pluto_hdl_adi/library/axi_dmac/src_axi_mm.v

204 lines
6.3 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2013(c) Analog Devices, Inc.
// Author: Lars-Peter Clausen <lars@metafoo.de>
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
module dmac_src_mm_axi (
input m_axi_aclk,
input m_axi_aresetn,
input req_valid,
output req_ready,
input [DMA_ADDR_WIDTH-1:BYTES_PER_BEAT_WIDTH] req_address,
input [BEATS_PER_BURST_WIDTH-1:0] req_last_burst_length,
input enable,
output enabled,
input pause,
input sync_id,
output sync_id_ret,
output response_valid,
input response_ready,
output [1:0] response_resp,
input [ID_WIDTH-1:0] request_id,
output [ID_WIDTH-1:0] response_id,
output [ID_WIDTH-1:0] data_id,
output [ID_WIDTH-1:0] address_id,
input data_eot,
input address_eot,
output fifo_valid,
input fifo_ready,
output [DMA_DATA_WIDTH-1:0] fifo_data,
// Read address
input m_axi_arready,
output m_axi_arvalid,
output [DMA_ADDR_WIDTH-1:0] m_axi_araddr,
output [AXI_LENGTH_WIDTH-1:0] m_axi_arlen,
output [ 2:0] m_axi_arsize,
output [ 1:0] m_axi_arburst,
output [ 2:0] m_axi_arprot,
output [ 3:0] m_axi_arcache,
// Read data and response
input [DMA_DATA_WIDTH-1:0] m_axi_rdata,
output m_axi_rready,
input m_axi_rvalid,
input [ 1:0] m_axi_rresp
);
parameter ID_WIDTH = 3;
parameter DMA_DATA_WIDTH = 64;
parameter DMA_ADDR_WIDTH = 32;
parameter BYTES_PER_BEAT_WIDTH = 3;
parameter BEATS_PER_BURST_WIDTH = 4;
parameter AXI_LENGTH_WIDTH = 8;
`include "resp.h"
wire address_enabled;
wire address_req_valid;
wire address_req_ready;
wire data_req_valid;
wire data_req_ready;
assign sync_id_ret = sync_id;
assign response_id = data_id;
assign response_valid = 1'b0;
assign response_resp = RESP_OKAY;
splitter #(
.NUM_M(2)
) i_req_splitter (
.clk(m_axi_aclk),
.resetn(m_axi_aresetn),
.s_valid(req_valid),
.s_ready(req_ready),
.m_valid({
address_req_valid,
data_req_valid
}),
.m_ready({
address_req_ready,
data_req_ready
})
);
dmac_address_generator #(
.ID_WIDTH(ID_WIDTH),
.BEATS_PER_BURST_WIDTH(BEATS_PER_BURST_WIDTH),
.BYTES_PER_BEAT_WIDTH(BYTES_PER_BEAT_WIDTH),
.DMA_DATA_WIDTH(DMA_DATA_WIDTH),
.LENGTH_WIDTH(AXI_LENGTH_WIDTH),
.DMA_ADDR_WIDTH(DMA_ADDR_WIDTH)
) i_addr_gen (
.clk(m_axi_aclk),
.resetn(m_axi_aresetn),
.enable(enable),
.enabled(address_enabled),
.pause(pause),
.sync_id(sync_id),
.request_id(request_id),
.id(address_id),
.req_valid(address_req_valid),
.req_ready(address_req_ready),
.req_address(req_address),
.req_last_burst_length(req_last_burst_length),
.eot(address_eot),
.addr_ready(m_axi_arready),
.addr_valid(m_axi_arvalid),
.addr(m_axi_araddr),
.len(m_axi_arlen),
.size(m_axi_arsize),
.burst(m_axi_arburst),
.prot(m_axi_arprot),
.cache(m_axi_arcache)
);
dmac_data_mover # (
.ID_WIDTH(ID_WIDTH),
.DATA_WIDTH(DMA_DATA_WIDTH),
.BEATS_PER_BURST_WIDTH(BEATS_PER_BURST_WIDTH)
) i_data_mover (
.clk(m_axi_aclk),
.resetn(m_axi_aresetn),
.enable(address_enabled),
.enabled(enabled),
.sync_id(sync_id),
.xfer_req(),
.request_id(address_id),
.response_id(data_id),
.eot(data_eot),
.req_valid(data_req_valid),
.req_ready(data_req_ready),
.req_last_burst_length(req_last_burst_length),
.s_axi_valid(m_axi_rvalid),
.s_axi_ready(m_axi_rready),
.s_axi_data(m_axi_rdata),
.m_axi_valid(fifo_valid),
.m_axi_ready(fifo_ready),
.m_axi_data(fifo_data),
.m_axi_last()
);
reg [1:0] rresp;
always @(posedge m_axi_aclk)
begin
if (m_axi_rvalid && m_axi_rready) begin
if (m_axi_rresp != 2'b0)
rresp <= m_axi_rresp;
end
end
endmodule