts from system_top for all xilinx projects
...
- remove interrupts from system_top
- for all suported carriers:
- remove all interrupt bd pins
- connect to GND all initial unconnected interrupt pins
- update ad_cpu_interrupt procedure to disconnect a interrupt from GND
before connectiong it to another pin.
2018-08-10 10:10:58 +03:00
74288cf9cb
axi_hdmi_tx: Added INTERFACE parameter for selecting the interface type
...
Update all carriers/projects bd for configurable video interface:
- common zc702, zc706, zed
- adrv9361z7035/ccfmc_lvds
- imageon
2018-07-24 15:56:22 +03:00
bb0021a926
common: zed/zc702/zc706/mitx045: audio_clkgen: Disable phase alignment
...
There is no need for the audio clock to be phase aligned to its source
clock. When phase alignment is disabled the MMCM uses an internal feedback
path without requiring external resources, so disable it.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-20 18:12:24 +02:00
bfcc3696e4
common: zed/zc702/zc706/mitx045: Set audio clkgen clock source type
...
Depending on the configuration of the clock source type of the input clock
the clocking wizard will instantiate all kinds of buffers on the input
clock signal.
For these particular projects there is no need to add any kind of buffer
since the source is already coming from a global clock buffer. So set the
configuration accordingly.
Avoids the following warning:
[Opt 31-32] Removing redundant IBUF since it is not being driven by a
top-level port. i_system_wrapper/system_i/sys_audio_clkgen/inst/clkin1_ibufg
Resolution: The tool has removed redundant IBUF. To resolve this
warning, check for redundant IBUF in the input design.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-20 18:12:24 +02:00
b213567305
common: zed: audio_clkgen: Infer input clock frequency
...
Instead of manually specifying the input clock frequency let the core infer
it automatically. This makes it more straight forward to change the clock
frequency.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-19 16:29:09 +02:00
627f78ec19
Ip automatic version update: common/board
...
- vc707
- zc702
- zed
2017-04-12 19:03:16 +03:00
2e59f377e1
version_upgrade: Update ac701, mitx045 and zed common design to Vivado 2016.2
2016-08-29 09:50:46 +03:00
a0c5f46940
zed: Updated common design to 2015.4
2016-03-15 15:20:46 +02:00
212235189f
hdmi-tx- signal name changes
2015-08-28 13:48:33 -04:00
203d7cb470
projects/common: Cosmetic changes.
2015-08-25 09:58:32 +03:00
af8a48d90e
projects: Fix broken parameters at the common block designs.
...
Fix parameter names for axi_spdif_tx and axi_i2s_adi core instantiations.
2015-08-25 09:25:24 +03:00
57cfb7cfb1
hdl/library: Update the IP parameters
...
The following IP parameters were renamed:
PCORE_ID --> ID
PCORE_DEVTYPE --> DEVICE_TYPE
PCORE_IODELAY_GROUP --> IO_DELAY_GROUP
CH_DW --> CHANNEL_DATA_WIDTH
CH_CNT --> NUM_OF_CHANNELS
PCORE_BUFTYPE --> DEVICE_TYPE
PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE
CHID --> CHANNEL_ID
PCORE_DEVICE_TYPE --> DEVICE_TYPE
PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N
PCORE_SERDES_DDR_N --> SERDES_DDR_N
PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE
DP_DISABLE --> DATAPATH_DISABLE
PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE
C_BIG_ENDIAN --> BIG_ENDIAN
C_M_DATA_WIDTH --> MASTER_DATA_WIDTH
C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH
NUM_CHANNELS --> NUM_OF_CHANNELS
CHANNELS --> NUM_OF_CHANNELS
PCORE_4L_2L_N -->QUAD_OR_DUAL_N
C_ADDRESS_WIDTH --> ADDRESS_WIDTH
C_DATA_WIDTH --> DATA_WIDTH
C_CLKS_ASYNC --> CLKS_ASYNC
PCORE_QUAD_DUAL_N --> QUAD_DUAL_N
NUM_CS --> NUM_OF_CS
PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID
PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID
PCORE_CLK0_DIV --> CLK0_DIV
PCORE_CLK1_DIV --> CLK1_DIV
PCORE_CLKIN_PERIOD --> CLKIN_PERIOD
PCORE_VCO_DIV --> VCO_DIV
PCORE_Cr_Cb_N --> CR_CB_N
PCORE_VCO_MUL --> VCO_MUL
PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC
PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH
PCORE_ADDR_WIDTH --> ADDRESS_WIDTH
DADATA_WIDTH --> DATA_WIDTH
NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS
DEBOUNCER_LEN --> DEBOUNCER_LENGTH
ADDR_WIDTH --> ADDRESS_WIDTH
C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED
Cr_Cb_N --> CR_CB_N
ADDATA_WIDTH --> ADC_DATA_WIDTH
BUFTYPE --> DEVICE_TYPE
NUM_BITS --> NUM_OF_BITS
WIDTH_A --> A_DATA_WIDTH
WIDTH_B --> B_DATA_WIDTH
CH_OCNT --> NUM_OF_CHANNELS_O
M_CNT --> NUM_OF_CHANNELS_M
P_CNT --> NUM_OF_CHANNELS_P
CH_ICNT --> NUM_OF_CHANNELS_I
CH_MCNT --> NUM_OF_CHANNELS_M
4L_2L_N --> QUAD_OR_DUAL_N
SPI_CLK_ASYNC --> ASYNC_SPI_CLK
MMCM_BUFIO_N --> MMCM_OR_BUFIO_N
SERDES_DDR_N --> SERDES_OR_DDR_N
CLK_ASYNC --> ASYNC_CLK
CLKS_ASYNC --> ASYNC_CLK
SERDES --> SERDES_OR_DDR_N
GTH_GTX_N --> GTH_OR_GTX_N
IF_TYPE --> DDR_OR_SDR_N
PARALLEL_WIDTH --> DATA_WIDTH
ADD_SUB --> ADD_OR_SUB_N
A_WIDTH --> A_DATA_WIDTH
CONST_VALUE --> B_DATA_VALUE
IO_BASEADDR --> BASE_ADDRESS
IO_WIDTH --> DATA_WIDTH
QUAD_DUAL_N --> QUAD_OR_DUAL_N
AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT
ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH
ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH
MODE_OF_ENABLE --> CONTROL_TYPE
CONTROL_TYPE --> LEVEL_OR_PULSE_N
IQSEL --> Q_OR_I_N
MMCM --> MMCM_OR_BUFR_N
2015-08-19 14:11:47 +03:00
6862655b0d
Add .gitattributes file
...
