448 lines
12 KiB
VHDL
448 lines
12 KiB
VHDL
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
|
|
library ieee;
|
|
use ieee.std_logic_1164.all;
|
|
use ieee.numeric_std.all;
|
|
use ieee.math_real.all;
|
|
|
|
library work;
|
|
use work.i2s_controller;
|
|
|
|
library work;
|
|
use work.axi_streaming_dma_rx_fifo;
|
|
use work.axi_streaming_dma_tx_fifo;
|
|
use work.pl330_dma_fifo;
|
|
use work.axi_ctrlif;
|
|
|
|
entity axi_i2s_adi is
|
|
generic
|
|
(
|
|
-- ADD USER GENERICS BELOW THIS LINE ---------------
|
|
SLOT_WIDTH : integer := 24;
|
|
LRCLK_POL : integer := 0; -- LRCLK Polarity (0 - Falling edge, 1 - Rising edge)
|
|
BCLK_POL : integer := 0; -- BCLK Polarity (0 - Falling edge, 1 - Rising edge)
|
|
-- ADD USER GENERICS ABOVE THIS LINE ---------------
|
|
|
|
-- DO NOT EDIT BELOW THIS LINE ---------------------
|
|
-- Bus protocol parameters, do not add to or delete
|
|
S_AXI_DATA_WIDTH : integer := 32;
|
|
S_AXI_ADDRESS_WIDTH : integer := 32;
|
|
DEVICE_FAMILY : string := "virtex6";
|
|
-- DO NOT EDIT ABOVE THIS LINE ---------------------
|
|
DMA_TYPE : integer := 0;
|
|
NUM_OF_CHANNEL : integer := 1;
|
|
HAS_TX : integer := 1;
|
|
HAS_RX : integer := 1
|
|
);
|
|
port
|
|
(
|
|
-- Serial Data interface
|
|
data_clk_i : in std_logic;
|
|
bclk_o : out std_logic_vector(NUM_OF_CHANNEL - 1 downto 0);
|
|
lrclk_o : out std_logic_vector(NUM_OF_CHANNEL - 1 downto 0);
|
|
sdata_o : out std_logic_vector(NUM_OF_CHANNEL - 1 downto 0);
|
|
sdata_i : in std_logic_vector(NUM_OF_CHANNEL - 1 downto 0);
|
|
|
|
-- AXI Streaming DMA TX interface
|
|
s_axis_aclk : in std_logic;
|
|
s_axis_aresetn : in std_logic;
|
|
s_axis_tready : out std_logic;
|
|
s_axis_tdata : in std_logic_vector(31 downto 0);
|
|
s_axis_tlast : in std_logic;
|
|
s_axis_tvalid : in std_logic;
|
|
|
|
-- AXI Streaming DMA RX interface
|
|
m_axis_aclk : in std_logic;
|
|
m_axis_tready : in std_logic;
|
|
m_axis_tdata : out std_logic_vector(31 downto 0);
|
|
m_axis_tlast : out std_logic;
|
|
m_axis_tvalid : out std_logic;
|
|
m_axis_tkeep : out std_logic_vector(3 downto 0);
|
|
|
|
--PL330 DMA TX interface
|
|
dma_req_tx_aclk : in std_logic;
|
|
dma_req_tx_rstn : in std_logic;
|
|
dma_req_tx_davalid : in std_logic;
|
|
dma_req_tx_datype : in std_logic_vector(1 downto 0);
|
|
dma_req_tx_daready : out std_logic;
|
|
dma_req_tx_drvalid : out std_logic;
|
|
dma_req_tx_drtype : out std_logic_vector(1 downto 0);
|
|
dma_req_tx_drlast : out std_logic;
|
|
dma_req_tx_drready : in std_logic;
|
|
|
|
-- PL330 DMA RX interface
|
|
dma_req_rx_aclk : in std_logic;
|
|
dma_req_rx_rstn : in std_logic;
|
|
dma_req_rx_davalid : in std_logic;
|
|
dma_req_rx_datype : in std_logic_vector(1 downto 0);
|
|
