// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// This core  is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory of
//      the repository (LICENSE_GPL2), and at: <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
//   2. An ADI specific BSD license as noted in the top level directory, or on-line at:
//      https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
//      This will allow to generate bit files and not release the source code,
//      as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module system_top (

  input   [12:0]  gpio_bd_i,
  output  [ 7:0]  gpio_bd_o,

  input           rx_clk_in_p,
  input           rx_clk_in_n,
  input           rx_frame_in_p,
  input           rx_frame_in_n,
  input   [ 5:0]  rx_data_in_p,
  input   [ 5:0]  rx_data_in_n,
  output          tx_clk_out_p,
  output          tx_clk_out_n,
  output          tx_frame_out_p,
  output          tx_frame_out_n,
  output  [ 5:0]  tx_data_out_p,
  output  [ 5:0]  tx_data_out_n,

  output          enable,
  output          txnrx,

  output          gpio_resetb,
  output          gpio_sync,
  output          gpio_en_agc,
  output  [ 3:0]  gpio_ctl,
  input   [ 7:0]  gpio_status,

  output          spi_csn,
  output          spi_clk,
  output          spi_mosi,
  input           spi_miso);

  // internal signals

  wire    [95:0]  gpio_i;
  wire    [95:0]  gpio_o;
  wire    [ 2:0]  spi0_csn;

  // defaults

  assign gpio_resetb = gpio_o[46:46];
  assign gpio_sync = gpio_o[45:45];
  assign gpio_en_agc = gpio_o[44:44];
  assign gpio_ctl = gpio_o[43:40];
  assign gpio_bd_o = gpio_o[20:13];

  assign gpio_i[95:40] = gpio_o[95:40];
  assign gpio_i[39:32] = gpio_status;
  assign gpio_i[31:13] = gpio_o[31:13];
  assign gpio_i[12: 0] = gpio_bd_i;

  assign spi_csn = spi0_csn[0];

  // instantiations

  system_wrapper i_system_wrapper (
    .enable (enable),
    .gpio_i (gpio_i),
    .gpio_o (gpio_o),
    .ps_intr_00 (1'b0),
    .ps_intr_01 (1'b0),
    .ps_intr_02 (1'b0),
    .ps_intr_03 (1'b0),
    .ps_intr_04 (1'b0),
    .ps_intr_05 (1'b0),
    .ps_intr_06 (1'b0),
    .ps_intr_07 (1'b0),
    .ps_intr_08 (1'b0),
    .ps_intr_09 (1'b0),
    .ps_intr_10 (1'b0),
    .ps_intr_11 (1'b0),
    .ps_intr_14 (1'b0),
    .ps_intr_15 (1'b0),
    .rx_clk_in_n (rx_clk_in_n),
    .rx_clk_in_p (rx_clk_in_p),
    .rx_data_in_n (rx_data_in_n),
    .rx_data_in_p (rx_data_in_p),
    .rx_frame_in_n (rx_frame_in_n),
    .rx_frame_in_p (rx_frame_in_p),
    .spi0_csn (spi0_csn),
    .spi0_miso (spi_miso),
    .spi0_mosi (spi_mosi),
    .spi0_sclk (spi_clk),
    .spi1_csn (),
    .spi1_miso (1'b0),
    .spi1_mosi (),
    .spi1_sclk (),
    .tdd_sync_i (1'b0),
    .tdd_sync_o (),
    .tdd_sync_t (),
    .tx_clk_out_n (tx_clk_out_n),
    .tx_clk_out_p (tx_clk_out_p),
    .tx_data_out_n (tx_data_out_n),
    .tx_data_out_p (tx_data_out_p),
    .tx_frame_out_n (tx_frame_out_n),
    .tx_frame_out_p (tx_frame_out_p),
    .txnrx (txnrx),
    .up_enable (gpio_o[47]),
    .up_txnrx (gpio_o[48]));

endmodule

// ***************************************************************************
// ***************************************************************************