pluto_hdl_adi/library/common/ad_axis_inf_rx.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory
//      of this repository (LICENSE_GPL2), and also online at:
//      <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
//   2. An ADI specific BSD license, which can be found in the top level directory
//      of this repository (LICENSE_ADIBSD), and also on-line at:
//      https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
//      This will allow to generate bit files and not release the source code,
//      as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module ad_axis_inf_rx #(

  parameter   DATA_WIDTH = 16) (

  // adi interface

  input                           clk,
  input                           rst,
  input                           valid,
  input                           last,
  input       [(DATA_WIDTH-1):0]  data,

  // xilinx interface

  output  reg                     inf_valid = 1'b0,
  output  reg                     inf_last = 1'b0,
  output  reg [(DATA_WIDTH-1):0]  inf_data = {DATA_WIDTH{1'b0}},
  input                           inf_ready,

  output                          int_not_full);

  // internal registers

  reg     [ 2:0]              wcnt = 'd0;
  reg                         wlast_0 = 'd0;
  reg     [(DATA_WIDTH-1):0]  wdata_0 = 'd0;
  reg                         wlast_1 = 'd0;
  reg     [(DATA_WIDTH-1):0]  wdata_1 = 'd0;
  reg                         wlast_2 = 'd0;
  reg     [(DATA_WIDTH-1):0]  wdata_2 = 'd0;
  reg                         wlast_3 = 'd0;
  reg     [(DATA_WIDTH-1):0]  wdata_3 = 'd0;
  reg                         wlast_4 = 'd0;
  reg     [(DATA_WIDTH-1):0]  wdata_4 = 'd0;
  reg                         wlast_5 = 'd0;
  reg     [(DATA_WIDTH-1):0]  wdata_5 = 'd0;
  reg                         wlast_6 = 'd0;
  reg     [(DATA_WIDTH-1):0]  wdata_6 = 'd0;
  reg                         wlast_7 = 'd0;
  reg     [(DATA_WIDTH-1):0]  wdata_7 = 'd0;
  reg     [ 2:0]              rcnt    = 'd0;

  // internal signals

  wire                        inf_ready_s;
  reg                         inf_last_s;
  reg     [(DATA_WIDTH-1):0]  inf_data_s;

  // write interface

  always @(posedge clk) begin
    if (rst == 1'b1) begin
      wcnt <= 'd0;
    end else if (valid == 1'b1) begin
      wcnt <= wcnt + 1'b1;
    end
    if ((wcnt == 3'd0) && (valid == 1'b1)) begin
      wlast_0 <= last;
      wdata_0 <= data;
    end
    if ((wcnt == 3'd1) && (valid == 1'b1)) begin
      wlast_1 <= last;
      wdata_1 <= data;
    end
    if ((wcnt == 3'd2) && (valid == 1'b1)) begin
      wlast_2 <= last;
      wdata_2 <= data;
    end
    if ((wcnt == 3'd3) && (valid == 1'b1)) begin
      wlast_3 <= last;
      wdata_3 <= data;
    end
    if ((wcnt == 3'd4) && (valid == 1'b1)) begin
      wlast_4 <= last;
      wdata_4 <= data;
    end
    if ((wcnt == 3'd5) && (valid == 1'b1)) begin
      wlast_5 <= last;
      wdata_5 <= data;
    end
    if ((wcnt == 3'd6) && (valid == 1'b1)) begin
      wlast_6 <= last;
      wdata_6 <= data;
    end
    if ((wcnt == 3'd7) && (valid == 1'b1)) begin
      wlast_7 <= last;
      wdata_7 <= data;
    end
  end

  // read interface

  assign inf_ready_s = inf_ready | ~inf_valid;
  assign int_not_full = inf_ready_s;

  always @(rcnt or wlast_0 or wdata_0 or wlast_1 or wdata_1 or
    wlast_2 or wdata_2 or wlast_3 or wdata_3 or wlast_4 or wdata_4 or
    wlast_5 or wdata_5 or wlast_6 or wdata_6 or wlast_7 or wdata_7) begin
    case (rcnt)
      3'd0: begin
        inf_last_s = wlast_0;
        inf_data_s = wdata_0;
      end
      3'd1: begin
        inf_last_s = wlast_1;
        inf_data_s = wdata_1;
      end
      3'd2: begin
        inf_last_s = wlast_2;
        inf_data_s = wdata_2;
      end
      3'd3: begin
        inf_last_s = wlast_3;
        inf_data_s = wdata_3;
      end
      3'd4: begin
        inf_last_s = wlast_4;
        inf_data_s = wdata_4;
      end
      3'd5: begin
        inf_last_s = wlast_5;
        inf_data_s = wdata_5;
      end
      3'd6: begin
        inf_last_s = wlast_6;
        inf_data_s = wdata_6;
      end
      default: begin
        inf_last_s = wlast_7;
        inf_data_s = wdata_7;
      end
    endcase
  end

  always @(posedge clk) begin
    if (rst == 1'b1) begin
      rcnt <= 'd0;
      inf_valid <= 'd0;
      inf_last <= 'b0;
      inf_data <= 'd0;
    end else if (inf_ready_s == 1'b1) begin
      if (rcnt == wcnt) begin
        rcnt <= rcnt;
        inf_valid <= 1'd0;
        inf_last <= 1'b0;
        inf_data <= 'd0;
      end else begin
        rcnt <= rcnt + 1'b1;
        inf_valid <= 1'b1;
        inf_last <= inf_last_s;
        inf_data <= inf_data_s;
      end
    end
  end

endmodule

// ***************************************************************************
// ***************************************************************************