// *************************************************************************** // *************************************************************************** // Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved. // // This core is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR // A PARTICULAR PURPOSE. // // Redistribution and use of source or resulting binaries, with or without modification // of this file, are permitted under one of the following two license terms: // // 1. The GNU General Public License version 2 as published by the // Free Software Foundation, which can be found in the top level directory of // the repository (LICENSE_GPL2), and at: // // OR // // 2. An ADI specific BSD license as noted in the top level directory, or on-line at: // https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD // This will allow to generate bit files and not release the source code, // as long as it attaches to an ADI device. // // *************************************************************************** // *************************************************************************** `timescale 1ns/100ps module ad_cmos_clk #( parameter DEVICE_TYPE = 0) ( input rst, output locked, input clk_in, output clk); // instantiations generate if (DEVICE_TYPE == 0) begin alt_clk i_clk ( .rst (rst), .refclk (clk_in), .outclk_0 (clk), .locked (locked)); end endgenerate generate if (DEVICE_TYPE == 1) begin altera_pll #( .reference_clock_frequency("250.0 MHz"), .operation_mode("source synchronous"), .number_of_clocks(1), .output_clock_frequency0("0 MHz"), .phase_shift0("0")) i_clk ( .rst (rst), .refclk (clk_in), .outclk (clk), .fboutclk (), .fbclk (1'b0), .locked (locked)); end endgenerate endmodule // *************************************************************************** // ***************************************************************************