pluto_hdl_adi/library/common/up_xfer_status.v

117 lines
3.6 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms.
// The user should keep this in in mind while exploring these cores.
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
// (at the option of the user):
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module up_xfer_status #(
parameter DATA_WIDTH = 8) (
// up interface
input up_rstn,
input up_clk,
output reg [DW:0] up_data_status,
// device interface
input d_rst,
input d_clk,
input [DW:0] d_data_status);
localparam DW = DATA_WIDTH - 1;
// internal registers
reg d_xfer_state_m1 = 'd0;
reg d_xfer_state_m2 = 'd0;
reg d_xfer_state = 'd0;
reg [ 5:0] d_xfer_count = 'd0;
reg d_xfer_toggle = 'd0;
reg [DW:0] d_xfer_data = 'd0;
reg [DW:0] d_acc_data = 'd0;
reg up_xfer_toggle_m1 = 'd0;
reg up_xfer_toggle_m2 = 'd0;
reg up_xfer_toggle_m3 = 'd0;
reg up_xfer_toggle = 'd0;
// internal signals
wire d_xfer_enable_s;
wire up_xfer_toggle_s;
// device status transfer
assign d_xfer_enable_s = d_xfer_state ^ d_xfer_toggle;
always @(posedge d_clk or posedge d_rst) begin
if (d_rst == 1'b1) begin
d_xfer_state_m1 <= 'd0;
d_xfer_state_m2 <= 'd0;
d_xfer_state <= 'd0;
d_xfer_count <= 'd0;
d_xfer_toggle <= 'd0;
d_xfer_data <= 'd0;
d_acc_data <= 'd0;
end else begin
d_xfer_state_m1 <= up_xfer_toggle;
d_xfer_state_m2 <= d_xfer_state_m1;
d_xfer_state <= d_xfer_state_m2;
d_xfer_count <= d_xfer_count + 1'd1;
if ((d_xfer_count == 6'd1) && (d_xfer_enable_s == 1'b0)) begin
d_xfer_toggle <= ~d_xfer_toggle;
d_xfer_data <= d_acc_data;
end
if ((d_xfer_count == 6'd1) && (d_xfer_enable_s == 1'b0)) begin
d_acc_data <= d_data_status;
end else begin
d_acc_data <= d_acc_data | d_data_status;
end
end
end
assign up_xfer_toggle_s = up_xfer_toggle_m3 ^ up_xfer_toggle_m2;
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_xfer_toggle_m1 <= 'd0;
up_xfer_toggle_m2 <= 'd0;
up_xfer_toggle_m3 <= 'd0;
up_xfer_toggle <= 'd0;
up_data_status <= 'd0;
end else begin
up_xfer_toggle_m1 <= d_xfer_toggle;
up_xfer_toggle_m2 <= up_xfer_toggle_m1;
up_xfer_toggle_m3 <= up_xfer_toggle_m2;
up_xfer_toggle <= up_xfer_toggle_m3;
if (up_xfer_toggle_s == 1'b1) begin
up_data_status <= d_xfer_data;
end
end
end
endmodule
// ***************************************************************************
// ***************************************************************************