// *************************************************************************** // *************************************************************************** // Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved. // // This core is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR // A PARTICULAR PURPOSE. // // Redistribution and use of source or resulting binaries, with or without modification // of this file, are permitted under one of the following two license terms: // // 1. The GNU General Public License version 2 as published by the // Free Software Foundation, which can be found in the top level directory of // the repository (LICENSE_GPL2), and at: // // OR // // 2. An ADI specific BSD license as noted in the top level directory, or on-line at: // https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD // This will allow to generate bit files and not release the source code, // as long as it attaches to an ADI device. // // *************************************************************************** // *************************************************************************** module cic_int #( parameter DATA_WIDTH = 12, parameter STAGE_WIDTH = 1, parameter NUM_STAGES = 1 ) ( input clk, input [NUM_STAGES-1:0] ce, input [DATA_WIDTH-1:0] data_in, output [DATA_WIDTH-1:0] data_out ); reg [DATA_WIDTH-1:0] state = 'h00; wire [DATA_WIDTH-1:0] sum; wire [DATA_WIDTH-1:0] mask; assign data_out = state; assign sum = (data_in & mask) + (state & mask); generate genvar i; for (i = 0; i < NUM_STAGES; i = i + 1) begin localparam j = NUM_STAGES - i - 1; localparam H = DATA_WIDTH - STAGE_WIDTH * i - 1; localparam L = j == 0 ? 0 : DATA_WIDTH - STAGE_WIDTH * (i+1); assign mask[H:L] = {{H-L{1'b1}},j != 0 ? ce[j] : 1'b1}; always @(posedge clk) begin if (ce[j] == 1'b1) begin state[H:L] <= sum[H:L]; end end end endgenerate endmodule