dma_req_rx_daready : out std_logic;
|
|
dma_req_rx_drvalid : out std_logic;
|
|
dma_req_rx_drtype : out std_logic_vector(1 downto 0);
|
|
dma_req_rx_drlast : out std_logic;
|
|
dma_req_rx_drready : in std_logic;
|
|
|
|
-- AXI bus interface
|
|
s_axi_aclk : in std_logic;
|
|
s_axi_aresetn : in std_logic;
|
|
s_axi_awaddr : in std_logic_vector(S_AXI_ADDRESS_WIDTH-1 downto 0);
|
|
s_axi_awvalid : in std_logic;
|
|
s_axi_wdata : in std_logic_vector(S_AXI_DATA_WIDTH-1 downto 0);
|
|
s_axi_wstrb : in std_logic_vector((S_AXI_DATA_WIDTH/8)-1 downto 0);
|
|
s_axi_wvalid : in std_logic;
|
|
s_axi_bready : in std_logic;
|
|
s_axi_araddr : in std_logic_vector(S_AXI_ADDRESS_WIDTH-1 downto 0);
|
|
s_axi_arvalid : in std_logic;
|
|
s_axi_rready : in std_logic;
|
|
s_axi_arready : out std_logic;
|
|
s_axi_rdata : out std_logic_vector(S_AXI_DATA_WIDTH-1 downto 0);
|
|
s_axi_rresp : out std_logic_vector(1 downto 0);
|
|
s_axi_rvalid : out std_logic;
|
|
s_axi_wready : out std_logic;
|
|
s_axi_bresp : out std_logic_vector(1 downto 0);
|
|
s_axi_bvalid : out std_logic;
|
|
s_axi_awready : out std_logic;
|
|
s_axi_awprot : in std_logic_vector(2 downto 0);
|
|
s_axi_arprot : in std_logic_vector(2 downto 0)
|
|
|
|
);
|
|
end entity axi_i2s_adi;
|
|
|
|
architecture Behavioral of axi_i2s_adi is
|
|
|
|
------------------------------------------
|
|
-- Signals for user logic slave model s/w accessible register example
|
|
------------------------------------------
|
|
signal i2s_reset : std_logic;
|
|
signal tx_fifo_reset : std_logic;
|
|
signal tx_enable : Boolean;
|
|
signal tx_data : std_logic_vector(SLOT_WIDTH - 1 downto 0);
|
|
signal tx_ack : std_logic;
|
|
signal tx_stb : std_logic;
|
|
|
|
signal rx_enable : Boolean;
|
|
signal rx_fifo_reset : std_logic;
|
|
signal rx_data : std_logic_vector(SLOT_WIDTH - 1 downto 0);
|
|
signal rx_ack : std_logic;
|
|
signal rx_stb : std_logic;
|
|
|
|
signal const_1 : std_logic;
|
|
|
|
signal bclk_div_rate : natural range 0 to 255;
|
|
signal lrclk_div_rate : natural range 0 to 255;
|
|
|
|
signal period_len : integer range 0 to 65535;
|
|
|
|
signal I2S_RESET_REG : std_logic_vector(31 downto 0);
|
|
signal I2S_CONTROL_REG : std_logic_vector(31 downto 0);
|
|
signal I2S_CLK_CONTROL_REG : std_logic_vector(31 downto 0);
|
|
signal PERIOD_LEN_REG : std_logic_vector(31 downto 0);
|
|
|
|
constant FIFO_AWIDTH : integer := integer(ceil(log2(real(NUM_OF_CHANNEL * 8))));
|
|
|
|
-- Audio samples FIFO
|
|
constant RAM_ADDR_WIDTH : integer := 7;
|
|
type RAM_TYPE is array (0 to (2**RAM_ADDR_WIDTH - 1)) of std_logic_vector(31 downto 0);
|
|
|
|
-- RX FIFO signals
|
|
signal audio_fifo_rx : RAM_TYPE;
|
|
signal audio_fifo_rx_wr_addr : integer range 0 to 2**RAM_ADDR_WIDTH-1;
