// -------------------------------------------------------------
//
// Module: cic_interp
// Generated by MATLAB(R) 9.0 and the Filter Design HDL Coder 3.0.
// Generated on: 2016-07-05 11:08:04
// -------------------------------------------------------------

// -------------------------------------------------------------
// HDL Code Generation Options:
//
// OptimizeForHDL: on
// EDAScriptGeneration: off
// AddPipelineRegisters: on
// Name: cic_interp
// AddRatePort: on
// InputDataType: numerictype(1,31,30)
// TargetLanguage: Verilog
// TestBenchName: cicinterpfilt_copy_tb
// TestBenchStimulus: step ramp chirp noise
// GenerateHDLTestBench: off

// -------------------------------------------------------------
// HDL Implementation    : Fully parallel
// -------------------------------------------------------------
// Filter Settings:
//
// Discrete-Time FIR Multirate Filter (real)
// -----------------------------------------
// Filter Structure      : Cascaded Integrator-Comb Interpolator
// Interpolation Factor  : 50000
// Differential Delay    : 1
// Number of Sections    : 6
// Stable                : Yes
// Linear Phase          : No
//
// -------------------------------------------------------------

`timescale 1 ns / 1 ns

module cic_interp (
  input  clk,
  input  clk_enable,
  input  reset,
  input  signed [30:0] filter_in, //sfix31_En30
  input  [15:0] rate, //ufix16
  input  load_rate,
  output signed [109:0] filter_out, //sfix110_En30
  output ce_out
);

