285 lines
9.2 KiB
Verilog
285 lines
9.2 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2014 - 2022 (c) Analog Devices, Inc. All rights reserved.
|
|
//
|
|
// In this HDL repository, there are many different and unique modules, consisting
|
|
// of various HDL (Verilog or VHDL) components. The individual modules are
|
|
// developed independently, and may be accompanied by separate and unique license
|
|
// terms.
|
|
//
|
|
// The user should read each of these license terms, and understand the
|
|
// freedoms and responsibilities that he or she has by using this source/core.
|
|
//
|
|
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
// A PARTICULAR PURPOSE.
|
|
//
|
|
// Redistribution and use of source or resulting binaries, with or without modification
|
|
// of this file, are permitted under one of the following two license terms:
|
|
//
|
|
// 1. The GNU General Public License version 2 as published by the
|
|
// Free Software Foundation, which can be found in the top level directory
|
|
// of this repository (LICENSE_GPL2), and also online at:
|
|
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
|
|
//
|
|
// OR
|
|
//
|
|
// 2. An ADI specific BSD license, which can be found in the top level directory
|
|
// of this repository (LICENSE_ADIBSD), and also on-line at:
|
|
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
|
|
// This will allow to generate bit files and not release the source code,
|
|
// as long as it attaches to an ADI device.
|
|
//
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
// Constraints:
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module util_do_ram #(
|
|
parameter SRC_DATA_WIDTH = 512,
|
|
parameter DST_DATA_WIDTH = 128,
|
|
|
|
parameter LENGTH_WIDTH = 16
|
|
) (
|
|
input wr_request_enable,
|
|
input wr_request_valid,
|
|
output reg wr_request_ready = 1'b0,
|
|
input [LENGTH_WIDTH-1:0] wr_request_length,
|
|
output reg [LENGTH_WIDTH-1:0] wr_response_measured_length = 'h0,
|
|
output reg wr_response_eot = 1'b0,
|
|
|
|
input rd_request_enable,
|
|
input rd_request_valid,
|
|
output rd_request_ready,
|
|
input [LENGTH_WIDTH-1:0] rd_request_length,
|
|
output rd_response_eot,
|
|
|
|
// Slave streaming AXI interface
|
|
input s_axis_aclk,
|
|
input s_axis_aresetn,
|
|
output reg s_axis_ready = 1'b0,
|
|
input s_axis_valid,
|
|
input [SRC_DATA_WIDTH-1:0] s_axis_data,
|
|
input [SRC_DATA_WIDTH/8-1:0] s_axis_strb,
|
|
input [SRC_DATA_WIDTH/8-1:0] s_axis_keep,
|
|
input [0:0] s_axis_user,
|
|
input s_axis_last,
|
|
|
|
// Master streaming AXI interface
|
|
input m_axis_aclk,
|
|
input m_axis_aresetn,
|
|
input m_axis_ready,
|
|
output m_axis_valid,
|
|
output [DST_DATA_WIDTH-1:0] m_axis_data,
|
|
output [DST_DATA_WIDTH/8-1:0] m_axis_strb,
|
|
output [DST_DATA_WIDTH/8-1:0] m_axis_keep,
|
|
output [0:0] m_axis_user,
|
|
output m_axis_last
|
|
);
|
|
|
|
