## FIFO depth is 1GB, PL_DDR is used
set adc_fifo_address_width 16

## FIFO depth is 8Mb - 500k samples
set dac_fifo_address_width 16

## NOTE: With this configuration the #36Kb BRAM utilization is at ~47%

source $ad_hdl_dir/projects/common/zc706/zc706_system_bd.tcl
source $ad_hdl_dir/projects/common/zc706/zc706_plddr3_adcfifo_bd.tcl
source $ad_hdl_dir/projects/common/xilinx/dacfifo_bd.tcl
source ../common/daq3_bd.tcl
source $ad_hdl_dir/projects/scripts/adi_pd.tcl

set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;

#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9

sysid_gen_sys_init_file