|
|
signal audio_fifo_rx_rd_addr : integer range 0 to 2**RAM_ADDR_WIDTH-1;
|
|
signal tvalid : std_logic := '0';
|
|
signal rx_tlast : std_logic;
|
|
signal drain_tx_dma : std_logic;
|
|
|
|
signal rx_sample : std_logic_vector(23 downto 0);
|
|
|
|
signal wr_data : std_logic_vector(31 downto 0);
|
|
signal rd_data : std_logic_vector(31 downto 0);
|
|
signal wr_addr : integer range 0 to 11;
|
|
signal rd_addr : integer range 0 to 11;
|
|
signal wr_stb : std_logic;
|
|
signal rd_ack : std_logic;
|
|
signal tx_fifo_stb : std_logic;
|
|
signal rx_fifo_ack : std_logic;
|
|
signal cnt : integer range 0 to 2**16-1;
|
|
begin
|
|
|
|
const_1 <= '1';
|
|
|
|
process (s_axi_aclk)
|
|
begin
|
|
if rising_edge(s_axi_aclk) then
|
|
if s_axi_aresetn = '0' then
|
|
cnt <= 0;
|
|
else
|
|
cnt <= (cnt + 1) mod 2**16;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
streaming_dma_tx_gen: if DMA_TYPE = 0 and HAS_TX = 1 generate
|
|
tx_fifo : entity axi_streaming_dma_tx_fifo
|
|
generic map(
|
|
RAM_ADDR_WIDTH => FIFO_AWIDTH,
|
|
FIFO_DWIDTH => 24
|
|
)
|
|
port map(
|
|
clk => s_axi_aclk,
|
|
resetn => s_axi_aresetn,
|
|
fifo_reset => tx_fifo_reset,
|
|
enable => tx_enable,
|
|
|
|
s_axis_aclk => s_axis_aclk,
|
|
s_axis_tready => s_axis_tready,
|
|
s_axis_tdata => s_axis_tdata(31 downto 8),
|
|
s_axis_tlast => s_axis_tlast,
|
|
s_axis_tvalid => s_axis_tvalid,
|
|
|
|
out_stb => tx_stb,
|
|
out_ack => tx_ack,
|
|
out_data => tx_data
|
|
);
|
|
end generate;
|
|
|
|
no_streaming_dma_tx_gen: if DMA_TYPE /= 0 or HAS_TX /= 1 generate
|
|
s_axis_tready <= '0';
|
|
end generate;
|
|
|
|
streaming_dma_rx_gen: if DMA_TYPE = 0 and HAS_RX = 1 generate
|
|
rx_fifo : entity axi_streaming_dma_rx_fifo
|
|
generic map(
|
|
RAM_ADDR_WIDTH => FIFO_AWIDTH,
|
|
FIFO_DWIDTH => 24
|
|
)
|
|
port map(
|
|
clk => s_axi_aclk,
|
|
resetn => s_axi_aresetn,
|
|
fifo_reset => tx_fifo_reset,
|
|
enable => tx_enable,
|
|
|
|
period_len => period_len,
|
|
|
|
in_stb => rx_stb,
|
|
in_ack => rx_ack,
|
|
in_data => rx_data,
|
|
|
|
m_axis_aclk => m_axis_aclk,
|
|
m_axis_tready => m_axis_tready,
|
|
m_axis_tdata => m_axis_tdata(31 downto 8),
|
|
m_axis_tlast => m_axis_tlast,
|
|
m_axis_tvalid => m_axis_tvalid,
|
|
m_axis_tkeep => m_axis_tkeep
|
|
);
|
|
|
|
m_axis_tdata(7 downto 0) <= (others => '0');
|
|
end generate;
|
|
|
|
no_streaming_dma_rx_gen: if DMA_TYPE /= 0 or HAS_RX /= 1 generate
|
|
m_axis_tdata <= (others => '0');
|
|
m_axis_tlast <= '0';
|
|
m_axis_tvalid <= '0';
|
|
m_axis_tkeep <= (others => '0');
|
|
end generate;
|
|
|
|
|
|
|
|
pl330_dma_tx_gen: if DMA_TYPE = 1 and HAS_TX = 1 generate
|
|
tx_fifo_stb <= '1' when wr_addr = 11 and wr_stb = '1' else '0';
|
|