////////////////////////////////////////////////////////////////
//Module Architecture: cic_interp
////////////////////////////////////////////////////////////////
  // Local Functions
  // Type Definitions
  // Constants
  parameter signed [35:0] zeroconst = 36'h000000000; //sfix36_En30
  // Signals
  wire [15:0] rate_unsigned; // ufix16
  reg  [15:0] cur_count = 0; // ufix16
  wire phase_0; // boolean
  //
  reg  signed [30:0] input_register = 0; // sfix31_En30
  //   -- Section 1 Signals
  wire signed [30:0] section_in1; // sfix31_En30
  wire signed [31:0] section_cast1; // sfix32_En30
  reg  signed [31:0] diff1 = 0; // sfix32_En30
  wire signed [31:0] section_out1; // sfix32_En30
  wire signed [31:0] sub_cast; // sfix32_En30
  wire signed [31:0] sub_cast_1; // sfix32_En30
  wire signed [32:0] sub_temp; // sfix33_En30
  reg  signed [31:0] cic_pipeline1 = 0; // sfix32_En30
  //   -- Section 2 Signals
  wire signed [31:0] section_in2; // sfix32_En30
  wire signed [32:0] section_cast2; // sfix33_En30
  reg  signed [32:0] diff2 = 0; // sfix33_En30
  wire signed [32:0] section_out2; // sfix33_En30
  wire signed [32:0] sub_cast_2; // sfix33_En30
  wire signed [32:0] sub_cast_3; // sfix33_En30
  wire signed [33:0] sub_temp_1; // sfix34_En30
  reg  signed [32:0] cic_pipeline2 = 0; // sfix33_En30
  //   -- Section 3 Signals
  wire signed [32:0] section_in3; // sfix33_En30
  wire signed [33:0] section_cast3; // sfix34_En30
  reg  signed [33:0] diff3 = 0; // sfix34_En30
  wire signed [33:0] section_out3; // sfix34_En30
  wire signed [33:0] sub_cast_4; // sfix34_En30
  wire signed [33:0] sub_cast_5; // sfix34_En30
  wire signed [34:0] sub_temp_2; // sfix35_En30
  reg  signed [33:0] cic_pipeline3 = 0; // sfix34_En30
  //   -- Section 4 Signals
  wire signed [33:0] section_in4; // sfix34_En30
  wire signed [34:0] section_cast4; // sfix35_En30
  reg  signed [34:0] diff4 = 0; // sfix35_En30
  wire signed [34:0] section_out4; // sfix35_En30
  wire signed [34:0] sub_cast_6; // sfix35_En30
  wire signed [34:0] sub_cast_7; // sfix35_En30
  wire signed [35:0] sub_temp_3; // sfix36_En30
  reg  signed [34:0] cic_pipeline4 = 0; // sfix35_En30
  //   -- Section 5 Signals
  wire signed [34:0] section_in5; // sfix35_En30
  wire signed [35:0] section_cast5; // sfix36_En30
  reg  signed [35:0] diff5 = 0; // sfix36_En30
  wire signed [35:0] section_out5; // sfix36_En30
  wire signed [35:0] sub_cast_8; // sfix36_En30
  wire signed [35:0] sub_cast_9; // sfix36_En30
  wire signed [36:0] sub_temp_4; // sfix37_En30
  reg  signed [35:0] cic_pipeline5 = 0; // sfix36_En30
  //   -- Section 6 Signals
  wire signed [35:0] section_in6; // sfix36_En30
  reg  signed [35:0] diff6 = 0; // sfix36_En30
  wire signed [35:0] section_out6; // sfix36_En30
  wire signed [35:0] sub_cast_10; // sfix36_En30
  wire signed [35:0] sub_cast_11; // sfix36_En30
  wire signed [36:0] sub_temp_5; // sfix37_En30
  reg  signed [35:0] cic_pipeline6 = 0; // sfix36_En30
  wire signed [35:0] upsampling; // sfix36_En30
  //   -- Section 7 Signals
  wire signed [35:0] section_in7; // sfix36_En30
  wire signed [35:0] sum1; // sfix36_En30
  reg  signed [35:0] section_out7 = 0; // sfix36_En30
  wire signed [35:0] add_cast; // sfix36_En30
  wire signed [35:0] add_cast_1; // sfix36_En30
  wire signed [36:0] add_temp; // sfix37_En30
  //   -- Section 8 Signals
  wire signed [35:0] section_in8; // sfix36_En30
  wire signed [50:0] section_cast8; // sfix51_En30
  wire signed [50:0] sum2; // sfix51_En30
  reg  signed [50:0] section_out8 = 0; // sfix51_En30
  wire signed [50:0] add_cast_2; // sfix51_En30
  wire signed [50:0] add_cast_3; // sfix51_En30
  wire signed [51:0] add_temp_1; // sfix52_En30
  //   -- Section 9 Signals
  wire signed [50:0] section_in9; // sfix51_En30
  wire signed [65:0] section_cast9; // sfix66_En30
  wire signed [65:0] sum3; // sfix66_En30
  reg  signed [65:0] section_out9 = 0; // sfix66_En30
  wire signed [65:0] add_cast_4; // sfix66_En30
  wire signed [65:0] add_cast_5; // sfix66_En30
  wire signed [66:0] add_temp_2; // sfix67_En30
  //   -- Section 10 Signals
  wire signed [65:0] section_in10; // sfix66_En30
  wire signed [79:0] section_cast10; // sfix80_En30
  wire signed [79:0] sum4; // sfix80_En30
  reg  signed [79:0] section_out10 = 0; // sfix80_En30
  wire signed [79:0] add_cast_6; // sfix80_En30
  wire signed [79:0] add_cast_7; // sfix80_En30
  wire signed [80:0] add_temp_3; // sfix81_En30
  //   -- Section 11 Signals
  wire signed [79:0] section_in11; // sfix80_En30
  wire signed [94:0] section_cast11; // sfix95_En30
  wire signed [94:0] sum5; // sfix95_En30
  reg  signed [94:0] section_out11 = 0; // sfix95_En30
  wire signed [94:0] add_cast_8; // sfix95_En30
  wire signed [94:0] add_cast_9; // sfix95_En30
  wire signed [95:0] add_temp_4; // sfix96_En30
  //   -- Section 12 Signals
  wire signed [94:0] section_in12; // sfix95_En30
  wire signed [109:0] section_cast12; // sfix110_En30
  wire signed [109:0] sum6; // sfix110_En30
  reg  signed [109:0] section_out12 = 0; // sfix110_En30
  wire signed [109:0] add_cast_10; // sfix110_En30
  wire signed [109:0] add_cast_11; // sfix110_En30
  wire signed [110:0] add_temp_5; // sfix111_En30
  reg  [6:0] bitgain = 0; // ufix7
  wire signed [109:0] output_typeconvert; // sfix110_En30
  wire signed [109:0] muxinput_14; // sfix110_En16
  wire signed [109:0] muxinput_34; // sfix110_E4
  wire signed [109:0] muxinput_54; // sfix110_E24
  wire signed [109:0] muxinput_74; // sfix110_E44
  wire signed [109:0] muxinput_94; // sfix110_E64
  //
  reg  signed [109:0] output_register = 0; // sfix110_En30

