source ../../../scripts/adi_env.tcl source ../../scripts/adi_project_intel.tcl # get_env_param retrieves parameter value from the environment if exists, # other case use the default value # # Use over-writable parameters from the environment. # # e.g. # make RX_LANE_RATE=10 TX_LANE_RATE=10 RX_JESD_L=4 RX_JESD_M=8 RX_JESD_S=1 RX_JESD_NP=16 TX_JESD_L=4 TX_JESD_M=8 TX_JESD_S=1 TX_JESD_NP=16 # make RX_LANE_RATE=2.5 TX_LANE_RATE=2.5 RX_JESD_L=8 RX_JESD_M=4 RX_JESD_S=1 RX_JESD_NP=16 TX_JESD_L=8 TX_JESD_M=4 TX_JESD_S=1 TX_JESD_NP=16 # make RX_LANE_RATE=10 TX_LANE_RATE=10 RX_JESD_L=2 RX_JESD_M=8 RX_JESD_S=1 RX_JESD_NP=12 TX_JESD_L=2 TX_JESD_M=8 TX_JESD_S=1 TX_JESD_NP=12 # # Lane Rate = I/Q Sample Rate x M x N' x (10 \ 8) \ L # Parameter description: # # RX_LANE_RATE : Lane rate of the Rx link ( MxFE to FPGA ) # TX_LANE_RATE : Lane rate of the Tx link ( FPGA to MxFE ) # [RX/TX]_JESD_M : Number of converters per link # [RX/TX]_JESD_L : Number of lanes per link # [RX/TX]_JESD_S : Number of samples per frame # [RX/TX]_JESD_NP : Number of bits per sample # [RX/TX]_NUM_LINKS : Number of links # [RX/TX]_KS_PER_CHANNEL : Number of samples stored in internal buffers in kilosamples per converter (M) # adi_project ad9081_fmca_ebz_a10soc [list \ RX_LANE_RATE [get_env_param RX_LANE_RATE 10 ] \ TX_LANE_RATE [get_env_param TX_LANE_RATE 10 ] \ RX_JESD_M [get_env_param RX_JESD_M 8 ] \ RX_JESD_L [get_env_param RX_JESD_L 4 ] \ RX_JESD_S [get_env_param RX_JESD_S 1 ] \ RX_JESD_NP [get_env_param RX_JESD_NP 16 ] \ RX_NUM_LINKS [get_env_param RX_NUM_LINKS 1 ] \ TX_JESD_M [get_env_param TX_JESD_M 8 ] \ TX_JESD_L [get_env_param TX_JESD_L 4 ] \ TX_JESD_S [get_env_param TX_JESD_S 1 ] \ TX_JESD_NP [get_env_param TX_JESD_NP 16 ] \ TX_NUM_LINKS [get_env_param TX_NUM_LINKS 1 ] \ RX_KS_PER_CHANNEL [get_env_param RX_KS_PER_CHANNEL 32 ] \ TX_KS_PER_CHANNEL [get_env_param TX_KS_PER_CHANNEL 32 ] \ ] source $ad_hdl_dir/projects/common/a10soc/a10soc_system_assign.tcl # files set_global_assignment -name VERILOG_FILE ../../../library/common/ad_3w_spi.v # Note: This projects requires a hardware rework to function correctly. # The rework connects FMC header pins directly to the FPGA so that they can be # accessed by the fabric. # # Changes required: # R610: DNI -> R0 PIN_E12 # R611: DNI -> R0 PIN_E13 # R612: R0 -> DNI # R613: R0 -> DNI # R620: DNI -> R0 PIN_F13 # R632: DNI -> R0 PIN_F14 # R621: R0 -> DNI # R633: R0 -> DNI # R574: DNI -> R0 PIN_W5 # R577: DNI -> R0 PIN_W6 # R576: R0 -> DNI # R575: R0 -> DNI set_location_assignment PIN_F9 -to "agc0[0]" ; ## D20 LA17_CC_P set_location_assignment PIN_G9 -to "agc0[1]" ; ## D21 LA17_CC_N set_location_assignment PIN_G7 -to "agc1[0]" ; ## C22 LA18_CC_P set_location_assignment PIN_H7 -to "agc1[1]" ; ## C23 LA18_CC_N set_location_assignment PIN_C3 -to "agc2[0]" ; ## G21 LA20_P set_location_assignment