############################################################################### ## Copyright (C) 2019-2023 Analog Devices, Inc. All rights reserved. ### SPDX short identifier: ADIBSD ############################################################################### source ../../../scripts/adi_env.tcl source $ad_hdl_dir/projects/scripts/adi_project_xilinx.tcl source $ad_hdl_dir/projects/scripts/adi_board.tcl ##----------------------------------------------------------------------------- # IMPORTANT: Set interface mode # # The get_env_param procedure retrieves parameter value from the environment if # exists, other case returns the default value specified in its second parameter # field. # # How to use over-writable parameters from the environment: # # e.g. # make ADI_PRODUCTION = 1 # # ADI_PRODUCTION - Defines the interface type (XMICROWAVE or FMCXMWBR1) # # LEGEND: 0 - XMICROWAVE - uses all the spi lines and gpios # 1 - FMCXMWBR1 - used for production testing # ##----------------------------------------------------------------------------- set intf 0 if {[info exists ::env(ADI_PRODUCTION)]} { set intf $::env(ADI_PRODUCTION) } else { set env(ADI_PRODUCTION) $intf } adi_project_create adrv9009zu11eg_fmcxmwbr1 0 [list \ RX_JESD_M [get_env_param RX_JESD_M 8] \ RX_JESD_L [get_env_param RX_JESD_L 4] \ RX_JESD_S [get_env_param RX_JESD_S 1] \ TX_JESD_M [get_env_param TX_JESD_M 8] \ TX_JESD_L [get_env_param TX_JESD_L 8] \ TX_JESD_S [get_env_param TX_JESD_S 1] \ RX_OS_JESD_M [get_env_param RX_OS_JESD_M 4] \ RX_OS_JESD_L [get_env_param RX_OS_JESD_L 4] \ RX_OS_JESD_S [get_env_param RX_OS_JESD_S 1] \ ] "xczu11eg-ffvf1517-2-i" adi_project_files adrv9009zu11eg_fmcxmwbr1 [list \ "system_constr.xdc"\ "../common/adrv9009zu11eg_spi.v" \ "../common/adrv9009zu11eg_constr.xdc" \ "../common/adrv2crr_fmc_constr.xdc" \ "$ad_hdl_dir/library/common/ad_iobuf.v" ] switch $intf { 0 { adi_project_files adrv9009zu11eg_fmcxmwbr1 [list \ "system_top_xmicrowave.v" ] } 1 { adi_project_files adrv9009zu11eg_fmcxmwbr1 [list \ "system_top_fmcxmwbr1.v" ] } } ## To improve timing in DDR4 MIG set_property strategy Performance_ExploreWithRemap [get_runs impl_1] adi_project_run adrv9009zu11eg_fmcxmwbr1