  // Block Statements
  assign rate_unsigned = rate;

  always @ (posedge clk or posedge reset)
    begin: ce_output
      if (reset == 1'b1) begin
        cur_count <= 16'b0000000000000000;
      end
      else begin
        if (clk_enable == 1'b1) begin
          if (load_rate ==  1'b1) begin
            cur_count <= 16'b0000000000000001;
          end
          else if (cur_count == rate_unsigned - 1) begin
            cur_count <= 16'b0000000000000000;
          end
          else begin
            cur_count <= cur_count + 1;
          end
        end
      end
    end // ce_output

  assign  phase_0 = (cur_count == 16'b0000000000000000 && clk_enable == 1'b1)? 1 : 0;

  //   ------------------ Input Register ------------------

  always @ (posedge clk or posedge reset)
    begin: input_reg_process
      if (reset == 1'b1) begin
        input_register <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          input_register <= filter_in;
        end
      end
    end // input_reg_process

  //   ------------------ Section # 1 : Comb ------------------

  assign section_in1 = input_register;

  assign section_cast1 = $signed({{1{section_in1[30]}}, section_in1});

  assign sub_cast = section_cast1;
  assign sub_cast_1 = diff1;
  assign sub_temp = sub_cast - sub_cast_1;
  assign section_out1 = sub_temp[31:0];

  always @ (posedge clk or posedge reset)
    begin: comb_delay_section1
      if (reset == 1'b1) begin
        diff1 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          diff1 <= section_cast1;
        end
      end
    end // comb_delay_section1

  always @ (posedge clk or posedge reset)
    begin: cic_pipeline_process_section1
      if (reset == 1'b1) begin
        cic_pipeline1 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          cic_pipeline1 <= section_out1;
        end
      end
    end // cic_pipeline_process_section1

  //   ------------------ Section # 2 : Comb ------------------

  assign section_in2 = cic_pipeline1;

  assign section_cast2 = $signed({{1{section_in2[31]}}, section_in2});

  assign sub_cast_2 = section_cast2;
  assign sub_cast_3 = diff2;
  assign sub_temp_1 = sub_cast_2 - sub_cast_3;
  assign section_out2 = sub_temp_1[32:0];

  always @ (posedge clk or posedge reset)
    begin: comb_delay_section2
      if (reset == 1'b1) begin
        diff2 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          diff2 <= section_cast2;
        end
      end
    end // comb_delay_section2

  always @ (posedge clk or posedge reset)
    begin: cic_pipeline_process_section2
      if (reset == 1'b1) begin
        cic_pipeline2 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          cic_pipeline2 <= section_out2;
        end
      end
    end // cic_pipeline_process_section2

  //   ------------------ Section # 3 : Comb ------------------

  assign section_in3 = cic_pipeline2;

  assign section_cast3 = $signed({{1{section_in3[32]}}, section_in3});

  assign sub_cast_4 = section_cast3;
  assign sub_cast_5 = diff3;
  assign sub_temp_2 = sub_cast_4 - sub_cast_5;
  assign section_out3 = sub_temp_2[33:0];

  always @ (posedge clk or posedge reset)
    begin: comb_delay_section3
      if (reset == 1'b1) begin
        diff3 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          diff3 <= section_cast3;
        end
      end
    end // comb_delay_section3

  always @ (posedge clk or posedge reset)
    begin: cic_pipeline_process_section3
      if (reset == 1'b1) begin
        cic_pipeline3 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          cic_pipeline3 <= section_out3;
        end
      end
    end // cic_pipeline_process_section3