PIN_C4 -to "agc2[1]" ; ## G22 LA20_N set_location_assignment PIN_C2 -to "agc3[0]" ; ## H25 LA21_P set_location_assignment PIN_D3 -to "agc3[1]" ; ## H26 LA21_N set_location_assignment PIN_W6 -to "clkin6(n)" ; ## G03 CLK1_M2C_N set_location_assignment PIN_W5 -to "clkin6" ; ## G02 CLK1_M2C_P set_location_assignment PIN_N28 -to "fpga_refclk_in(n)" ; ## D05 GBTCLK0_M2C_N set_location_assignment PIN_N29 -to "fpga_refclk_in" ; ## D04 GBTCLK0_M2C_P set_location_assignment PIN_P34 -to "rx_data[2](n)" ; ## A07 DP2_M2C_N set_location_assignment PIN_P35 -to "rx_data[2]" ; ## A06 DP2_M2C_P set_location_assignment PIN_T30 -to "rx_data[0](n)" ; ## C07 DP0_M2C_N set_location_assignment PIN_T31 -to "rx_data[0]" ; ## C06 DP0_M2C_P set_location_assignment PIN_L32 -to "rx_data[7](n)" ; ## B13 DP7_M2C_N set_location_assignment PIN_L33 -to "rx_data[7]" ; ## B12 DP7_M2C_P set_location_assignment PIN_M30 -to "rx_data[6](n)" ; ## B17 DP6_M2C_N set_location_assignment PIN_M31 -to "rx_data[6]" ; ## B16 DP6_M2C_P set_location_assignment PIN_M34 -to "rx_data[5](n)" ; ## A19 DP5_M2C_N set_location_assignment PIN_M35 -to "rx_data[5]" ; ## A18 DP5_M2C_P set_location_assignment PIN_N32 -to "rx_data[4](n)" ; ## A15 DP4_M2C_N set_location_assignment PIN_N33 -to "rx_data[4]" ; ## A14 DP4_M2C_P set_location_assignment PIN_P30 -to "rx_data[3](n)" ; ## A11 DP3_M2C_N set_location_assignment PIN_P31 -to "rx_data[3]" ; ## A10 DP3_M2C_P set_location_assignment PIN_R32 -to "rx_data[1](n)" ; ## A03 DP1_M2C_N set_location_assignment PIN_R33 -to "rx_data[1]" ; ## A02 DP1_M2C_P set_location_assignment PIN_N36 -to "tx_data[0](n)" ; ## C03 DP0_C2M_N set_location_assignment PIN_N37 -to "tx_data[0]" ; ## C02 DP0_C2M_P set_location_assignment PIN_L36 -to "tx_data[2](n)" ; ## A27 DP2_C2M_N set_location_assignment PIN_L37 -to "tx_data[2]" ; ## A26 DP2_C2M_P set_location_assignment PIN_F38 -to "tx_data[7](n)" ; ## B33 DP7_C2M_N set_location_assignment PIN_F39 -to "tx_data[7]" ; ## B32 DP7_C2M_P set_location_assignment PIN_G36 -to "tx_data[6](n)" ; ## B37 DP6_C2M_N set_location_assignment PIN_G37 -to "tx_data[6]" ; ## B36 DP6_C2M_P set_location_assignment PIN_M38 -to "tx_data[1](n)" ; ## A23 DP1_C2M_N set_location_assignment PIN_M39 -to "tx_data[1]" ; ## A22 DP1_C2M_P set_location_assignment PIN_H38 -to "tx_data[5](n)" ; ## A39 DP5_C2M_N set_location_assignment PIN_H39 -to "tx_data[5]" ; ## A38 DP5_C2M_P set_location_assignment PIN_J36 -to "tx_data[4](n)" ; ## A35 DP4_C2M_N set_location_assignment PIN_J37 -to "tx_data[4]" ; ## A34 DP4_C2M_P set_location_assignment PIN_K38 -to "tx_data[3](n)" ; ## A31 DP3_C2M_N set_location_assignment PIN_K39 -to "tx_data[3]" ; ## A30 DP3_C2M_P set_location_assignment PIN_D13 -to "fpga_syncin_0(n)" ; ## H08 LA02_N set_location_assignment PIN_C13 -to "fpga_syncin_0" ; ## H07 LA02_P set_location_assignment