// *************************************************************************** // *************************************************************************** // Copyright 2011(c) Analog Devices, Inc. // // All rights reserved. // // Redistribution and use in source and binary forms, with or without modification, // are permitted provided that the following conditions are met: // - Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // - Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in // the documentation and/or other materials provided with the // distribution. // - Neither the name of Analog Devices, Inc. nor the names of its // contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // - The use of this software may or may not infringe the patent rights // of one or more patent holders. This license does not release you // from the requirement that you obtain separate licenses from these // patent holders to use this software. // - Use of the software either in source or binary form, must be run // on or directly connected to an Analog Devices Inc. component. // // THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, // INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A // PARTICULAR PURPOSE ARE DISCLAIMED. // // IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, // EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY // RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR // BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, // STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF // THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // *************************************************************************** // *************************************************************************** `timescale 1ns/100ps module system_top ( inout [14:0] ddr_addr, inout [ 2:0] ddr_ba, inout ddr_cas_n, inout ddr_ck_n, inout ddr_ck_p, inout ddr_cke, inout ddr_cs_n, inout [ 3:0] ddr_dm, inout [31:0] ddr_dq, inout [ 3:0] ddr_dqs_n, inout [ 3:0] ddr_dqs_p, inout ddr_odt, inout ddr_ras_n, inout ddr_reset_n, inout ddr_we_n, inout fixed_io_ddr_vrn, inout fixed_io_ddr_vrp, inout [53:0] fixed_io_mio, inout fixed_io_ps_clk, inout fixed_io_ps_porb, inout fixed_io_ps_srstb, inout iic_scl, inout iic_sda, input rx_clk_in_p, input rx_clk_in_n, input rx_frame_in_p, input rx_frame_in_n, input [ 5:0] rx_data_in_p, input [ 5:0] rx_data_in_n, output tx_clk_out_p, output tx_clk_out_n, output tx_frame_out_p, output tx_frame_out_n, output [ 5:0] tx_data_out_p, output [ 5:0] tx_data_out_n, output enable, output txnrx, input clk_out, inout gpio_clksel, inout gpio_resetb, inout gpio_sync, inout gpio_en_agc, inout [ 3:0] gpio_ctl, inout [ 7:0] gpio_status, input usb_fx3_uart_tx, output usb_fx3_uart_rx, input [ 3:0] fifo_rdy, inout [31:0] data, output [1:0] addr, output pclk, output slcs_n, output slrd_n, output sloe_n, output slwr_n, output pktend_n, output [ 1:0] pmode, output spi_csn, output spi_clk, output spi_mosi, input spi_miso); // internal signals wire [63:0] gpio_i; wire [63:0] gpio_o; wire [63:0] gpio_t; // assignments assign pmode = 2'b11; // instantiations ad_iobuf #(.DATA_WIDTH(16)) i_iobuf ( .dio_t ({gpio_t[51], gpio_t[46:32]}), .dio_i ({gpio_o[51], gpio_o[46:32]}), .dio_o ({gpio_i[51], gpio_i[46:32]}), .dio_p ({ gpio_clksel, // 51:51 gpio_resetb, // 46:46 gpio_sync, // 45:45 gpio_en_agc, // 44:44 gpio_ctl, // 43:40 gpio_status})); // 39:32 system_wrapper i_system_wrapper ( .ddr_addr (ddr_addr), .ddr_ba (ddr_ba), .ddr_cas_n (ddr_cas_n), .ddr_ck_n (ddr_ck_n), .ddr_ck_p (ddr_ck_p), .ddr_cke (ddr_cke), .ddr_cs_n (ddr_cs_n), .ddr_dm (ddr_dm), .ddr_dq (ddr_dq), .ddr_dqs_n (ddr_dqs_n), .ddr_dqs_p (ddr_dqs_p), .ddr_odt (ddr_odt), .ddr_ras_n (ddr_ras_n), .ddr_reset_n (ddr_reset_n), .ddr_we_n (ddr_we_n), .enable (enable), .fixed_io_ddr_vrn (fixed_io_ddr_vrn), .fixed_io_ddr_vrp (fixed_io_ddr_vrp), .fixed_io_mio (fixed_io_mio), .fixed_io_ps_clk (fixed_io_ps_clk), .fixed_io_ps_porb (fixed_io_ps_porb), .fixed_io_ps_srstb (fixed_io_ps_srstb), .gpio_i (gpio_i), .gpio_o (gpio_o), .gpio_t (gpio_t), .iic_main_scl_io (iic_scl), .iic_main_sda_io (iic_sda), .otg_vbusoc (1'b0), .ps_intr_00 (1'b0), .ps_intr_01 (1'b0), .ps_intr_02 (1'b0), .ps_intr_03 (1'b0), .ps_intr_04 (1'b0), .ps_intr_05 (1'b0), .ps_intr_06 (1'b0), .ps_intr_07 (1'b0), .ps_intr_08 (1'b0), .ps_intr_09 (1'b0), .ps_intr_15 (1'b0), .rx_clk_in_n (rx_clk_in_n), .rx_clk_in_p (rx_clk_in_p), .rx_data_in_n (rx_data_in_n), .rx_data_in_p (rx_data_in_p), .rx_frame_in_n (rx_frame_in_n), .rx_frame_in_p (rx_frame_in_p), .spi0_clk_i (1'b0), .spi0_clk_o (spi_clk), .spi0_csn_0_o (spi_csn), .spi0_csn_1_o (), .spi0_csn_2_o (), .spi0_csn_i (1'b1), .spi0_sdi_i (spi_miso), .spi0_sdo_i (1'b0), .spi0_sdo_o (spi_mosi), .spi1_clk_i (1'b0), .spi1_clk_o (), .spi1_csn_0_o (), .spi1_csn_1_o (), .spi1_csn_2_o (), .spi1_csn_i (1'b1), .spi1_sdi_i (1'b0), .spi1_sdo_i (1'b0), .spi1_sdo_o (), .tdd_sync_i (1'b0), .tdd_sync_o (), .tdd_sync_t (), .tx_clk_out_n (tx_clk_out_n), .tx_clk_out_p (tx_clk_out_p), .tx_data_out_n (tx_data_out_n), .tx_data_out_p (tx_data_out_p), .tx_frame_out_n (tx_frame_out_n), .tx_frame_out_p (tx_frame_out_p), .txnrx (txnrx), .up_enable (gpio_o[47]), .up_txnrx (gpio_o[48]), .usb_fx3_uart_tx(usb_fx3_uart_tx), .usb_fx3_uart_rx(usb_fx3_uart_rx), .dma_rdy(), .dma_wmk(), .fifo_rdy(fifo_rdy), .pclk(pclk), .data(data), .addr(addr), .slcs_n(slcs_n), .slrd_n(slrd_n), .sloe_n(sloe_n), .slwr_n(slwr_n), // .epswitch_n(epswitch_n), .pktend_n(pktend_n) ); endmodule // *************************************************************************** // ***************************************************************************