create_bd_port -dir I usb_fx3_uart_tx
create_bd_port -dir O usb_fx3_uart_rx

create_bd_port -dir I dma_rdy
create_bd_port -dir I dma_wmk
create_bd_port -dir I -from 10 -to 0 fifo_rdy
create_bd_port -dir O pclk
create_bd_port -dir O -from 31 -to 0 data
create_bd_port -dir O -from 4 -to 0 addr
create_bd_port -dir O slcs_n
create_bd_port -dir O slrd_n
create_bd_port -dir O sloe_n
create_bd_port -dir O slwr_n
create_bd_port -dir O pktend_n
create_bd_port -dir O epswitch_n

set_property -dict [list CONFIG.PCW_UART0_PERIPHERAL_ENABLE {1}] $sys_ps7

set axi_usb_fx3 [create_bd_cell -type ip -vlnv analog.com:user:axi_usb_fx3:1.0 axi_usb_fx3]

set axi_usb_fx3_dma [create_bd_cell -type ip -vlnv xilinx.com:ip:axi_dma:7.1 axi_usb_fx3_dma]
set_property -dict [list CONFIG.c_sg_include_stscntrl_strm {0}] $axi_usb_fx3_dma

ad_connect axi_usb_fx3_dma/S_AXIS_S2MM axi_usb_fx3/m_axis
ad_connect axi_usb_fx3/s_axis axi_usb_fx3_dma/M_AXIS_MM2S

ad_connect /sys_ps7/UART0_RX usb_fx3_uart_tx
ad_connect /sys_ps7/UART0_TX usb_fx3_uart_rx

ad_connect sys_cpu_clk axi_usb_fx3/s_axi_aclk
ad_connect sys_cpu_resetn axi_usb_fx3/s_axi_aresetn

ad_connect axi_usb_fx3/dma_rdy dma_rdy
ad_connect axi_usb_fx3/dma_wmk dma_wmk
ad_connect axi_usb_fx3/fifo_rdy fifo_rdy
ad_connect axi_usb_fx3/pclk pclk
ad_connect axi_usb_fx3/data data
ad_connect axi_usb_fx3/addr addr
ad_connect axi_usb_fx3/slcs_n slcs_n
ad_connect axi_usb_fx3/slrd_n slrd_n
ad_connect axi_usb_fx3/sloe_n sloe_n
ad_connect axi_usb_fx3/slwr_n slwr_n
ad_connect axi_usb_fx3/pktend_n pktend_n
ad_connect axi_usb_fx3/epswitch_n epswitch_n

ad_cpu_interrupt ps-13 mb-12 axi_usb_fx3/irq
ad_cpu_interrupt ps-12 mb-13 axi_usb_fx3_dma/mm2s_introut
ad_cpu_interrupt ps-11 mb-14 axi_usb_fx3_dma/s2mm_introut

ad_cpu_interconnect 0x50000000 axi_usb_fx3
ad_cpu_interconnect 0x40400000 axi_usb_fx3_dma
ad_mem_hp1_interconnect sys_cpu_clk sys_ps7/S_AXI_HP1
ad_mem_hp1_interconnect sys_cpu_clk axi_usb_fx3_dma/M_AXI_SG
ad_mem_hp1_interconnect sys_cpu_clk axi_usb_fx3_dma/M_AXI_MM2S
ad_mem_hp1_interconnect sys_cpu_clk axi_usb_fx3_dma/M_AXI_S2MM

# test

set vcc [create_bd_cell -type ip -vlnv xilinx.com:ip:xlconstant:1.1 vcc]
#ad_connect vcc/dout axi_usb_fx3/m_axis_tready

set ila [create_bd_cell -type ip -vlnv xilinx.com:ip:ila:6.0 ila]
set_property -dict [list CONFIG.C_MONITOR_TYPE {Native}] $ila
set_property -dict [list CONFIG.C_NUM_OF_PROBES {3}] $ila
set_property -dict [list CONFIG.C_PROBE2_WIDTH {15}] $ila
set_property -dict [list CONFIG.C_PROBE1_WIDTH {74}] $ila
set_property -dict [list CONFIG.C_PROBE0_WIDTH {75}] $ila
set_property -dict [list CONFIG.C_DATA_DEPTH {32768}] $ila
set_property -dict [list CONFIG.C_EN_STRG_QUAL {1}] $ila
set_property -dict [list CONFIG.C_PROBE2_MU_CNT {2}] $ila
set_property -dict [list CONFIG.C_PROBE1_MU_CNT {2}] $ila
set_property -dict [list CONFIG.C_PROBE0_MU_CNT {2}] $ila
set_property -dict [list CONFIG.ALL_PROBE_SAME_MU_CNT {2}] $ila
set_property -dict [list CONFIG.C_ENABLE_ILA_AXI_MON {false}] $ila

ad_connect ila/clk axi_usb_fx3/pclk
ad_connect ila/probe0 axi_usb_fx3/debug_fx32dma
ad_connect ila/probe1 axi_usb_fx3/debug_dma2fx3
ad_connect ila/probe2 axi_usb_fx3/debug_status