|
|
tx_fifo: entity pl330_dma_fifo
|
|
generic map(
|
|
RAM_ADDR_WIDTH => FIFO_AWIDTH,
|
|
FIFO_DWIDTH => 24,
|
|
FIFO_DIRECTION => 0
|
|
)
|
|
port map (
|
|
clk => s_axi_aclk,
|
|
resetn => s_axi_aresetn,
|
|
fifo_reset => tx_fifo_reset,
|
|
enable => tx_enable,
|
|
|
|
in_data => wr_data(31 downto 8),
|
|
in_stb => tx_fifo_stb,
|
|
|
|
out_ack => tx_ack,
|
|
out_stb => tx_stb,
|
|
out_data => tx_data,
|
|
|
|
dclk => dma_req_tx_aclk,
|
|
dresetn => dma_req_tx_rstn,
|
|
davalid => dma_req_tx_davalid,
|
|
daready => dma_req_tx_daready,
|
|
datype => dma_req_tx_datype,
|
|
drvalid => dma_req_tx_drvalid,
|
|
drready => dma_req_tx_drready,
|
|
drtype => dma_req_tx_drtype,
|
|
drlast => dma_req_tx_drlast
|
|
);
|
|
end generate;
|
|
|
|
no_pl330_dma_tx_gen: if DMA_TYPE /= 1 or HAS_TX /= 1 generate
|
|
dma_req_tx_daready <= '0';
|
|
dma_req_tx_drvalid <= '0';
|
|
dma_req_tx_drtype <= (others => '0');
|
|
dma_req_tx_drlast <= '0';
|
|
end generate;
|
|
|
|
pl330_dma_rx_gen: if DMA_TYPE = 1 and HAS_RX = 1 generate
|
|
rx_fifo_ack <= '1' when rd_addr = 10 and rd_ack = '1' else '0';
|
|
|
|
rx_fifo: entity pl330_dma_fifo
|
|
generic map(
|
|
RAM_ADDR_WIDTH => FIFO_AWIDTH,
|
|
FIFO_DWIDTH => 24,
|
|
FIFO_DIRECTION => 1
|
|
)
|
|
port map (
|
|
clk => s_axi_aclk,
|
|
resetn => s_axi_aresetn,
|
|
fifo_reset => rx_fifo_reset,
|
|
enable => rx_enable,
|
|
|
|
in_ack => rx_ack,
|
|
in_stb => rx_stb,
|
|
in_data => rx_data,
|
|
|
|
out_data => rx_sample,
|
|
out_ack => rx_fifo_ack,
|
|
|
|
dclk => dma_req_rx_aclk,
|
|
dresetn => dma_req_rx_rstn,
|
|
davalid => dma_req_rx_davalid,
|
|
daready => dma_req_rx_daready,
|
|
datype => dma_req_rx_datype,
|
|
drvalid => dma_req_rx_drvalid,
|
|
drready => dma_req_rx_drready,
|
|
drtype => dma_req_rx_drtype,
|
|
drlast => dma_req_rx_drlast
|
|
);
|
|
|
|
end generate;
|
|
|
|
no_pl330_dma_rx_gen: if DMA_TYPE /= 1 or HAS_RX /= 1 generate
|
|
dma_req_rx_daready <= '0';
|
|
dma_req_rx_drvalid <= '0';
|
|
dma_req_rx_drtype <= (others => '0');
|
|
dma_req_rx_drlast <= '0';
|
|
end generate;
|
|
|
|
ctrl : entity i2s_controller
|
|
generic map (
|
|
C_SLOT_WIDTH => SLOT_WIDTH,
|
|
C_BCLK_POL => BCLK_POL,
|
|
C_LRCLK_POL => LRCLK_POL,
|
|
C_NUM_CH => NUM_OF_CHANNEL,
|
|
C_HAS_TX => HAS_TX,
|
|
C_HAS_RX => HAS_RX
|
|
)
|
|
port map (
|
|
clk => s_axi_aclk,
|
|
resetn => s_axi_aresetn,
|
|
|
|
data_clk => data_clk_i,
|
|
bclk_o => bclk_o,
|
|
lrclk_o => lrclk_o,
|
|
sdata_o => sdata_o,
|
|
sdata_i => sdata_i,
|
|
|
|
tx_enable => tx_enable,
|
|
tx_ack => tx_ack,
|
|
tx_stb => tx_stb,
|
|
tx_data => tx_data,
|
|
|
|
rx_enable => rx_enable,
|
|
rx_ack => rx_ack,
|
|
rx_stb => rx_stb,
|
|
rx_data => rx_data,
|
|
|
|
bclk_div_rate => bclk_div_rate,