PIN_D14 -to "fpga_syncin_1_n" ; ## G10 LA03_N set_location_assignment PIN_C14 -to "fpga_syncin_1_p" ; ## G09 LA03_P set_location_assignment PIN_E13 -to "fpga_syncout_0(n)" ; ## D09 LA01_CC_N set_location_assignment PIN_E12 -to "fpga_syncout_0" ; ## D08 LA01_CC_P set_location_assignment PIN_B10 -to "fpga_syncout_1_n" ; ## C11 LA06_N set_location_assignment PIN_A10 -to "fpga_syncout_1_p" ; ## C10 LA06_P set_location_assignment PIN_D4 -to "gpio[0]" ; ## H19 LA15_P set_location_assignment PIN_D5 -to "gpio[1]" ; ## H20 LA15_N set_location_assignment PIN_G5 -to "gpio[2]" ; ## H22 LA19_P set_location_assignment PIN_G6 -to "gpio[3]" ; ## H23 LA19_N set_location_assignment PIN_J11 -to "gpio[4]" ; ## D17 LA13_P set_location_assignment PIN_K11 -to "gpio[5]" ; ## D18 LA13_N set_location_assignment PIN_J9 -to "gpio[6]" ; ## C18 LA14_P set_location_assignment PIN_J10 -to "gpio[7]" ; ## C19 LA14_N set_location_assignment PIN_D6 -to "gpio[8]" ; ## G18 LA16_P set_location_assignment PIN_E6 -to "gpio[9]" ; ## G19 LA16_N set_location_assignment PIN_G4 -to "gpio[10]" ; ## G25 LA22_N set_location_assignment PIN_D9 -to "hmc_gpio1" ; ## H17 LA11_N set_location_assignment PIN_B9 -to "hmc_sync" ; ## H14 LA07_N set_location_assignment PIN_B11 -to "irqb[0]" ; ## G12 LA08_P set_location_assignment PIN_B12 -to "irqb[1]" ; ## G13 LA08_N set_location_assignment PIN_A9 -to "rstb" ; ## H13 LA07_P set_location_assignment PIN_A7 -to "rxen[0]" ; ## C14 LA10_P set_location_assignment PIN_A8 -to "rxen[1]" ; ## C15 LA10_N set_location_assignment PIN_F13 -to "spi0_csb" ; ## D11 LA05_P set_location_assignment PIN_F14 -to "spi0_miso" ; ## D12 LA05_N set_location_assignment PIN_H12 -to "spi0_mosi" ; ## H10 LA04_P set_location_assignment PIN_H13 -to "spi0_sclk" ; ## H11 LA04_N set_location_assignment PIN_M12 -to "spi1_csb" ; ## G15 LA12_P set_location_assignment PIN_C9 -to "spi1_sclk" ; ## H16 LA11_P set_location_assignment PIN_N13 -to "spi1_sdio" ; ## G16 LA12_N set_location_assignment PIN_F5 -to "sysref2(n)" ; ## H05 CLK0_M2C_N set_location_assignment PIN_E5 -to "sysref2" ; ## H04 CLK0_M2C_P set_location_assignment PIN_A12 -to "txen[0]" ; ## D14 LA09_P set_location_assignment PIN_A13 -to "txen[1]" ; ## D15 LA09_N set_instance_assignment -name XCVR_VCCR_VCCT_VOLTAGE 1_0V -to rx_data set_instance_assignment -name XCVR_VCCR_VCCT_VOLTAGE 1_0V -to tx_data set_instance_assignment -name IO_STANDARD LVDS -to fpga_refclk_in set_instance_assignment -name IO_STANDARD LVDS -to clkin6 set_instance_assignment -name IO_STANDARD "HIGH SPEED DIFFERENTIAL I/O" -to rx_data set_instance_assignment -name IO_STANDARD "HIGH SPEED DIFFERENTIAL I/O" -to tx_data set common_lanes 0 set common_lanes [get_env_param RX_JESD_L 4] if {$common_lanes > [get_env_param TX_JESD_L 4]} { set common_lanes [get_env_param TX_JESD_L 4] } # Merge RX and TX into