// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//     - Redistributions of source code must retain the above copyright
//       notice, this list of conditions and the following disclaimer.
//     - Redistributions in binary form must reproduce the above copyright
//       notice, this list of conditions and the following disclaimer in
//       the documentation and/or other materials provided with the
//       distribution.
//     - Neither the name of Analog Devices, Inc. nor the names of its
//       contributors may be used to endorse or promote products derived
//       from this software without specific prior written permission.
//     - The use of this software may or may not infringe the patent rights
//       of one or more patent holders.  This license does not release you
//       from the requirement that you obtain separate licenses from these
//       patent holders to use this software.
//     - Use of the software either in source or binary form, must be run
//       on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module system_top (

  // clock and resets

  input             sys_clk,
  input             sys_resetn,

  // ddr3

  output            ddr3_clk_p,
  output            ddr3_clk_n,
  output  [ 14:0]   ddr3_a,
  output  [  2:0]   ddr3_ba,
  output            ddr3_cke,
  output            ddr3_cs_n,
  output            ddr3_odt,
  output            ddr3_reset_n,
  output            ddr3_we_n,
  output            ddr3_ras_n,
  output            ddr3_cas_n,
  inout   [  7:0]   ddr3_dqs_p,
  inout   [  7:0]   ddr3_dqs_n,
  inout   [ 63:0]   ddr3_dq,
  output  [  7:0]   ddr3_dm,
  input             ddr3_rzq,
  input             ddr3_ref_clk,

  // ethernet

  input             eth_ref_clk,
  input             eth_rxd,
  output            eth_txd,
  output            eth_mdc,
  inout             eth_mdio,
  output            eth_resetn,
  input             eth_intn,

  // board gpio

  input   [ 10:0]   gpio_bd_i,
  output  [ 15:0]   gpio_bd_o,

  // lane interface

  input             ref_clk0,
  input             ref_clk1,
  input   [  3:0]   rx_data,
  output  [  3:0]   tx_data,
  output            rx_sync,
  output            rx_os_sync,
  input             tx_sync,
  input             sysref,

  output            ad9528_reset_b,
  output            ad9528_sysref_req,
  output            ad9371_tx1_enable,
  output            ad9371_tx2_enable,
  output            ad9371_rx1_enable,
  output            ad9371_rx2_enable,
  output            ad9371_test,
  output            ad9371_reset_b,
  input             ad9371_gpint,

  inout   [ 18:0]   ad9371_gpio,

  output            spi_csn_ad9528,
  output            spi_csn_ad9371,
  output            spi_clk,
  output            spi_mosi,
  input             spi_miso);

  // internal signals

  wire              eth_reset;
  wire              eth_mdio_i;
  wire              eth_mdio_o;
  wire              eth_mdio_t;
  wire    [ 63:0]   gpio_i;
  wire    [ 63:0]   gpio_o;
  wire    [  7:0]   spi_csn_s;
  wire              ad9371_tx_fifo_bypass;

  // assignments

  assign spi_csn_ad9371 = spi_csn_s[0];
  assign spi_csn_ad9528 = spi_csn_s[1];

  // gpio (ad9371)

  assign gpio_i[63:58] = gpio_o[63:58];

  assign ad9371_tx_fifo_bypass = gpio_o[57];
  assign gpio_i[57:57] = gpio_o[57];

  assign gpio_i[56:56] = ad9371_gpint;

  assign gpio_i[55:48] = gpio_o[55:48];
  assign ad9371_tx1_enable = gpio_o[55];
  assign ad9371_tx2_enable = gpio_o[54];
  assign ad9371_rx1_enable = gpio_o[53];
  assign ad9371_rx2_enable = gpio_o[52];
  assign ad9371_test = gpio_o[51];
  assign ad9371_reset_b = gpio_o[50];
  assign ad9528_sysref_req = gpio_o[49];
  assign ad9528_reset_b = gpio_o[48];

  assign gpio_i[47:32] = gpio_o[47:32];

