396 lines
15 KiB
Verilog
Executable File
396 lines
15 KiB
Verilog
Executable File
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright (C) 2021-2023 Analog Devices, Inc. All rights reserved.
|
|
//
|
|
// In this HDL repository, there are many different and unique modules, consisting
|
|
// of various HDL (Verilog or VHDL) components. The individual modules are
|
|
// developed independently, and may be accompanied by separate and unique license
|
|
// terms.
|
|
//
|
|
// The user should read each of these license terms, and understand the
|
|
// freedoms and responsibilities that he or she has by using this source/core.
|
|
//
|
|
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
// A PARTICULAR PURPOSE.
|
|
//
|
|
// Redistribution and use of source or resulting binaries, with or without modification
|
|
// of this file, are permitted under one of the following two license terms:
|
|
//
|
|
// 1. The GNU General Public License version 2 as published by the
|
|
// Free Software Foundation, which can be found in the top level directory
|
|
// of this repository (LICENSE_GPL2), and also online at:
|
|
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
|
|
//
|
|
// OR
|
|
//
|
|
// 2. An ADI specific BSD license, which can be found in the top level directory
|
|
// of this repository (LICENSE_ADIBSD), and also on-line at:
|
|
// https://github.com/analogdevicesinc/hdl/blob/main/LICENSE_ADIBSD
|
|
// This will allow to generate bit files and not release the source code,
|
|
// as long as it attaches to an ADI device.
|
|
//
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module system_top (
|
|
|
|
// clock and resets
|
|
|
|
input sys_clk,
|
|
input fpga_resetn,
|
|
input hps_ref_clk,
|
|
|
|
// hps-ddr4 (72)
|
|
|
|
input hps_ddr_ref_clk,
|
|
input hps_ddr_rzq,
|
|
output [ 16:0] hps_ddr_a,
|
|
output [ 0:0] hps_ddr_act_n,
|
|
input [ 0:0] hps_ddr_alert_n,
|
|
output [ 1:0] hps_ddr_ba,
|
|
output [ 0:0] hps_ddr_bg,
|
|
output [ 0:0] hps_ddr_ck,
|
|
output [ 0:0] hps_ddr_ck_n,
|
|
output [ 0:0] hps_ddr_cke,
|
|
output [ 0:0] hps_ddr_odt,
|
|
output [ 0:0] hps_ddr_par,
|
|
output [ 0:0] hps_ddr_cs_n,
|
|
output [ 0:0] hps_ddr_reset_n,
|
|
inout [ 8:0] hps_ddr_dqs_p,
|
|
inout [ 8:0] hps_ddr_dqs_n,
|
|
inout [ 8:0] hps_ddr_dbi_n,
|
|
inout [ 71:0] hps_ddr_dq,
|
|
|
|
// hps-ethernet
|
|
|
|
input [ 0:0] hps_emac_rx_clk,
|
|
input [ 0:0] hps_emac_rx_ctl,
|
|
input [ 3:0] hps_emac_rx,
|
|
output [ 0:0] hps_emac_tx_clk,
|
|
output [ 0:0] hps_emac_tx_ctl,
|
|
output [ 3:0] hps_emac_tx,
|
|
output [ 0:0] hps_emac_mdc,
|
|
inout [ 0:0] hps_emac_mdio,
|
|
|
|
// hps-usb
|
|
|
|
input [ 0:0] hps_usb_clk,
|
|
input [ 0:0] hps_usb_dir,