Add .gitattributes file which sets up the eol encoding handling. This will
make sure that we get a uniform eol encoding across different operating
systems.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 11:07:10 +02:00
71b5004b25
projects- drp moved to up-clock domain
2015-06-01 14:57:59 -04:00
f232a36141
common: Place HDMI interface registers into the IOB
...
The paths from the HDMI interface registers to the IO pads are
unconstrained. This means the P&R can in theory put the register anywhere
which could lead to stability issues on the interface, depending on what
else is in the fabric. To get predictable delays for the register to IO pad
path place the register into the IOB section.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-23 14:33:47 +02:00
7f26bfe436
zed: Use interface connection for the I2S stream
...
Use a interface connection for the I2S stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
06e37b0082
common: zed: Use interface to connect I2C core to the I2C mixer
...
Use a interface connection for the I2C connection instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
70deb1eed1
common: zed: Use interface connection for the HDMI DMA stream
...
Use a interface connection for the HDMI DMA stream instead of individually
connecting each of the signals. This make things a bit cleaner.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
38722e569b
common: zed: Fix audio DMA reset signals
...
Make sure to connect the I2S and SPDIF core DMA reset signals to the correct net.
Fixes audio support on the ZED board.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-04-08 13:29:25 +02:00
7befef6662
fmcomms2_zed: Update design to the new hdl framework
2015-03-13 18:52:57 +02:00
f566268db5
zed_common: Updated common to 2014.4
2015-01-08 11:59:26 +02:00
7ae003cf82
zed_base: Interrupt update
2014-10-30 19:00:05 +02:00
10b898a62d
zed_base: Fix IRQ layout.
...
Just a temporally fix of IRQ layout.
2014-10-27 14:46:26 +02:00
5deffd57b1
zed: Remove top level constraints
...
Remove top level constraints from the ZED base design.
2014-10-20 13:20:27 +03:00
7d3be14ab5
common: Connect audio clkgen reset
...
While we are at it also hide the unused locked pin.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:44:46 +03:00
fd89458708
common: Set cpu interconnect strategy to minimize area
...
There will rarely be concurrent access to the peripheral control bus
interconnect, so there is no need to optimize for performace. Setting the
interconnect strategy to minimize area can reduce the resource usage by
~90%.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-10-15 18:43:54 +03:00
43e9b0c7a6
common: Disable TTC0 MMIO routing for PS7
...
We do not use the ttc0 to MMIO routing, but it is enabled by default, so
explicitly disable it.
2014-10-10 16:19:51 +03:00
041d8faaf7
common: Updated common projects for ac701/kc702/zc702/zed to vivado 2014.2
2014-09-30 10:31:00 +03:00
41cc92ef49
Remove BASEADDR/HIGHADDR parameters
...
This is unused and unneeded. The AXI interconnect will make sure that a
peripheral only gets requests that are meant for it, there is no need to
check the address in the peripheral itself.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2014-09-11 12:26:37 +02:00
a49eb5853b
ZED, ZC702: Added contraints so that projects can successfully synthesize on linux systems
...
For ZC706 Fixed one constraint which was not correct
2014-08-26 16:28:41 +03:00
f9a67371c0
Zynq Base System: Reset is synchronized to lowest system clock
...
System reset (sys_100m_reset) is synchronized to lowest system
clock (FCLK0), via a Processor System Reset module
2014-03-26 17:58:14 +02:00
dc44703cf1
zynq/non-zynq: identical signal names and instances
2014-03-17 17:02:03 -04:00
f3ae57a53e
global clock and reset names
2014-03-11 09:57:59 -04:00
Iulia Moldovan
laurent-19
AndrDragomir
PopPaul2021
Laszlo Nagy
Arpadi
Istvan Csomortani
AndreiGrozav
Lars-Peter Clausen
Rejeesh Kutty
Adrian Costina