// *************************************************************************** // *************************************************************************** // Copyright (C) 2022-2023 Analog Devices, Inc. All rights reserved. // // In this HDL repository, there are many different and unique modules, consisting // of various HDL (Verilog or VHDL) components. The individual modules are // developed independently, and may be accompanied by separate and unique license // terms. // // The user should read each of these license terms, and understand the // freedoms and responsibilities that he or she has by using this source/core. // // This core is distributed in the hope that it will be useful, but WITHOUT ANY // WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR // A PARTICULAR PURPOSE. // // Redistribution and use of source or resulting binaries, with or without modification // of this file, are permitted under one of the following two license terms: // // 1. The GNU General Public License version 2 as published by the // Free Software Foundation, which can be found in the top level directory // of this repository (LICENSE_GPL2), and also online at: // // // OR // // 2. An ADI specific BSD license, which can be found in the top level directory // of this repository (LICENSE_ADIBSD), and also on-line at: // https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD // This will allow to generate bit files and not release the source code, // as long as it attaches to an ADI device. // // *************************************************************************** // *************************************************************************** `timescale 1ns/100ps module system_top #( parameter NUM_LINKS = 2, parameter DEVICE_CODE = 0 ) ( input sys_rst, input sys_clk_p, input sys_clk_n, input uart_sin, output uart_sout, output ddr4_act_n, output [16:0] ddr4_addr, output [ 1:0] ddr4_ba, output [ 0:0] ddr4_bg, output ddr4_ck_p, output ddr4_ck_n, output [ 0:0] ddr4_cke, output [ 0:0] ddr4_cs_n, inout [ 7:0] ddr4_dm_n, inout [63:0] ddr4_dq, inout [ 7:0] ddr4_dqs_p, inout [ 7:0] ddr4_dqs_n, output [ 0:0] ddr4_odt, output ddr4_reset_n, output mdio_mdc, inout mdio_mdio, input phy_clk_p, input phy_clk_n, output phy_rst_n, input phy_rx_p, input phy_rx_n, output phy_tx_p, output phy_tx_n, inout [16:0] gpio_bd, output iic_rstn, inout iic_scl, inout iic_sda, input tx_ref_clk_121_p, input tx_ref_clk_121_n, input tx_ref_clk_126_p, input tx_ref_clk_126_n, input tx_sysref_p, input tx_sysref_n, input [ 1:0] tx_sync_p, input [ 1:0] tx_sync_n, output [ 7:0] tx_data_p, output [ 7:0] tx_data_n, output spi_csn_dac, output spi_csn_clk, output spi_csn_clk2, input spi_miso, output spi_mosi, output spi_clk, output spi_en, inout [ 4:0] dac_ctrl ); // internal signals wire [63:0] gpio_i; wire [63:0] gpio_o; wire [63:0] gpio_t; wire [ 2:0] spi_csn; wire tx_ref_clk; wire tx_sysref; wire [ 1:0] tx_sync; wire tx_sysref_loc; assign iic_rstn = 1'b1; // spi // spi_en is active ... // ... high for AD9135-FMC-EBZ, AD9136-FMC-EBZ, AD9144-FMC-EBZ, // ... low for AD9171-FMC-EBZ, AD9172-FMC-EBZ, AD9173-FMC-EBZ // If you are planning to build a bitstream for just one of those boards you // can hardwire the logic level here. // assign spi_en = (DEVICE_CODE <= 2); // 9135/9144/9172 