|
|
input [ 0:0] hps_usb_nxt,
|
|
output [ 0:0] hps_usb_stp,
|
|
inout [ 7:0] hps_usb_data,
|
|
|
|
// hps-uart
|
|
|
|
input [ 0:0] hps_uart_rx,
|
|
output [ 0:0] hps_uart_tx,
|
|
|
|
// hps-i2c (shared w fmc-a, fmc-b)
|
|
|
|
inout [ 0:0] hps_i2c_sda,
|
|
inout [ 0:0] hps_i2c_scl,
|
|
|
|
// fpga-gpio motherboard (led/dpsw/button)
|
|
|
|
input [ 3:0] fpga_gpio_dpsw,
|
|
input [ 3:0] fpga_gpio_btn,
|
|
output [ 3:0] fpga_gpio_led,
|
|
|
|
// sdmmc-interface
|
|
|
|
output hps_sdmmc_clk,
|
|
inout hps_sdmmc_cmd,
|
|
inout [ 3:0] hps_sdmmc_data,
|
|
|
|
// jtag-interface
|
|
|
|
input hps_jtag_tck,
|
|
input hps_jtag_tms,
|
|
output hps_jtag_tdo,
|
|
input hps_jtag_tdi,
|
|
|
|
// hps-OOBE daughter card peripherals
|
|
|
|
inout hps_gpio_eth_irq,
|
|
inout hps_gpio_usb_oci,
|
|
inout [ 1:0] hps_gpio_btn,
|
|
inout [ 2:0] hps_gpio_led,
|
|
|
|
// ad9213_a JESD204B high-speed interface
|
|
|
|
input rx_ref_a_clk0,
|
|
input rx_ref_a_clk1,
|
|
input rx_device_clk_0,
|
|
input [ 15:0] rx_serial_data_a,
|
|
output rx_sync_a,
|
|
input rx_sysref_a,
|
|
|
|
// ad9213_b JESD204B high-speed interface
|
|
|
|
input rx_ref_b_clk0,
|
|
input rx_ref_b_clk1,
|
|
input [ 15:0] rx_serial_data_b,
|
|
output rx_sync_b,
|
|
|
|
// configuration interfaces
|
|
|
|
inout ad9213_dual_sdio,
|
|
output ad9213_dual_sclk,
|
|
output [ 1:0] ad9213_dual_csn,
|
|
|
|
inout [ 4:0] ad9213_a_gpio,
|
|
inout [ 4:0] ad9213_b_gpio,
|
|
|
|
output ad9213_a_rst,
|
|
output ad9213_b_rst,
|
|
|
|
output ltc6952_csn,
|
|
output ltc6946_csn,
|
|
output ltc_sclk,
|
|
output ltc_sdi,
|
|
input ltc6952_sdo,
|
|
input ltc6946_sdo,
|
|
|
|
output adf4377_sclk,
|
|
inout adf4377_sdio,
|
|
output [ 1:0] adf4377_csn
|
|
);
|
|
|
|
// internal signals
|
|
|
|
wire [ 63:0] gpio_i;
|
|
wire [ 63:0] gpio_o;
|
|
wire spi_mosi_s;
|
|
wire spi_miso_s;
|
|
wire ninit_done_s;
|
|
wire h2f_reset_s;
|
|
wire sys_resetn_s;
|
|
wire ltc_sdo_s;
|
|
wire adf4377_sdi_s;
|
|
wire adf4377_sdo_s;
|
|
wire [511:0] adc_data_0;
|
|
wire [511:0] adc_data_1;
|
|
wire [511:0] link_data_0;
|
|
wire [511:0] link_data_1;
|
|
wire [1023:0] adc_data;
|
|
wire adc_enable_0;
|
|
wire adc_enable_1;
|
|
wire adc_valid;
|
|
wire [ 1:0] ltc_csn;
|
|
wire adc_swap;
|
|
|
|
reg adc_valid_d1;
|
|
reg [1023:0] adc_data_d1;
|
|
reg [511:0] adc_data_0_d1;
|
|
reg [511:0] adc_data_1_d1;
|
|
reg [511:0] adc_data_0_swap;
|
|
reg [511:0] adc_data_1_swap;
|
|
reg adc_swap_d1;
|
|
reg adc_swap_d2;
|
|
|
|
// motherboard-gpio
|
|
|
|
assign gpio_i[3:0] = fpga_gpio_dpsw;
|
|
assign gpio_i[7:4] = fpga_gpio_btn;
|
|
assign gpio_i[31:8] = gpio_o[31:8];
|
|
assign fpga_gpio_led = gpio_o[11:8];
|
|
|
|
// assignments
|
|
|