  //   ------------------ Section # 4 : Comb ------------------

  assign section_in4 = cic_pipeline3;

  assign section_cast4 = $signed({{1{section_in4[33]}}, section_in4});

  assign sub_cast_6 = section_cast4;
  assign sub_cast_7 = diff4;
  assign sub_temp_3 = sub_cast_6 - sub_cast_7;
  assign section_out4 = sub_temp_3[34:0];

  always @ (posedge clk or posedge reset)
    begin: comb_delay_section4
      if (reset == 1'b1) begin
        diff4 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          diff4 <= section_cast4;
        end
      end
    end // comb_delay_section4

  always @ (posedge clk or posedge reset)
    begin: cic_pipeline_process_section4
      if (reset == 1'b1) begin
        cic_pipeline4 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          cic_pipeline4 <= section_out4;
        end
      end
    end // cic_pipeline_process_section4

  //   ------------------ Section # 5 : Comb ------------------

  assign section_in5 = cic_pipeline4;

  assign section_cast5 = $signed({{1{section_in5[34]}}, section_in5});

  assign sub_cast_8 = section_cast5;
  assign sub_cast_9 = diff5;
  assign sub_temp_4 = sub_cast_8 - sub_cast_9;
  assign section_out5 = sub_temp_4[35:0];

  always @ (posedge clk or posedge reset)
    begin: comb_delay_section5
      if (reset == 1'b1) begin
        diff5 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          diff5 <= section_cast5;
        end
      end
    end // comb_delay_section5

  always @ (posedge clk or posedge reset)
    begin: cic_pipeline_process_section5
      if (reset == 1'b1) begin
        cic_pipeline5 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          cic_pipeline5 <= section_out5;
        end
      end
    end // cic_pipeline_process_section5

  //   ------------------ Section # 6 : Comb ------------------

  assign section_in6 = cic_pipeline5;

  assign sub_cast_10 = section_in6;
  assign sub_cast_11 = diff6;
  assign sub_temp_5 = sub_cast_10 - sub_cast_11;
  assign section_out6 = sub_temp_5[35:0];

  always @ (posedge clk or posedge reset)
    begin: comb_delay_section6
      if (reset == 1'b1) begin
        diff6 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          diff6 <= section_in6;
        end
      end
    end // comb_delay_section6

  always @ (posedge clk or posedge reset)
    begin: cic_pipeline_process_section6
      if (reset == 1'b1) begin
        cic_pipeline6 <= 0;
      end
      else begin
        if (phase_0 == 1'b1) begin
          cic_pipeline6 <= section_out6;
        end
      end
    end // cic_pipeline_process_section6

  assign upsampling = (phase_0 == 1'b1) ? cic_pipeline6 :
                zeroconst;
  //   ------------------ Section # 7 : Integrator ------------------

  assign section_in7 = upsampling;

  assign add_cast = section_in7;
  assign add_cast_1 = section_out7;
  assign add_temp = add_cast + add_cast_1;
  assign sum1 = add_temp[35:0];

  always @ (posedge clk or posedge reset)
    begin: integrator_delay_section7
      if (reset == 1'b1) begin
        section_out7 <= 0;
      end
      else begin
        if (clk_enable == 1'b1) begin
          section_out7 <= sum1;
        end
      end
    end // integrator_delay_section7

  //   ------------------ Section # 8 : Integrator ------------------

  assign section_in8 = section_out7;

  assign section_cast8 = $signed({{15{section_in8[35]}}, section_in8});

  assign add_cast_2 = section_cast8;
  assign add_cast_3 = section_out8;
  assign add_temp_1 = add_cast_2 + add_cast_3;
  assign sum2 = add_temp_1[50:0];

  always @ (posedge clk or posedge reset)
    begin: integrator_delay_section8
      if (reset == 1'b1) begin
        section_out8 <= 0;
      end
      else begin
        if (clk_enable == 1'b1) begin
          section_out8 <= sum2;
        end
      end
    end // integrator_delay_section8