916(1,2,3,4) assign spi_csn_dac = spi_csn[1]; assign spi_csn_clk = spi_csn[0]; // HMC7044 AD9508 assign spi_csn_clk2 = spi_csn[2]; // NC ADF4355 /* JESD204 clocks and control signals */ IBUFDS_GTE4 i_ibufds_tx_ref_clk_121 ( .CEB (1'd0), .I (tx_ref_clk_121_p), .IB (tx_ref_clk_121_n), .O (tx_ref_clk_121), .ODIV2 ()); IBUFDS_GTE4 i_ibufds_tx_ref_clk_126 ( .CEB (1'd0), .I (tx_ref_clk_126_p), .IB (tx_ref_clk_126_n), .O (tx_ref_clk_126), .ODIV2 ()); IBUFDS i_ibufds_tx_sysref ( .I (tx_sysref_p), .IB (tx_sysref_n), .O (tx_sysref)); IBUFDS i_ibufds_tx_sync_0 ( .I (tx_sync_p[0]), .IB (tx_sync_n[0]), .O (tx_sync[0])); IBUFDS i_ibufds_tx_sync_1 ( .I (tx_sync_p[1]), .IB (tx_sync_n[1]), .O (tx_sync[1])); /* FMC GPIOs */ ad_iobuf #( .DATA_WIDTH(5) ) i_iobuf ( .dio_t (gpio_t[21+:5]), .dio_i (gpio_o[21+:5]), .dio_o (gpio_i[21+:5]), .dio_p ({ dac_ctrl /* 25 - 21 */ })); /* * Control signals for different FMC boards: * * dac_ctrl FMC 9144 like 9162 like 9172 like * 0 H13 FMC_TXEN_0 FMC_TXEN_0 FMC_PE_CTRL * 1 C10 NC NC FMC_TXEN_0 * 2 C11 NC NC FMC_TXEN_1 * 3 H14 FMC_TXEN_1 NC NC * 4 D15 NC FMC_HMC849VCTL NC */ assign dac_fifo_bypass = gpio_o[40]; /* Board GPIOS. Buttons, LEDs, etc... */ ad_iobuf #( .DATA_WIDTH(17) ) i_iobuf_bd ( .dio_t (gpio_t[0+:17]), .dio_i (gpio_o[0+:17]), .dio_o (gpio_i[0+:17]), .dio_p (gpio_bd)); assign gpio_i[63:26] = gpio_o[63:26]; assign gpio_i[20:17] = gpio_o[20:17]; system_wrapper i_system_wrapper ( .ddr4_act_n (ddr4_act_n), .ddr4_adr (ddr4_addr), .ddr4_ba (ddr4_ba), .ddr4_bg (ddr4_bg), .ddr4_ck_c (ddr4_ck_n), .ddr4_ck_t (ddr4_ck_p), .ddr4_cke (ddr4_cke), .ddr4_cs_n (ddr4_cs_n), .ddr4_dm_n (ddr4_dm_n), .ddr4_dq (ddr4_dq), .ddr4_dqs_c (ddr4_dqs_n), .ddr4_dqs_t (ddr4_dqs_p), .ddr4_odt (ddr4_odt), .ddr4_reset_n (ddr4_reset_n), .gpio0_i (gpio_i[31:0]), .gpio0_o (gpio_o[31:0]), .gpio0_t (gpio_t[31:0]), .gpio1_i (gpio_i[63:32]), .gpio1_o (gpio_o[63:32]), .gpio1_t (gpio_t[63:32]), .iic_main_scl_io (iic_scl), .iic_main_sda_io (iic_sda), .mdio_mdc (mdio_mdc), .mdio_mdio_io (mdio_mdio), .sgmii_phyclk_clk_n (phy_clk_n), .sgmii_phyclk_clk_p (phy_clk_p), .phy_rst_n (phy_rst_n), .phy_sd (1'b1), .sgmii_rxn (phy_rx_n), .sgmii_rxp (phy_rx_p), .sgmii_txn (phy_tx_n), .sgmii_txp (phy_tx_p), .spi_clk_i (spi_clk), .spi_clk_o (spi_clk), .spi_csn_i (spi_csn), .spi_csn_o (spi_csn), .spi_sdi_i (spi_miso), .spi_sdo_i (spi_mosi), .spi_sdo_o (spi_mosi), .sys_clk_clk_n (sys_clk_n), .sys_clk_clk_p (sys_clk_p), .sys_rst (sys_rst), .tx_data_0_n (tx_data_n[0]), .tx_data_0_p (tx_data_p[0]), .tx_data_1_n (tx_data_n[1]), .tx_data_1_p (tx_data_p[1]), .tx_data_2_n (tx_data_n[2]), .tx_data_2_p (tx_data_p[2]), .tx_data_3_n (tx_data_n[3]), .tx_data_3_p (tx_data_p[3]), .tx_data_4_n (tx_data_n[4]), .tx_data_4_p (tx_data_p[4]), .tx_data_5_n (tx_data_n[5]), .tx_data_5_p (tx_data_p[5]), .tx_data_6_n (tx_data_n[6]), .tx_data_6_p (tx_data_p[6]), .tx_data_7_n (tx_data_n[7]), .tx_data_7_p (tx_data_p[7]), .tx_ref_clk_0 (tx_ref_clk_126), .tx_ref_clk_4 (tx_ref_clk_121), .tx_sync_0 (tx_sync), .tx_sysref_0 (tx_sysref), .uart_sin (uart_sin), .uart_sout (uart_sout), .dac_fifo_bypass (dac_fifo_bypass)); // AD9161/2/4-FMC-EBZ works only in single link, // The FMC connector instead of SYNC1 has SYSREF connected to it assign tx_sysref_loc = (DEVICE_CODE == 3) ? tx_sync[1] : tx_sysref; endmodule