|
assign adc_swap = gpio_o[34];
|
|
assign ad9213_a_rst = gpio_o[32];
|
|
assign ad9213_b_rst = gpio_o[33];
|
|
assign gpio_i[63:32] = gpio_o[63:32];
|
|
assign ltc6952_csn = ltc_csn[0];
|
|
assign ltc6946_csn = ltc_csn[1];
|
|
|
|
// instantiations
|
|
|
|
ad_3w_spi #(
|
|
.NUM_OF_SLAVES(2)
|
|
) i_ad_3w_spi_ad9213_dual (
|
|
.spi_csn (ad9213_dual_csn),
|
|
.spi_clk (ad9213_dual_sclk),
|
|
.spi_mosi (spi_mosi_s),
|
|
.spi_miso (spi_miso_s),
|
|
.spi_sdio (ad9213_dual_sdio),
|
|
.spi_dir ());
|
|
|
|
ad_3w_spi #(
|
|
.NUM_OF_SLAVES(2)
|
|
) i_ad_3w_spi_adf4377 (
|
|
.spi_csn (adf4377_csn),
|
|
.spi_clk (adf4377_sclk),
|
|
.spi_mosi (adf4377_sdi_s),
|
|
.spi_miso (adf4377_sdo_s),
|
|
.spi_sdio (adf4377_sdio),
|
|
.spi_dir ());
|
|
|
|
// SDO line (MISO) switching for the two ltc
|
|
assign ltc_sdo_s = (ltc_csn == 2'b10) ? ltc6952_sdo :
|
|
(ltc_csn == 2'b01) ? ltc6946_sdo : 1'b0;
|
|
|
|
// system reset is a combination of external reset, HPS reset and S10 init
|
|
// done reset
|
|
assign sys_resetn_s = fpga_resetn & ~h2f_reset_s & ~ninit_done_s;
|
|
|
|
genvar i;
|
|
for (i = 0; i < 512; i = i + 16) begin
|
|
assign adc_data[(2*i)+31:(2*i)] ={adc_data_1_swap[i+15:i],adc_data_0_swap[i+15:i]};
|
|
end
|
|
|
|
always @(posedge rx_device_clk_0) begin
|
|
adc_swap_d1 <= adc_swap;
|
|
adc_swap_d2 <= adc_swap_d1;
|
|
|
|
if (adc_swap_d2 == 1'b0) begin
|
|
adc_data_0_swap <= adc_data_0;
|
|
adc_data_1_swap <= adc_data_1;
|
|
end else begin
|
|
adc_data_0_swap <= adc_data_1;
|
|
adc_data_1_swap <= adc_data_0;
|
|
end
|
|
|
|
adc_data_0_d1 <= adc_data_0;
|
|
adc_data_1_d1 <= adc_data_1;
|
|
|
|
case ({adc_enable_1,adc_enable_0})
|
|
2'b01: adc_data_d1 <= {adc_data_0,adc_data_0_d1};
|
|
2'b10: adc_data_d1 <= {adc_data_1,adc_data_1_d1};
|
|
2'b11: adc_data_d1 <= adc_data;
|
|
default: adc_data_d1 <= adc_data_d1;
|
|
endcase
|
|
case ({adc_enable_1,adc_enable_0})
|
|
2'b01: adc_valid_d1 <= ~adc_valid_d1;
|
|
2'b10: adc_valid_d1 <= ~adc_valid_d1;
|
|
2'b11: adc_valid_d1<= adc_valid;
|
|
default: adc_valid_d1 <= adc_valid;
|
|
endcase
|
|
end
|
|
|
|
system_bd i_system_bd (
|
|
.sys_clk_clk ( sys_clk ),
|
|
.sys_rst_reset_n ( sys_resetn_s ),
|
|
.h2f_reset_reset ( h2f_reset_s ),
|
|
.rst_ninit_done_ninit_done ( ninit_done_s ),
|
|
.sys_gpio_bd_in_port ( gpio_i[31: 0] ),
|
|
.sys_gpio_bd_out_port ( gpio_o[31: 0] ),
|
|
.sys_gpio_in_export ( gpio_i[63:32] ),
|
|
.sys_gpio_out_export ( gpio_o[63:32] ),
|
|
.sys_hps_io_hps_io_phery_emac0_TX_CLK ( hps_emac_tx_clk ),
|
|
.sys_hps_io_hps_io_phery_emac0_TXD0 ( hps_emac_tx[0] ),
|
|
.sys_hps_io_hps_io_phery_emac0_TXD1 ( hps_emac_tx[1] ),
|
|
.sys_hps_io_hps_io_phery_emac0_TXD2 ( hps_emac_tx[2] ),
|
|
