// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms. 
// The user should keep this in in mind while exploring these cores. 
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
//  (at the option of the user):
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
//   2.  An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
//
// ***************************************************************************
// ***************************************************************************

module util_axis_fifo (
  input m_axis_aclk,
  input m_axis_aresetn,
  input m_axis_ready,
  output m_axis_valid,
  output [DATA_WIDTH-1:0] m_axis_data,
  output [ADDRESS_WIDTH:0] m_axis_level,

  input s_axis_aclk,
  input s_axis_aresetn,
  output s_axis_ready,
  input s_axis_valid,
  input [DATA_WIDTH-1:0] s_axis_data,
  output s_axis_empty,
  output [ADDRESS_WIDTH:0] s_axis_room
);

parameter DATA_WIDTH = 64;
parameter ASYNC_CLK = 1;
parameter ADDRESS_WIDTH = 4;
parameter S_AXIS_REGISTERED = 1;

generate if (ADDRESS_WIDTH == 0) begin

reg [DATA_WIDTH-1:0] cdc_sync_fifo_ram;
reg s_axis_waddr = 1'b0;
reg m_axis_raddr = 1'b0;

wire m_axis_waddr;
wire s_axis_raddr;

sync_bits #(
  .NUM_OF_BITS(1),
  .ASYNC_CLK(ASYNC_CLK)
) i_waddr_sync (
  .out_clk(m_axis_aclk),
  .out_resetn(m_axis_aresetn),
  .in(s_axis_waddr),
  .out(m_axis_waddr)
);

sync_bits #(
  .NUM_OF_BITS(1),
  .ASYNC_CLK(ASYNC_CLK)
) i_raddr_sync (
  .out_clk(s_axis_aclk),
  .out_resetn(s_axis_aresetn),
  .in(m_axis_raddr),
  .out(s_axis_raddr)
);

assign m_axis_valid = m_axis_raddr != m_axis_waddr;
assign m_axis_level = m_axis_valid;
assign s_axis_ready = s_axis_raddr == s_axis_waddr;
assign s_axis_empty = s_axis_ready;
assign s_axis_room = s_axis_ready;

always @(posedge s_axis_aclk) begin
  if (s_axis_ready == 1'b1 && s_axis_valid == 1'b1)
    cdc_sync_fifo_ram <= s_axis_data;
end

always @(posedge s_axis_aclk) begin
  if (s_axis_aresetn == 1'b0) begin
    s_axis_waddr <= 1'b0;
  end else begin
    if (s_axis_ready & s_axis_valid) begin
      s_axis_waddr <= s_axis_waddr + 1'b1;
    end
  end
end

always @(posedge m_axis_aclk) begin
  if (m_axis_aresetn == 1'b0) begin
    m_axis_raddr <= 1'b0;
  end else begin
    if (m_axis_valid & m_axis_ready)
      m_axis_raddr <= m_axis_raddr + 1'b1;
  end
end

assign m_axis_data = cdc_sync_fifo_ram;

end else begin

reg [DATA_WIDTH-1:0] ram[0:2**ADDRESS_WIDTH-1];

wire [ADDRESS_WIDTH-1:0] s_axis_waddr;
wire [ADDRESS_WIDTH-1:0] m_axis_raddr;
wire _m_axis_ready;
wire _m_axis_valid;

if (ASYNC_CLK == 1) begin

fifo_address_gray_pipelined #(
  .ADDRESS_WIDTH(ADDRESS_WIDTH)
) i_address_gray (
  .m_axis_aclk(m_axis_aclk),
  .m_axis_aresetn(m_axis_aresetn),
  .m_axis_ready(_m_axis_ready),
  .m_axis_valid(_m_axis_valid),
  .m_axis_raddr(m_axis_raddr),
  .m_axis_level(m_axis_level),

  .s_axis_aclk(s_axis_aclk),
  .s_axis_aresetn(s_axis_aresetn),
  .s_axis_ready(s_axis_ready),
  .s_axis_valid(s_axis_valid),
  .s_axis_empty(s_axis_empty),
  .s_axis_waddr(s_axis_waddr),
  .s_axis_room(s_axis_room)
);

end else begin

fifo_address_sync #(
  .ADDRESS_WIDTH(ADDRESS_WIDTH)
) i_address_sync (
  .clk(m_axis_aclk),
  .resetn(m_axis_aresetn),
  .m_axis_ready(_m_axis_ready),
  .m_axis_valid(_m_axis_valid),
  .m_axis_raddr(m_axis_raddr),
  .m_axis_level(m_axis_level),

  .s_axis_ready(s_axis_ready),
  .s_axis_valid(s_axis_valid),
  .s_axis_empty(s_axis_empty),
  .s_axis_waddr(s_axis_waddr),
  .s_axis_room(s_axis_room)
);

end

always @(posedge s_axis_aclk) begin
  if (s_axis_ready == 1'b1 && s_axis_valid == 1'b1)
    ram[s_axis_waddr] <= s_axis_data;
end

if (S_AXIS_REGISTERED == 1) begin

reg [DATA_WIDTH-1:0] data;
reg valid;

always @(posedge m_axis_aclk) begin
  if (m_axis_aresetn == 1'b0) begin
    valid <= 1'b0;
  end else begin
    if (_m_axis_valid)
      valid <= 1'b1;
    else if (m_axis_ready)
      valid <= 1'b0;
  end
end

always @(posedge m_axis_aclk) begin
  if ((~valid || m_axis_ready) && _m_axis_valid)
    data <= ram[m_axis_raddr];
end

assign _m_axis_ready = ~valid || m_axis_ready;
assign m_axis_data = data;
assign m_axis_valid = valid;

end else begin

assign _m_axis_ready = m_axis_ready;
assign m_axis_valid = _m_axis_valid;
assign m_axis_data = ram[m_axis_raddr];

end

end endgenerate

endmodule