  // board stuff

  assign eth_resetn = ~eth_reset;
  assign eth_mdio_i = eth_mdio;
  assign eth_mdio = (eth_mdio_t == 1'b1) ? 1'bz : eth_mdio_o;

  assign ddr3_a[14:12] = 3'd0;

  assign gpio_i[31:27] = gpio_o[31:27];
  assign gpio_i[26:16] = gpio_bd_i;
  assign gpio_i[15: 0] = gpio_o[15:0];

  assign gpio_bd_o = gpio_o[15:0];

  system_bd i_system_bd (
    .avl_ad9371_gpio_export(ad9371_gpio),
    .rx_data_0_rx_serial_data (rx_data[0]),
    .rx_data_1_rx_serial_data (rx_data[1]),
    .rx_data_2_rx_serial_data (rx_data[2]),
    .rx_data_3_rx_serial_data (rx_data[3]),
    .rx_os_ref_clk_clk (ref_clk1),
    .rx_os_sync_export (rx_os_sync),
    .rx_os_sysref_export (sysref),
    .rx_ref_clk_clk (ref_clk1),
    .rx_sync_export (rx_sync),
    .rx_sysref_export (sysref),
    .sys_clk_clk (sys_clk),
    .sys_ddr3_cntrl_mem_mem_ck (ddr3_clk_p),
    .sys_ddr3_cntrl_mem_mem_ck_n (ddr3_clk_n),
    .sys_ddr3_cntrl_mem_mem_a (ddr3_a[11:0]),
    .sys_ddr3_cntrl_mem_mem_ba (ddr3_ba),
    .sys_ddr3_cntrl_mem_mem_cke (ddr3_cke),
    .sys_ddr3_cntrl_mem_mem_cs_n (ddr3_cs_n),
    .sys_ddr3_cntrl_mem_mem_odt (ddr3_odt),
    .sys_ddr3_cntrl_mem_mem_reset_n (ddr3_reset_n),
    .sys_ddr3_cntrl_mem_mem_we_n (ddr3_we_n),
    .sys_ddr3_cntrl_mem_mem_ras_n (ddr3_ras_n),
    .sys_ddr3_cntrl_mem_mem_cas_n (ddr3_cas_n),
    .sys_ddr3_cntrl_mem_mem_dqs (ddr3_dqs_p[7:0]),
    .sys_ddr3_cntrl_mem_mem_dqs_n (ddr3_dqs_n[7:0]),
    .sys_ddr3_cntrl_mem_mem_dq (ddr3_dq[63:0]),
    .sys_ddr3_cntrl_mem_mem_dm (ddr3_dm[7:0]),
    .sys_ddr3_cntrl_oct_oct_rzqin (ddr3_rzq),
    .sys_ddr3_cntrl_pll_ref_clk_clk (ddr3_ref_clk),
    .sys_ethernet_mdio_mdc (eth_mdc),
    .sys_ethernet_mdio_mdio_in (eth_mdio_i),
    .sys_ethernet_mdio_mdio_out (eth_mdio_o),
    .sys_ethernet_mdio_mdio_oen (eth_mdio_t),
    .sys_ethernet_ref_clk_clk (eth_ref_clk),
    .sys_ethernet_reset_reset (eth_reset),
    .sys_ethernet_sgmii_rxp_0 (eth_rxd),
    .sys_ethernet_sgmii_txp_0 (eth_txd),
    .sys_gpio_bd_in_port (gpio_i[31:0]),
    .sys_gpio_bd_out_port (gpio_o[31:0]),
    .sys_gpio_in_export (gpio_i[63:32]),
    .sys_gpio_out_export (gpio_o[63:32]),
    .sys_rst_reset_n (sys_resetn),
    .sys_spi_MISO (spi_miso),
    .sys_spi_MOSI (spi_mosi),
    .sys_spi_SCLK (spi_clk),
    .sys_spi_SS_n (spi_csn_s),
    .tx_data_0_tx_serial_data (tx_data[0]),
    .tx_data_1_tx_serial_data (tx_data[1]),
    .tx_data_2_tx_serial_data (tx_data[2]),
    .tx_data_3_tx_serial_data (tx_data[3]),
    .tx_fifo_bypass_bypass (ad9371_tx_fifo_bypass),
    .tx_ref_clk_clk (ref_clk1),
    .tx_sync_export (tx_sync),
    .tx_sysref_export (sysref));

endmodule

// ***************************************************************************
// ***************************************************************************