// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// This core  is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory of
//      the repository (LICENSE_GPL2), and at: <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
//   2. An ADI specific BSD license as noted in the top level directory, or on-line at:
//      https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
//      This will allow to generate bit files and not release the source code,
//      as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
// PN monitors

`timescale 1ns/100ps

module ad_pnmon #(

  parameter DATA_WIDTH = 16) (

  // adc interface

  input                   adc_clk,
  input                   adc_valid_in,
  input       [DW:0]      adc_data_in,
  input       [DW:0]      adc_data_pn,

  // pn out of sync and error

  output  reg             adc_pn_oos,
  output  reg             adc_pn_err);

  localparam DW = DATA_WIDTH - 1;

  // internal registers

  reg             adc_valid_d = 'd0;
  reg             adc_pn_match_d = 'd0;
  reg             adc_pn_match_z = 'd0;
  reg     [ 3:0]  adc_pn_oos_count = 'd0;

  // internal signals

  wire            adc_pn_match_d_s;
  wire            adc_pn_match_z_s;
  wire            adc_pn_match_s;
  wire            adc_pn_update_s;
  wire            adc_pn_err_s;

  // make sure data is not 0, sequence will fail.

  assign adc_pn_match_d_s = (adc_data_in == adc_data_pn) ? 1'b1 : 1'b0;
  assign adc_pn_match_z_s = (adc_data_in == 'd0) ? 1'b0 : 1'b1;
  assign adc_pn_match_s = adc_pn_match_d & adc_pn_match_z;
  assign adc_pn_update_s = ~(adc_pn_oos ^ adc_pn_match_s);
  assign adc_pn_err_s = ~(adc_pn_oos | adc_pn_match_s);

  // pn oos and counters (16 to clear and set).

  always @(posedge adc_clk) begin
    adc_valid_d <= adc_valid_in;
    adc_pn_match_d <= adc_pn_match_d_s;
    adc_pn_match_z <= adc_pn_match_z_s;
    if (adc_valid_d == 1'b1) begin
      adc_pn_err <= adc_pn_err_s;
      if ((adc_pn_update_s == 1'b1) && (adc_pn_oos_count >= 15)) begin
        adc_pn_oos <= ~adc_pn_oos;
      end
      if (adc_pn_update_s == 1'b1) begin
        adc_pn_oos_count <= adc_pn_oos_count + 1'b1;
      end else begin
        adc_pn_oos_count <= 'd0;
      end
    end
  end

endmodule

// ***************************************************************************
// ***************************************************************************