// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory
//      of this repository (LICENSE_GPL2), and also online at:
//      <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
//   2. An ADI specific BSD license, which can be found in the top level directory
//      of this repository (LICENSE_ADIBSD), and also on-line at:
//      https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
//      This will allow to generate bit files and not release the source code,
//      as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module ad_dds_1 #(

  // parameters

  parameter   DDS_TYPE = 1,
  parameter   CORDIC_DW = 16,
  parameter   CORDIC_PHASE_DW = 16) (

  // interface

  input                   clk,
  input       [15:0]      angle,
  input       [15:0]      scale,
  output  reg [15:0]      dds_data);

  // local parameters

  localparam DDS_CORDIC_TYPE = 1;
  localparam DDS_POLINOMIAL_TYPE = 2;

  // internal signals

  wire    [CORDIC_DW-1:0] sine_s;
  wire    [         15:0] sine16_s;
  wire    [          3:0] zeros;
  wire    [         33:0] s1_data_s;

  assign zeros = 0;

  // sine

  generate
    if (DDS_TYPE == DDS_CORDIC_TYPE) begin

      // the cordic module input angle width must be equal with it's width
      wire    [CORDIC_PHASE_DW:0] angle_s;

      if (CORDIC_PHASE_DW >= 16) begin
        assign angle_s = {angle,{CORDIC_PHASE_DW-15{1'b0}}};
      end else begin
        assign angle_s = {angle[15:16-CORDIC_PHASE_DW],1'b0};
      end
      if (CORDIC_DW >= 16) begin
        assign sine16_s = sine_s[CORDIC_DW-1:CORDIC_DW-16];
      end else begin
        assign sine16_s = {sine_s,zeros[15-CORDIC_DW:0]};
      end

      ad_dds_sine_cordic #(
        .CORDIC_DW(CORDIC_DW),
        .PHASE_DW(CORDIC_PHASE_DW),
        .DELAY_DW(1))
      i_dds_sine (
        .clk (clk),
        .angle (angle_s[CORDIC_PHASE_DW:1]),
        .sine (sine_s),
        .cosine (),
        .ddata_in (1'b0),
        .ddata_out ());

    end else begin

      assign sine16_s = sine_s;
      ad_dds_sine i_dds_sine (
        .clk (clk),
        .angle (angle),
        .sine (sine_s),
        .ddata_in (1'b0),
        .ddata_out ());
    end
  endgenerate

  // scale for a 16 bit sine generator

  ad_mul #(.DELAY_DATA_WIDTH(1)) i_dds_scale (
    .clk (clk),
    .data_a ({sine16_s[15], sine16_s}),
    .data_b ({scale[15], scale}),
    .data_p (s1_data_s),
    .ddata_in (1'b0),
    .ddata_out ());

  // dds data

  always @(posedge clk) begin
    dds_data <= s1_data_s[29:14];
  end

endmodule

// ***************************************************************************
// ***************************************************************************