|
|
lrclk_div_rate => lrclk_div_rate
|
|
);
|
|
|
|
i2s_reset <= I2S_RESET_REG(0);
|
|
tx_fifo_reset <= I2S_RESET_REG(1);
|
|
rx_fifo_reset <= I2S_RESET_REG(2);
|
|
tx_enable <= I2S_CONTROL_REG(0) = '1';
|
|
rx_enable <= I2S_CONTROL_REG(1) = '1';
|
|
bclk_div_rate <= to_integer(unsigned(I2S_CLK_CONTROL_REG(7 downto 0)));
|
|
lrclk_div_rate <= to_integer(unsigned(I2S_CLK_CONTROL_REG(23 downto 16)));
|
|
period_len <= to_integer(unsigned(PERIOD_LEN_REG(15 downto 0)));
|
|
|
|
ctrlif: entity axi_ctrlif
|
|
generic map (
|
|
C_S_AXI_ADDR_WIDTH => S_AXI_ADDRESS_WIDTH,
|
|
C_S_AXI_DATA_WIDTH => S_AXI_DATA_WIDTH,
|
|
C_NUM_REG => 12
|
|
)
|
|
port map(
|
|
s_axi_aclk => s_axi_aclk,
|
|
s_axi_aresetn => s_axi_aresetn,
|
|
s_axi_awaddr => s_axi_awaddr,
|
|
s_axi_awvalid => s_axi_awvalid,
|
|
s_axi_wdata => s_axi_wdata,
|
|
s_axi_wstrb => s_axi_wstrb,
|
|
s_axi_wvalid => s_axi_wvalid,
|
|
s_axi_bready => s_axi_bready,
|
|
s_axi_araddr => s_axi_araddr,
|
|
s_axi_arvalid => s_axi_arvalid,
|
|
s_axi_rready => s_axi_rready,
|
|
s_axi_arready => s_axi_arready,
|
|
s_axi_rdata => s_axi_rdata,
|
|
s_axi_rresp => s_axi_rresp,
|
|
s_axi_rvalid => s_axi_rvalid,
|
|
s_axi_wready => s_axi_wready,
|
|
s_axi_bresp => s_axi_bresp,
|
|
s_axi_bvalid => s_axi_bvalid,
|
|
s_axi_awready => s_axi_awready,
|
|
|
|
rd_addr => rd_addr,
|
|
rd_data => rd_data,
|
|
rd_ack => rd_ack,
|
|
rd_stb => const_1,
|
|
|
|
wr_addr => wr_addr,
|
|
wr_data => wr_data,
|
|
wr_ack => const_1,
|
|
wr_stb => wr_stb
|
|
);
|
|
|
|
process(rd_addr, I2S_CONTROL_REG, I2S_CLK_CONTROL_REG, PERIOD_LEN_REG, rx_sample, cnt)
|
|
begin
|
|
case rd_addr is
|
|
when 1 => rd_data <= I2S_CONTROL_REG and x"00000003";
|
|
when 2 => rd_data <= I2S_CLK_CONTROL_REG and x"00ff00ff";
|
|
when 6 => rd_data <= PERIOD_LEN_REG and x"0000ffff";
|
|
when 10 => rd_data <= rx_sample & std_logic_vector(to_unsigned(cnt, 8));
|
|
when others => rd_data <= (others => '0');
|
|
end case;
|
|
end process;
|
|
|
|
process(s_axi_aclk) is
|
|
begin
|
|
if rising_edge(s_axi_aclk) then
|
|
if s_axi_aresetn = '0' then
|
|
I2S_RESET_REG <= (others => '0');
|
|
I2S_CONTROL_REG <= (others => '0');
|
|
I2S_CLK_CONTROL_REG <= (others => '0');
|
|
PERIOD_LEN_REG <= (others => '0');
|
|
else
|
|
-- Auto-clear the Reset Register bits
|
|
I2S_RESET_REG(0) <= '0';
|
|
I2S_RESET_REG(1) <= '0';
|
|
I2S_RESET_REG(2) <= '0';
|
|
if wr_stb = '1' then
|
|
case wr_addr is
|
|
when 0 => I2S_RESET_REG <= wr_data;
|
|
when 1 => I2S_CONTROL_REG <= wr_data;
|
|
when 2 => I2S_CLK_CONTROL_REG <= wr_data;
|
|
when 6 => PERIOD_LEN_REG <= wr_data;
|
|
when others => null;
|
|
end case;
|
|
end if;
|
|
end if;
|
|
end if;
|
|
end process;
|
|
|
|
end Behavioral;
|