// src = s_axis_* = wr
|
|
// dst = m_axis_* = rd
|
|
//
|
|
|
|
localparam RAM_LATENCY = 2;
|
|
|
|
localparam SRC_ADDR_ALIGN = $clog2(SRC_DATA_WIDTH/8);
|
|
localparam DST_ADDR_ALIGN = $clog2(DST_DATA_WIDTH/8);
|
|
|
|
localparam SRC_ADDRESS_WIDTH = LENGTH_WIDTH - SRC_ADDR_ALIGN;
|
|
localparam DST_ADDRESS_WIDTH = LENGTH_WIDTH - DST_ADDR_ALIGN;
|
|
|
|
wire wr_enable;
|
|
wire [DST_DATA_WIDTH-1:0] rd_data;
|
|
wire [1:0] rd_fifo_room;
|
|
wire rd_enable;
|
|
wire rd_last_beat;
|
|
wire rd_fifo_s_ready;
|
|
wire rd_fifo_s_valid;
|
|
|
|
reg [SRC_ADDRESS_WIDTH-1:0] wr_length = 'h0;
|
|
reg [SRC_ADDRESS_WIDTH-1:0] wr_addr = 'h0;
|
|
reg [DST_DATA_WIDTH-1:0] rd_data_l2 = 'h0;
|
|
reg [DST_ADDRESS_WIDTH-1:0] rd_length = 'h0;
|
|
reg [DST_ADDRESS_WIDTH-1:0] rd_addr = 'h0;
|
|
reg rd_pending = 1'b0;
|
|
|
|
always @(posedge s_axis_aclk) begin
|
|
if (~s_axis_aresetn)
|
|
wr_request_ready <= 1'b1;
|
|
else if (wr_request_valid)
|
|
wr_request_ready <= 1'b0;
|
|
else if (wr_response_eot)
|
|
wr_request_ready <= 1'b1;
|
|
end
|
|
|
|
always @(posedge s_axis_aclk) begin
|
|
if (wr_request_valid & wr_request_ready)
|
|
wr_length <= wr_request_length[LENGTH_WIDTH-1:SRC_ADDR_ALIGN];
|
|
end
|
|
|
|
wire wr_last_beat;
|
|
assign wr_last_beat = s_axis_valid & s_axis_ready & ((wr_addr == wr_length) | s_axis_last);
|
|
|
|
always @(posedge s_axis_aclk) begin
|
|
if (~wr_request_enable)
|
|
s_axis_ready <= 1'b0;
|
|
else if (wr_request_valid & wr_request_ready)
|
|
s_axis_ready <= 1'b1;
|
|
else if (wr_last_beat) begin
|
|
s_axis_ready <= 1'b0;
|
|
end
|
|
end
|
|
|
|
always @(posedge s_axis_aclk) begin
|
|
if (s_axis_valid & s_axis_ready)
|
|
wr_response_eot <= s_axis_last | (wr_addr == wr_length);
|
|
else
|
|
wr_response_eot <= 1'b0;
|
|
end
|
|
|
|
always @(posedge s_axis_aclk) begin
|
|
if (wr_last_beat)
|
|
wr_response_measured_length <= {wr_addr, {SRC_ADDR_ALIGN{1'b1}}};
|
|
end
|
|
|
|
reg wr_full = 1'b0;
|
|
// Protect against larger transfers than storage
|
|
always @(posedge s_axis_aclk) begin
|
|
if (wr_request_valid & wr_request_ready)
|
|
wr_full <= 1'b0;
|
|
else if (&wr_addr & (s_axis_valid & s_axis_ready))
|
|
wr_full <= 1'b1;
|
|
end
|
|
|
|
// Do not roll over write address
|
|
always @(posedge s_axis_aclk) begin
|
|
if (~wr_request_enable | wr_last_beat)
|
|
wr_addr <= 'h0;
|
|
else if (s_axis_valid & s_axis_ready & (~(&wr_addr)))
|
|
wr_addr <= wr_addr + 1;
|
|
end
|
|
assign wr_enable = s_axis_valid & s_axis_ready & ~wr_full;
|
|
|
|
ad_mem_asym #(
|
|
.A_ADDRESS_WIDTH (SRC_ADDRESS_WIDTH),
|
|
.A_DATA_WIDTH (SRC_DATA_WIDTH),
|
|
.B_ADDRESS_WIDTH (DST_ADDRESS_WIDTH),
|
|
.B_DATA_WIDTH (DST_DATA_WIDTH)
|
|
) i_mem (
|
|
.clka (s_axis_aclk),
|
|
.wea (wr_enable),
|
|
.addra (wr_addr),
|
|
.dina (s_axis_data),
|
|
|
|
.clkb (m_axis_aclk),
|
|
.reb (1'b1),
|
|
.addrb (rd_addr),
|
|
.doutb (rd_data));
|
|
|
|
reg rd_active = 1'b0;