.sys_hps_io_hps_io_phery_emac0_TXD3 ( hps_emac_tx[3] ),
|
|
.sys_hps_io_hps_io_phery_emac0_RX_CTL ( hps_emac_rx_ctl ),
|
|
.sys_hps_io_hps_io_phery_emac0_TX_CTL ( hps_emac_tx_ctl ),
|
|
.sys_hps_io_hps_io_phery_emac0_RX_CLK ( hps_emac_rx_clk ),
|
|
.sys_hps_io_hps_io_phery_emac0_RXD0 ( hps_emac_rx[0] ),
|
|
.sys_hps_io_hps_io_phery_emac0_RXD1 ( hps_emac_rx[1] ),
|
|
.sys_hps_io_hps_io_phery_emac0_RXD2 ( hps_emac_rx[2] ),
|
|
.sys_hps_io_hps_io_phery_emac0_RXD3 ( hps_emac_rx[3] ),
|
|
.sys_hps_io_hps_io_phery_emac0_MDIO ( hps_emac_mdio ),
|
|
.sys_hps_io_hps_io_phery_emac0_MDC ( hps_emac_mdc ),
|
|
.sys_hps_io_hps_io_phery_sdmmc_CMD ( hps_sdmmc_cmd ),
|
|
.sys_hps_io_hps_io_phery_sdmmc_D0 ( hps_sdmmc_data[0]),
|
|
.sys_hps_io_hps_io_phery_sdmmc_D1 ( hps_sdmmc_data[1]),
|
|
.sys_hps_io_hps_io_phery_sdmmc_D2 ( hps_sdmmc_data[2]),
|
|
.sys_hps_io_hps_io_phery_sdmmc_D3 ( hps_sdmmc_data[3]),
|
|
.sys_hps_io_hps_io_phery_sdmmc_CCLK ( hps_sdmmc_clk ),
|
|
.sys_hps_io_hps_io_phery_usb0_DATA0 ( hps_usb_data[0] ),
|
|
.sys_hps_io_hps_io_phery_usb0_DATA1 ( hps_usb_data[1] ),
|
|
.sys_hps_io_hps_io_phery_usb0_DATA2 ( hps_usb_data[2] ),
|
|
.sys_hps_io_hps_io_phery_usb0_DATA3 ( hps_usb_data[3] ),
|
|
.sys_hps_io_hps_io_phery_usb0_DATA4 ( hps_usb_data[4] ),
|
|
.sys_hps_io_hps_io_phery_usb0_DATA5 ( hps_usb_data[5] ),
|
|
.sys_hps_io_hps_io_phery_usb0_DATA6 ( hps_usb_data[6] ),
|
|
.sys_hps_io_hps_io_phery_usb0_DATA7 ( hps_usb_data[7] ),
|
|
.sys_hps_io_hps_io_phery_usb0_CLK ( hps_usb_clk ),
|
|
.sys_hps_io_hps_io_phery_usb0_STP ( hps_usb_stp ),
|
|
.sys_hps_io_hps_io_phery_usb0_DIR ( hps_usb_dir ),
|
|
.sys_hps_io_hps_io_phery_usb0_NXT ( hps_usb_nxt ),
|
|
.sys_hps_io_hps_io_phery_uart0_RX ( hps_uart_rx ),
|
|
.sys_hps_io_hps_io_phery_uart0_TX ( hps_uart_tx ),
|
|
.sys_hps_io_hps_io_phery_i2c1_SDA ( hps_i2c_sda ),
|
|
.sys_hps_io_hps_io_phery_i2c1_SCL ( hps_i2c_scl ),
|
|
.sys_hps_io_hps_io_gpio_gpio1_io0 ( hps_gpio_eth_irq ),
|
|
.sys_hps_io_hps_io_gpio_gpio1_io1 ( hps_gpio_usb_oci ),
|
|
.sys_hps_io_hps_io_gpio_gpio1_io4 ( hps_gpio_btn[0] ),
|
|
.sys_hps_io_hps_io_gpio_gpio1_io5 ( hps_gpio_btn[1] ),
|
|
.sys_hps_io_hps_io_jtag_tck ( hps_jtag_tck ),
|
|
.sys_hps_io_hps_io_jtag_tms ( hps_jtag_tms ),
|
|
.sys_hps_io_hps_io_jtag_tdo ( hps_jtag_tdo ),
|
|
.sys_hps_io_hps_io_jtag_tdi ( hps_jtag_tdi ),
|
|
.sys_hps_io_hps_io_hps_ocs_clk ( hps_ref_clk ),
|
|
.sys_hps_io_hps_io_gpio_gpio1_io19 ( hps_gpio_led[1] ),
|
|
.sys_hps_io_hps_io_gpio_gpio1_io20 ( hps_gpio_led[0] ),
|
|
.sys_hps_io_hps_io_gpio_gpio1_io21 ( hps_gpio_led[2] ),
|
|
.sys_hps_ddr_ref_clk_clk ( hps_ddr_ref_clk ),
|
|
.sys_hps_ddr_oct_oct_rzqin ( hps_ddr_rzq ),
|
|
.sys_hps_ddr_mem_ck ( hps_ddr_ck ),
