68570c1815
vc707: Common system mig, updated datawidth to 256 from 128
2015-05-08 10:51:27 +03:00
12ed393d39
ad9361- framing modifications
2015-05-07 15:13:18 -04:00
a68539edf1
ad9361- framing modifications
2015-05-07 15:13:17 -04:00
d7a0f1ffe3
projects/imageon_loopback: Add the option of setting hdmi_iic_rstn externally.
2015-05-07 15:17:16 +03:00
176a4a4b76
ad9361: add ddr-edgesel
2015-05-06 16:58:50 -04:00
a8534a9c02
ad9361: add ddr-edgesel
2015-05-06 16:58:49 -04:00
32f7e98afd
ad9361: add ddr-edgesel
2015-05-06 16:58:47 -04:00
670850183b
axi_hdmi_tx: Updated constraints as in fmcomms2/zc702 project they were not correctly applied
2015-05-06 18:53:19 +03:00
a7c96fdac8
util_dacfifo: General clean up of the IO, input/output data has the same width
2015-05-06 16:32:44 +03:00
0613dca0b7
axi_dmac: Move the 'axis_xlast' logic into the dest_axi_stream module
2015-05-06 16:10:28 +03:00
949abcdc8f
Makefile: Updated makefiles so that the project recipe does not depend on lib
2015-05-06 14:58:29 +03:00
65af205d6b
axi_dmac: Add axis_last control signal to the Master AXI Streaming interface
...
This control signal can be overwritten by the up_axis_xlast/up_axis_xlast_en bits, in order to create a single stream, which is contains multiple streams.
This can be use to fill up the DACFIFO module.
2015-05-06 13:54:31 +03:00
4f75414a1a
fmcomms1: Removed constraints that are not needed
2015-05-05 23:39:08 +03:00
1fcaf8fb63
fmcomms1: Updated AC701 project to meet timing. Reduced FIFO size for AD9643 DMA to 8
2015-05-05 23:37:01 +03:00
90a5bb81b6
cftl_cip: Updated project to work with the new util_pmod_adc core
2015-05-05 23:34:52 +03:00
233cc111d2
util_pmod_adc: Used generated clock for the ADC SPI. Works by default at 6.25MHz
2015-05-05 23:33:13 +03:00
95805f21fa
adv7511: Fixed system_top for mitx045 board
2015-05-05 10:08:11 +03:00
3517b6941c
adv7511:kcu105, axi_hdmi_tx, axi_spdif_tx constraints modified so they apply to ultrascale
2015-05-05 10:06:26 +03:00
319f821fab
zc706pr - makefile
2015-05-04 13:41:03 -04:00
ab85e2ba36
zc706pr - 706 partial reconfiguration
2015-05-04 12:36:57 -04:00
e489090fbb
scripts- initialize prcfg list
2015-05-04 12:34:19 -04:00
2a8703763e
zc706pr - 706 partial reconfiguration
2015-05-04 12:33:28 -04:00
c3dd9258e7
zc706: project mode
2015-05-04 10:25:12 -04:00
62acd37fee
zc706: project mode
2015-05-04 10:25:07 -04:00
707b285669
prcfg: bb def
2015-05-04 10:24:13 -04:00
e7a0da9089
fmcomms2 : Verify the existence of the PR license
...
The fmcomms2 runs by default on PR mode, if the project script does not find a PR license, will implement just the default mode.
2015-05-04 15:12:38 +03:00
4bb26caa13
itx045: default install
2015-05-01 16:19:10 -04:00
ad551a0073
itx045: updates
2015-05-01 16:18:43 -04:00
aced144916
itx045: updates
2015-05-01 16:18:23 -04:00
ff443655ca
itx045: add ps7 settings
2015-05-01 16:17:59 -04:00
26fb85583b
adi_project- prefix directory for gitignore & make clean
2015-05-01 13:18:12 -04:00
ff985875a0
gitignore: add non-project stuff
2015-05-01 13:17:14 -04:00
00cafd4df0
fmcomms2/zc706: add partial reconfiguration
2015-05-01 12:23:18 -04:00
3641d8f714
fmcomms2/zc706: add partial reconfiguration
2015-05-01 12:23:11 -04:00
75a81d67d8
fmcomms2/zc706: add partial reconfiguration
2015-05-01 12:23:07 -04:00
0dc4c9cda9
adi_project: added partial reconfiguration
2015-05-01 12:21:59 -04:00
140c622c8b
prcfg: common files
2015-05-01 11:48:09 -04:00
a8d4c916c1
fmcomms2_bd: remove axi3 switch
2015-05-01 11:47:29 -04:00
be32715ab3
axi_adcfifo: Updated constraints
2015-04-30 14:23:24 +03:00
3b58785368
daq1: Updated jesd reset connection. Fixed dmac async configuration. Updated zc706 constraints
2015-04-30 12:14:03 +03:00
e332fa01c8
ad6676evb, daq2, fmcadc2, fmcjesdadc1, usdrx1: Updated jesd reset connection
2015-04-30 12:11:46 +03:00
d623f77453
axi_jesd_gt: Added rx_jesd_rst and tx_jesd_rst.
...
Resets for both up clock domain and rx clock domain are needed in some projects
2015-04-30 12:07:36 +03:00
463c4d4d28
util_wfifo: Added constraint for the resetn path
2015-04-30 12:05:02 +03:00
392ba31a07
axi_hdmi_rx: Updated constraints
2015-04-30 12:04:15 +03:00
1df48a2e6e
Add hdmiio_int pin.
2015-04-29 18:50:28 +03:00
19ef85cec3
vc707: Changed mig project to use BANK_ROW_COLUMN, as it seems this mode gives best performance
2015-04-28 17:15:58 +03:00
288b9cccff
Makefile: Added makefiles for imageon_loopback project. Updated axi_ad9152, util_gmii_to_rgmii, util_wfifo to include constraints file
2015-04-28 15:22:37 +03:00
252aa135eb
ad9739a: Changed dma and interconnect clock to 200mhz. Removed div_clk constraint, as it is autodetected
2015-04-28 15:14:31 +03:00
a7a2d194e9
axi_jesd_gt: Switched rx_rst and rx_rst_done to up clock domain, to be compatible with xilinx JESD core
2015-04-28 15:04:18 +03:00
3fdda617a4
fmcomms1: updated common, changed DMAC fifo size and wfifo reset signal source
...
- changed DMAC FIFO size to 16, as it should be large enough
- connected wfifo reset to adc_rst from axi_ad9643 core
2015-04-28 14:58:04 +03:00
Adrian Costina
Rejeesh Kutty
dbogdan
Istvan Csomortani