single transceiver for {set i 0} {$i < $common_lanes} {incr i} { set_instance_assignment -name XCVR_RECONFIG_GROUP xcvr_${i} -to rx_data[${i}] set_instance_assignment -name XCVR_RECONFIG_GROUP xcvr_${i} -to tx_data[${i}] } set_instance_assignment -name IO_STANDARD LVDS -to fpga_syncin_0 set_instance_assignment -name IO_STANDARD LVDS -to fpga_syncout_0 set_instance_assignment -name IO_STANDARD LVDS -to sysref2 set_instance_assignment -name INPUT_TERMINATION DIFFERENTIAL -to fpga_syncin_0 set_instance_assignment -name INPUT_TERMINATION DIFFERENTIAL -to sysref2 set_instance_assignment -name IO_STANDARD "1.8 V" -to agc0[0] set_instance_assignment -name IO_STANDARD "1.8 V" -to agc0[1] set_instance_assignment -name IO_STANDARD "1.8 V" -to agc1[0] set_instance_assignment -name IO_STANDARD "1.8 V" -to agc1[1] set_instance_assignment -name IO_STANDARD "1.8 V" -to agc2[0] set_instance_assignment -name IO_STANDARD "1.8 V" -to agc2[1] set_instance_assignment -name IO_STANDARD "1.8 V" -to agc3[0] set_instance_assignment -name IO_STANDARD "1.8 V" -to agc3[1] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[0] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[1] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[2] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[3] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[4] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[5] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[6] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[7] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[8] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[9] set_instance_assignment -name IO_STANDARD "1.8 V" -to gpio[10] set_instance_assignment -name IO_STANDARD "1.8 V" -to hmc_gpio1 set_instance_assignment -name IO_STANDARD "1.8 V" -to hmc_sync set_instance_assignment -name IO_STANDARD "1.8 V" -to irqb[0] set_instance_assignment -name IO_STANDARD "1.8 V" -to irqb[1] set_instance_assignment -name IO_STANDARD "1.8 V" -to rstb set_instance_assignment -name IO_STANDARD "1.8 V" -to rxen[0] set_instance_assignment -name IO_STANDARD "1.8 V" -to rxen[1] set_instance_assignment -name IO_STANDARD "1.8 V" -to spi0_csb set_instance_assignment -name IO_STANDARD "1.8 V" -to spi0_miso set_instance_assignment -name IO_STANDARD "1.8 V" -to spi0_mosi set_instance_assignment -name IO_STANDARD "1.8 V" -to spi0_sclk set_instance_assignment -name IO_STANDARD "1.8 V" -to spi1_csb set_instance_assignment -name IO_STANDARD "1.8 V" -to spi1_sclk set_instance_assignment -name IO_STANDARD "1.8 V" -to spi1_sdio set_instance_assignment -name IO_STANDARD "1.8 V" -to txen[0] set_instance_assignment -name IO_STANDARD "1.8 V" -to txen[1] # set optimization to get a better timing closure set_global_assignment -name OPTIMIZATION_MODE "HIGH PERFORMANCE EFFORT" execute_flow -compile