// *************************************************************************** // *************************************************************************** // Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved. // // This core is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR // A PARTICULAR PURPOSE. // // Redistribution and use of source or resulting binaries, with or without modification // of this file, are permitted under one of the following two license terms: // // 1. The GNU General Public License version 2 as published by the // Free Software Foundation, which can be found in the top level directory of // the repository (LICENSE_GPL2), and at: // // OR // // 2. An ADI specific BSD license as noted in the top level directory, or on-line at: // https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD // This will allow to generate bit files and not release the source code, // as long as it attaches to an ADI device. // // *************************************************************************** // *************************************************************************** `timescale 1ns/100ps module ad_dds_1 ( // interface input clk, input [15:0] angle, input [15:0] scale, output reg [15:0] dds_data); // internal registers // internal signals wire [15:0] sine_s; wire [33:0] s1_data_s; // sine ad_dds_sine #(.DELAY_DATA_WIDTH(1)) i_dds_sine ( .clk (clk), .angle (angle), .sine (sine_s), .ddata_in (1'b0), .ddata_out ()); // scale ad_mul #(.DELAY_DATA_WIDTH(1)) i_dds_scale ( .clk (clk), .data_a ({sine_s[15], sine_s}), .data_b ({scale[15], scale}), .data_p (s1_data_s), .ddata_in (1'b0), .ddata_out ()); // dds data always @(posedge clk) begin dds_data <= s1_data_s[29:14]; end endmodule // *************************************************************************** // ***************************************************************************