  //   ------------------ Section # 9 : Integrator ------------------

  assign section_in9 = section_out8;

  assign section_cast9 = $signed({{15{section_in9[50]}}, section_in9});

  assign add_cast_4 = section_cast9;
  assign add_cast_5 = section_out9;
  assign add_temp_2 = add_cast_4 + add_cast_5;
  assign sum3 = add_temp_2[65:0];

  always @ (posedge clk or posedge reset)
    begin: integrator_delay_section9
      if (reset == 1'b1) begin
        section_out9 <= 0;
      end
      else begin
        if (clk_enable == 1'b1) begin
          section_out9 <= sum3;
        end
      end
    end // integrator_delay_section9

  //   ------------------ Section # 10 : Integrator ------------------

  assign section_in10 = section_out9;

  assign section_cast10 = $signed({{14{section_in10[65]}}, section_in10});

  assign add_cast_6 = section_cast10;
  assign add_cast_7 = section_out10;
  assign add_temp_3 = add_cast_6 + add_cast_7;
  assign sum4 = add_temp_3[79:0];

  always @ (posedge clk or posedge reset)
    begin: integrator_delay_section10
      if (reset == 1'b1) begin
        section_out10 <= 0;
      end
      else begin
        if (clk_enable == 1'b1) begin
          section_out10 <= sum4;
        end
      end
    end // integrator_delay_section10

  //   ------------------ Section # 11 : Integrator ------------------

  assign section_in11 = section_out10;

  assign section_cast11 = $signed({{15{section_in11[79]}}, section_in11});

  assign add_cast_8 = section_cast11;
  assign add_cast_9 = section_out11;
  assign add_temp_4 = add_cast_8 + add_cast_9;
  assign sum5 = add_temp_4[94:0];

  always @ (posedge clk or posedge reset)
    begin: integrator_delay_section11
      if (reset == 1'b1) begin
        section_out11 <= 0;
      end
      else begin
        if (clk_enable == 1'b1) begin
          section_out11 <= sum5;
        end
      end
    end // integrator_delay_section11

  //   ------------------ Section # 12 : Integrator ------------------

  assign section_in12 = section_out11;

  assign section_cast12 = $signed({{15{section_in12[94]}}, section_in12});

  assign add_cast_10 = section_cast12;
  assign add_cast_11 = section_out12;
  assign add_temp_5 = add_cast_10 + add_cast_11;
  assign sum6 = add_temp_5[109:0];

  always @ (posedge clk or posedge reset)
    begin: integrator_delay_section12
      if (reset == 1'b1) begin
        section_out12 <= 0;
      end
      else begin
        if (clk_enable == 1'b1) begin
          section_out12 <= sum6;
        end
      end
    end // integrator_delay_section12

  always @(rate_unsigned)
  begin
    case(rate_unsigned)
      16'b0000000000000101 : bitgain = 7'b0001110;
      16'b0000000000110010 : bitgain = 7'b0100010;
      16'b0000000111110100 : bitgain = 7'b0110110;
      16'b0001001110001000 : bitgain = 7'b1001010;
      16'b1100001101010000 : bitgain = 7'b1011110;
      default : bitgain = 7'b1011110;
    endcase
  end

  assign muxinput_14 = $signed({{10{section_out12[109]}}, section_out12[109:10]});

  assign muxinput_34 = $signed({{27{section_out12[109]}}, section_out12[109:27]});

  assign muxinput_54 = $signed({{43{section_out12[109]}}, section_out12[109:43]});

  assign muxinput_74 = $signed({{60{section_out12[109]}}, section_out12[109:60]});

  assign muxinput_94 = $signed({{77{section_out12[109]}}, section_out12[109:77]});

  assign output_typeconvert = (bitgain == 7'b0001110) ? muxinput_14 :
                             (bitgain == 7'b0100010) ? muxinput_34 :
                             (bitgain == 7'b0110110) ? muxinput_54 :
                             (bitgain == 7'b1001010) ? muxinput_74 :
                             muxinput_94;
  //   ------------------ Output Register ------------------

  always @ (posedge clk or posedge reset)
    begin: output_reg_process
      if (reset == 1'b1) begin
        output_register <= 0;
      end
      else begin
        if (clk_enable == 1'b1) begin
          output_register <= output_typeconvert;
        end
      end
    end // output_reg_process

  // Assignment Statements
  assign ce_out = phase_0;
  assign filter_out = output_register;
endmodule