|
|
reg [1:0] rd_req_cnt = 2'b0;
|
|
always @(posedge m_axis_aclk) begin
|
|
if (~rd_request_enable)
|
|
rd_req_cnt <= 2'b0;
|
|
else if (rd_request_valid & rd_request_ready)
|
|
rd_req_cnt <= rd_req_cnt + 2'b1;
|
|
else if (rd_response_eot)
|
|
rd_req_cnt <= rd_req_cnt - 2'b1;
|
|
end
|
|
|
|
assign rd_request_ready = ~rd_req_cnt[1];
|
|
|
|
always @(posedge m_axis_aclk) begin
|
|
if (rd_request_valid & rd_request_ready)
|
|
rd_length <= rd_request_length[LENGTH_WIDTH-1:DST_ADDR_ALIGN];
|
|
end
|
|
|
|
wire rd_early_finish;
|
|
|
|
assign rd_early_finish = rd_active & ~rd_request_enable;
|
|
assign rd_last_beat = (rd_addr == rd_length) & rd_enable;
|
|
assign rd_response_eot = (m_axis_last & m_axis_valid & m_axis_ready) || rd_early_finish;
|
|
|
|
// Read logic
|
|
always @(posedge m_axis_aclk) begin
|
|
if (~rd_request_enable)
|
|
rd_active <= 1'b0;
|
|
else if (rd_request_valid & rd_request_ready)
|
|
rd_active <= 1'b1;
|
|
else if (rd_last_beat)
|
|
rd_active <= rd_req_cnt == 2;
|
|
end
|
|
|
|
assign rd_enable = rd_fifo_s_ready & rd_active &
|
|
(rd_fifo_room >= (m_axis_valid&m_axis_ready ? 1 : RAM_LATENCY));
|
|
|
|
always @(posedge m_axis_aclk) begin
|
|
if (~rd_request_enable | rd_last_beat)
|
|
rd_addr <= 'h0;
|
|
else if (rd_enable)
|
|
rd_addr <= rd_addr + 1;
|
|
end
|
|
|
|
// Delay read enable with latency cycles
|
|
// <TODO> make this depend on parameter
|
|
reg rd_valid_l1 = 1'b0;
|
|
reg rd_valid_l2 = 1'b0;
|
|
reg rd_last_l1 = 1'b0;
|
|
reg rd_last_l2 = 1'b0;
|
|
always @(posedge m_axis_aclk) begin
|
|
rd_valid_l1 <= rd_enable;
|
|
rd_last_l1 <= rd_last_beat;
|
|
end
|
|
|
|
// Extra pipeline to be sucked in by the BRAM/URAM output stage
|
|
always @(posedge m_axis_aclk) begin
|
|
if (rd_valid_l1)
|
|
rd_data_l2 <= rd_data;
|
|
end
|
|
|
|
always @(posedge m_axis_aclk) begin
|
|
if (rd_valid_l1)
|
|
rd_valid_l2 <= 1'b1;
|
|
else if (rd_fifo_s_ready)
|
|
rd_valid_l2 <= 1'b0;
|
|
|
|
if (rd_valid_l1)
|
|
rd_last_l2 <= rd_last_l1;
|
|
end
|
|
|
|
assign rd_fifo_s_valid = rd_valid_l2;
|
|
|
|
// Read datapath to AXIS logic
|
|
util_axis_fifo #(
|
|
.DATA_WIDTH(DST_DATA_WIDTH+1),
|
|
.ADDRESS_WIDTH(2),
|
|
.ASYNC_CLK(0),
|
|
.M_AXIS_REGISTERED(0)
|
|
) i_rd_fifo (
|
|
.s_axis_aclk(m_axis_aclk),
|
|
.s_axis_aresetn(m_axis_aresetn & rd_request_enable),
|
|
.s_axis_valid(rd_fifo_s_valid),
|
|
.s_axis_ready(rd_fifo_s_ready),
|
|
.s_axis_full(),
|
|
.s_axis_data({rd_last_l2,rd_data_l2}),
|
|
.s_axis_room(rd_fifo_room),
|
|
.s_axis_tkeep(),
|
|
.s_axis_tlast(),
|
|
.s_axis_almost_full(),
|
|
|
|
.m_axis_aclk(m_axis_aclk),
|
|
.m_axis_aresetn(m_axis_aresetn & rd_request_enable),
|
|
.m_axis_valid(m_axis_valid),
|
|
.m_axis_ready(m_axis_ready),
|
|
.m_axis_data({m_axis_last,m_axis_data}),
|
|
.m_axis_level(),
|
|
.m_axis_empty(),
|
|
.m_axis_tkeep(),
|
|
.m_axis_tlast(),
|
|
.m_axis_almost_empty());
|
|
|
|
endmodule
|