|
|
.sys_hps_ddr_mem_ck_n ( hps_ddr_ck_n ),
|
|
.sys_hps_ddr_mem_a ( hps_ddr_a ),
|
|
.sys_hps_ddr_mem_act_n ( hps_ddr_act_n ),
|
|
.sys_hps_ddr_mem_ba ( hps_ddr_ba ),
|
|
.sys_hps_ddr_mem_bg ( hps_ddr_bg ),
|
|
.sys_hps_ddr_mem_cke ( hps_ddr_cke ),
|
|
.sys_hps_ddr_mem_cs_n ( hps_ddr_cs_n ),
|
|
.sys_hps_ddr_mem_odt ( hps_ddr_odt ),
|
|
.sys_hps_ddr_mem_reset_n ( hps_ddr_reset_n ),
|
|
.sys_hps_ddr_mem_par ( hps_ddr_par ),
|
|
.sys_hps_ddr_mem_alert_n ( hps_ddr_alert_n ),
|
|
.sys_hps_ddr_mem_dqs ( hps_ddr_dqs_p ),
|
|
.sys_hps_ddr_mem_dqs_n ( hps_ddr_dqs_n ),
|
|
.sys_hps_ddr_mem_dq ( hps_ddr_dq ),
|
|
.sys_hps_ddr_mem_dbi_n ( hps_ddr_dbi_n ),
|
|
// Link to TPL connections
|
|
.ad9213_rx_0_link_data_data ( link_data_0 ),
|
|
.ad9213_rx_0_link_data_valid ( link_valid_0 ),
|
|
.ad9213_rx_1_link_data_data ( link_data_1 ),
|
|
.ad9213_rx_1_link_data_valid ( link_valid_1 ),
|
|
.axi_ad9213_dual_tpl_link_data_data ( {link_data_1,link_data_0} ),
|
|
.axi_ad9213_dual_tpl_link_data_valid ( link_valid_1&link_valid_0 ),
|
|
.axi_ad9213_dual_tpl_link_data_ready (),
|
|
// TPL connections to PACK
|
|
.axi_ad9213_dual_tpl_adc_ch_0_enable ( adc_enable_0 ),
|
|
.axi_ad9213_dual_tpl_adc_ch_0_valid ( adc_valid ),
|
|
.axi_ad9213_dual_tpl_adc_ch_0_data ( adc_data_0 ),
|
|
.axi_ad9213_dual_tpl_adc_ch_1_enable ( adc_enable_1 ),
|
|
.axi_ad9213_dual_tpl_adc_ch_1_valid (),
|
|
.axi_ad9213_dual_tpl_adc_ch_1_data ( adc_data_1 ),
|
|
// PACK to ADC FIFO
|
|
.ad9213_adcfifo_if_adc_wr_valid ( adc_valid_d1 ),
|
|
.ad9213_adcfifo_if_adc_wdata_data ( adc_data_d1 ),
|
|
// SPI interface for the two ad9213
|
|
.sys_spi_MISO ( spi_miso_s ),
|
|
.sys_spi_MOSI ( spi_mosi_s ),
|
|
.sys_spi_SCLK ( ad9213_dual_sclk ),
|
|
.sys_spi_SS_n ( ad9213_dual_csn ),
|
|
// SPI interface for the ltc
|
|
.ltc_spi_MISO ( ltc_sdo_s ),
|
|
.ltc_spi_MOSI ( ltc_sdi ),
|
|
.ltc_spi_SCLK ( ltc_sclk ),
|
|
.ltc_spi_SS_n ( ltc_csn ),
|
|
// SPI interface for the ADF4377
|
|
.adf4377_spi_MISO ( adf4377_sdo_s ),
|
|
.adf4377_spi_MOSI ( adf4377_sdi_s ),
|
|
.adf4377_spi_SCLK ( adf4377_sclk ),
|
|
.adf4377_spi_SS_n ( adf4377_csn ),
|
|
// JESD204B high-speed interface
|
|
.rx_ref_clk_0_clk ( rx_ref_a_clk0 ),
|
|
.ad9213_rx_0_serial_data_rx_serial_data ( rx_serial_data_a ),
|
|
.rx_sysref_0_export ( rx_sysref_a ),
|
|
.rx_sync_0_export ( rx_sync_a ),
|
|
.rx_ref_clk_1_clk ( rx_ref_b_clk0 ),
|
|
.ad9213_rx_1_serial_data_rx_serial_data ( rx_serial_data_b ),
|
|
.rx_sysref_1_export ( rx_sysref_a ),
|
|
.rx_sync_1_export ( rx_sync_b ),
|
|
.rx_device_clk_clk ( rx_device_clk_0 ),
|
|
// ad9213_a|b gpio
|
|
.ad9213_dual_pio_export ( {ad9213_b_gpio, ad9213_a_gpio} ));
|
|
|
|
endmodule
|