<: :>
<: set ComponentName [getComponentNameString] :>
<: setOutputDirectory "./sim/" :>
<: setFileName ${ComponentName}_pkg :>
<: setFileExtension ".sv" :>
<: set id                      [get_property MODELPARAM_VALUE.ID] :>
<: set dma_data_width_src      [get_property MODELPARAM_VALUE.DMA_DATA_WIDTH_SRC] :>
<: set dma_data_width_dest     [get_property MODELPARAM_VALUE.DMA_DATA_WIDTH_DEST] :>
<: set dma_length_width        [get_property MODELPARAM_VALUE.DMA_LENGTH_WIDTH] :>
<: set dma_2d_transfer         [get_property MODELPARAM_VALUE.DMA_2D_TRANSFER] :>
<: set async_clk_req_src       [get_property MODELPARAM_VALUE.ASYNC_CLK_REQ_SRC] :>
<: set async_clk_src_dest      [get_property MODELPARAM_VALUE.ASYNC_CLK_SRC_DEST] :>
<: set async_clk_dest_req      [get_property MODELPARAM_VALUE.ASYNC_CLK_DEST_REQ] :>
<: set axi_slice_dest          [get_property MODELPARAM_VALUE.AXI_SLICE_DEST] :>
<: set axi_slice_src           [get_property MODELPARAM_VALUE.AXI_SLICE_SRC] :>
<: set sync_transfer_start     [get_property MODELPARAM_VALUE.SYNC_TRANSFER_START] :>
<: set cyclic                  [get_property MODELPARAM_VALUE.CYCLIC] :>
<: set dma_axi_protocol_dest   [get_property MODELPARAM_VALUE.DMA_AXI_PROTOCOL_DEST] :>
<: set dma_axi_protocol_src    [get_property MODELPARAM_VALUE.DMA_AXI_PROTOCOL_SRC] :>
<: set dma_type_dest           [get_property MODELPARAM_VALUE.DMA_TYPE_DEST] :>
<: set dma_type_src            [get_property MODELPARAM_VALUE.DMA_TYPE_SRC] :>
<: set dma_axi_addr_width      [get_property MODELPARAM_VALUE.DMA_AXI_ADDR_WIDTH] :>
<: set max_bytes_per_burst     [get_property MODELPARAM_VALUE.MAX_BYTES_PER_BURST] :>
<: set fifo_size               [get_property MODELPARAM_VALUE.FIFO_SIZE] :>
<: set axi_id_width_src        [get_property MODELPARAM_VALUE.AXI_ID_WIDTH_SRC] :>
<: set axi_id_width_dest       [get_property MODELPARAM_VALUE.AXI_ID_WIDTH_DEST] :>
<: set disable_debug_registers [get_property MODELPARAM_VALUE.DISABLE_DEBUG_REGISTERS] :>

<: proc b2i {b} { if {$b==true} {return 1} else {return 0}} :>
///////////////////////////////////////////////////////////////////////////
//NOTE: This file has been automatically generated by Vivado.
///////////////////////////////////////////////////////////////////////////

package <=: ComponentName :>_pkg;

///////////////////////////////////////////////////////////////////////////
// These parameters are named after the component for use in your verification
// environment.
///////////////////////////////////////////////////////////////////////////
  parameter <=: ComponentName :>_ID                      = <=: $id :>;
  parameter <=: ComponentName :>_DMA_DATA_WIDTH_SRC      = <=: $dma_data_width_src :>;
  parameter <=: ComponentName :>_DMA_DATA_WIDTH_DEST     = <=: $dma_data_width_dest :>;
  parameter <=: ComponentName :>_DMA_LENGTH_WIDTH        = <=: $dma_length_width :>;
  parameter <=: ComponentName :>_DMA_2D_TRANSFER         = <=: b2i $dma_2d_transfer :>;
  parameter <=: ComponentName :>_ASYNC_CLK_REQ_SRC       = <=: b2i $async_clk_req_src :>;
  parameter <=: ComponentName :>_ASYNC_CLK_SRC_DEST      = <=: b2i $async_clk_src_dest :>;
  parameter <=: ComponentName :>_ASYNC_CLK_DEST_REQ      = <=: b2i $async_clk_dest_req :>;
  parameter <=: ComponentName :>_AXI_SLICE_DEST          = <=: b2i $axi_slice_dest :>;
  parameter <=: ComponentName :>_AXI_SLICE_SRC           = <=: b2i $axi_slice_src :>;
  parameter <=: ComponentName :>_SYNC_TRANSFER_START     = <=: b2i $sync_transfer_start :>;
  parameter <=: ComponentName :>_CYCLIC                  = <=: b2i $cyclic :>;
  parameter <=: ComponentName :>_DMA_AXI_PROTOCOL_DEST   = <=: $dma_axi_protocol_dest :>;
  parameter <=: ComponentName :>_DMA_AXI_PROTOCOL_SRC    = <=: $dma_axi_protocol_src :>;
  parameter <=: ComponentName :>_DMA_TYPE_DEST           = <=: $dma_type_dest :>;
  parameter <=: ComponentName :>_DMA_TYPE_SRC            = <=: $dma_type_src :>;
  parameter <=: ComponentName :>_DMA_AXI_ADDR_WIDTH      = <=: $dma_axi_addr_width :>;
  parameter <=: ComponentName :>_MAX_BYTES_PER_BURST     = <=: $max_bytes_per_burst :>;
  parameter <=: ComponentName :>_FIFO_SIZE               = <=: $fifo_size :>;
  parameter <=: ComponentName :>_AXI_ID_WIDTH_SRC        = <=: $axi_id_width_src :>;
  parameter <=: ComponentName :>_AXI_ID_WIDTH_DEST       = <=: $axi_id_width_dest :>;
  parameter <=: ComponentName :>_DISABLE_DEBUG_REGISTERS = <=: b2i $disable_debug_registers :>;
//////////////////////////////////////////////////////////////////////////

endpackage : <=: ComponentName :>_pkg