124 lines
4.9 KiB
Tcl
124 lines
4.9 KiB
Tcl
source $ad_hdl_dir/projects/common/zed/zed_system_bd.tcl
|
|
|
|
##--------------------------------------------------------------
|
|
# IMPORTANT: Set CN0506 interface mode
|
|
#
|
|
# The get_env_param procedure retrieves parameter value from the environment if exists,
|
|
# other case returns the default value specified in its second parameter field.
|
|
#
|
|
# How to use over-writable parameters from the environment:
|
|
#
|
|
# e.g.
|
|
# make INTF_CFG=MII
|
|
#
|
|
# INTF_CFG - Defines the interface type (MII, RGMII or RMII)
|
|
#
|
|
# LEGEND: MII
|
|
# RGMII
|
|
# RMII
|
|
#
|
|
##--------------------------------------------------------------
|
|
|
|
set INTF_CFG [get_env_param INTF_CFG RGMII]
|
|
|
|
switch $INTF_CFG {
|
|
MII {
|
|
source ../common/mii_bd.tcl
|
|
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_QSPI_GRP_SINGLE_SS_ENABLE 1
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET0_ENET0_IO EMIO
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET0_GRP_MDIO_IO EMIO
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET1_PERIPHERAL_ENABLE 1
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET1_GRP_MDIO_ENABLE 1
|
|
|
|
make_bd_intf_pins_external [get_bd_intf_pins sys_ps7/MDIO_ETHERNET_1]
|
|
make_bd_intf_pins_external [get_bd_intf_pins sys_ps7/GMII_ETHERNET_1]
|
|
make_bd_intf_pins_external [get_bd_intf_pins sys_ps7/MDIO_ETHERNET_0]
|
|
make_bd_intf_pins_external [get_bd_intf_pins sys_ps7/GMII_ETHERNET_0]
|
|
}
|
|
RGMII {
|
|
source ../common/rgmii_bd.tcl
|
|
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_QSPI_GRP_SINGLE_SS_ENABLE 1
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET0_ENET0_IO EMIO
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET0_GRP_MDIO_IO EMIO
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET1_PERIPHERAL_ENABLE 1
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET1_GRP_MDIO_ENABLE 1
|
|
|
|
ad_ip_parameter clk_wiz CONFIG.CLKOUT1_REQUESTED_OUT_FREQ 200
|
|
ad_ip_parameter clk_wiz CONFIG.MMCM_CLKIN2_PERIOD 10.0
|
|
|
|
ad_connect sys_ps7/GMII_ETHERNET_0 gmii_to_rgmii_0/GMII
|
|
ad_connect sys_ps7/MDIO_ETHERNET_0 gmii_to_rgmii_0/MDIO_GEM
|
|
ad_connect sys_ps7/GMII_ETHERNET_1 gmii_to_rgmii_1/GMII
|
|
ad_connect sys_ps7/MDIO_ETHERNET_1 gmii_to_rgmii_1/MDIO_GEM
|
|
|
|
# Remove the unused 200MHz reset generator added in the base design.
|
|
|
|
delete_bd_objs [get_bd_nets sys_ps7_FCLK_RESET1_N] \
|
|
[get_bd_nets sys_200m_reset] \
|
|
[get_bd_nets sys_200m_resetn] \
|
|
[get_bd_cells sys_200m_rstgen]
|
|
}
|
|
RMII {
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_QSPI_GRP_SINGLE_SS_ENABLE 1
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET0_ENET0_IO EMIO
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET0_GRP_MDIO_IO EMIO
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET0_PERIPHERAL_FREQMHZ {100 Mbps}
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET1_PERIPHERAL_ENABLE 1
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET1_GRP_MDIO_ENABLE 1
|
|
ad_ip_parameter sys_ps7 CONFIG.PCW_ENET1_PERIPHERAL_FREQMHZ {100 Mbps}
|
|
|
|
create_bd_port -dir O reset_a
|
|
create_bd_port -dir O reset_b
|
|
create_bd_port -dir I ref_clk_50_a
|
|
create_bd_port -dir I ref_clk_50_b
|
|
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:rmii_rtl:1.0 RMII_PHY_M_0
|
|
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:rmii_rtl:1.0 RMII_PHY_M_1
|
|
make_bd_intf_pins_external [get_bd_intf_pins sys_ps7/MDIO_ETHERNET_0]
|
|
make_bd_intf_pins_external [get_bd_intf_pins sys_ps7/MDIO_ETHERNET_1]
|
|
|
|
ad_ip_instance util_mii_to_rmii mii_to_rmii_0
|
|
ad_ip_parameter mii_to_rmii_0 CONFIG.INTF_CFG 1
|
|
ad_ip_parameter mii_to_rmii_0 CONFIG.RATE_10_100 0
|
|
|
|
ad_connect mii_to_rmii_0/GMII sys_ps7/GMII_ETHERNET_0
|
|
ad_connect mii_to_rmii_0/ref_clk ref_clk_50_a
|
|
|
|
ad_connect mii_to_rmii_0/RMII RMII_PHY_M_0
|
|
|
|
ad_ip_instance util_mii_to_rmii mii_to_rmii_1
|
|
ad_ip_parameter mii_to_rmii_1 CONFIG.INTF_CFG 1
|
|
ad_ip_parameter mii_to_rmii_1 CONFIG.RATE_10_100 0
|
|
|
|
ad_connect mii_to_rmii_1/GMII sys_ps7/GMII_ETHERNET_1
|
|
ad_connect mii_to_rmii_1/ref_clk ref_clk_50_b
|
|
|
|
ad_connect mii_to_rmii_1/RMII RMII_PHY_M_1
|
|
|
|
ad_ip_instance proc_sys_reset proc_sys_reset_eth0
|
|
ad_connect proc_sys_reset_eth0/slowest_sync_clk ref_clk_50_a
|
|
ad_connect proc_sys_reset_eth0/ext_reset_in sys_rstgen/peripheral_aresetn
|
|
ad_connect proc_sys_reset_eth0/peripheral_reset reset_a
|
|
ad_connect proc_sys_reset_eth0/peripheral_aresetn mii_to_rmii_0/reset_n
|
|
|
|
ad_ip_instance proc_sys_reset proc_sys_reset_eth1
|
|
ad_connect proc_sys_reset_eth1/slowest_sync_clk ref_clk_50_b
|
|
ad_connect proc_sys_reset_eth1/ext_reset_in sys_rstgen/peripheral_aresetn
|
|
ad_connect proc_sys_reset_eth1/peripheral_reset reset_b
|
|
ad_connect proc_sys_reset_eth1/peripheral_aresetn mii_to_rmii_1/reset_n
|
|
}
|
|
}
|
|
|
|
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
|
|
|
|
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
|
|
|
|
#system ID
|
|
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
|
|
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
|
|
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
|
|
set INTF_CFG $::env(INTF_CFG)
|
|
set sys_cstring "$INTF_CFG"
|
|
sysid_gen_sys_init_file $sys_cstring
|