299 lines
8.3 KiB
Verilog
299 lines
8.3 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2011(c) Analog Devices, Inc.
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without modification,
|
|
// are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module axi_ad9625 (
|
|
|
|
// jesd interface
|
|
// rx_clk is (line-rate/40)
|
|
|
|
rx_clk,
|
|
rx_data,
|
|
|
|
// dma interface
|
|
|
|
adc_clk,
|
|
adc_rst,
|
|
adc_valid,
|
|
adc_enable,
|
|
adc_data,
|
|
adc_dovf,
|
|
adc_dunf,
|
|
adc_sref,
|
|
adc_raddr_in,
|
|
adc_raddr_out,
|
|
|
|
// axi interface
|
|
|
|
s_axi_aclk,
|
|
s_axi_aresetn,
|
|
s_axi_awvalid,
|
|
s_axi_awaddr,
|
|
s_axi_awready,
|
|
s_axi_wvalid,
|
|
s_axi_wdata,
|
|
s_axi_wstrb,
|
|
s_axi_wready,
|
|
s_axi_bvalid,
|
|
s_axi_bresp,
|
|
s_axi_bready,
|
|
s_axi_arvalid,
|
|
s_axi_araddr,
|
|
s_axi_arready,
|
|
s_axi_rvalid,
|
|
s_axi_rresp,
|
|
s_axi_rdata,
|
|
s_axi_rready,
|
|
s_axi_awprot,
|
|
s_axi_arprot);
|
|
|
|
parameter ID = 0;
|
|
parameter DEVICE_TYPE = 0;
|
|
parameter IO_DELAY_GROUP = "adc_if_delay_group";
|
|
|
|
// jesd interface
|
|
// rx_clk is (line-rate/40)
|
|
|
|
input rx_clk;
|
|
input [255:0] rx_data;
|
|
|
|
// dma interface
|
|
|
|
output adc_clk;
|
|
output adc_rst;
|
|
output adc_valid;
|
|
output adc_enable;
|
|
output [255:0] adc_data;
|
|
input adc_dovf;
|
|
input adc_dunf;
|
|
output [ 15:0] adc_sref;
|
|
input [ 3:0] adc_raddr_in;
|
|
output [ 3:0] adc_raddr_out;
|
|
|
|
// axi interface
|
|
|
|
input s_axi_aclk;
|
|
input s_axi_aresetn;
|
|
input s_axi_awvalid;
|
|
input [ 31:0] s_axi_awaddr;
|
|
output s_axi_awready;
|
|
input s_axi_wvalid;
|
|
input [ 31:0] s_axi_wdata;
|
|
input [ 3:0] s_axi_wstrb;
|
|
output s_axi_wready;
|
|
output s_axi_bvalid;
|
|
output [ 1:0] s_axi_bresp;
|
|
input s_axi_bready;
|
|
input s_axi_arvalid;
|
|
input [ 31:0] s_axi_araddr;
|
|
output s_axi_arready;
|
|
output s_axi_rvalid;
|
|
output [ 1:0] s_axi_rresp;
|
|
output [ 31:0] s_axi_rdata;
|
|
input s_axi_rready;
|
|
input [ 2:0] s_axi_awprot;
|
|
input [ 2:0] s_axi_arprot;
|
|
|
|
|
|
// internal registers
|
|
|
|
reg [ 31:0] up_rdata = 'd0;
|
|
reg up_rack = 'd0;
|
|
reg up_wack = 'd0;
|
|
|
|
// internal clocks & resets
|
|
|
|
wire adc_rst;
|
|
wire up_rstn;
|
|
wire up_clk;
|
|
|
|
// internal signals
|
|
|
|
wire [191:0] adc_data_s;
|
|
wire adc_or_s;
|
|
wire adc_status_s;
|
|
wire up_adc_pn_err_s;
|
|
wire up_adc_pn_oos_s;
|
|
wire up_adc_or_s;
|
|
wire [ 31:0] up_rdata_s[0:1];
|
|
wire up_rack_s[0:1];
|
|
wire up_wack_s[0:1];
|
|
wire up_wreq_s;
|
|
wire [ 13:0] up_waddr_s;
|
|
wire [ 31:0] up_wdata_s;
|
|
wire up_rreq_s;
|
|
wire [ 13:0] up_raddr_s;
|
|
|
|
// signal name changes
|
|
|
|
assign up_clk = s_axi_aclk;
|
|
assign up_rstn = s_axi_aresetn;
|
|
|
|
// processor read interface
|
|
|
|
always @(negedge up_rstn or posedge up_clk) begin
|
|
if (up_rstn == 0) begin
|
|
up_rdata <= 'd0;
|
|
up_rack <= 'd0;
|
|
up_wack <= 'd0;
|
|
end else begin
|
|
up_rdata <= up_rdata_s[0] | up_rdata_s[1];
|
|
up_rack <= up_rack_s[0] | up_rack_s[1] ;
|
|
up_wack <= up_wack_s[0] | up_wack_s[1] ;
|
|
end
|
|
end
|
|
|
|
// main (device interface)
|
|
|
|
assign adc_valid = 1'b1;
|
|
|
|
axi_ad9625_if #(.ID(ID)) i_if (
|
|
.rx_clk (rx_clk),
|
|
.rx_data (rx_data),
|
|
.adc_clk (adc_clk),
|
|
.adc_rst (adc_rst),
|
|
.adc_data (adc_data_s),
|
|
.adc_or (adc_or_s),
|
|
.adc_status (adc_status_s),
|
|
.adc_sref (adc_sref),
|
|
.adc_raddr_in (adc_raddr_in),
|
|
.adc_raddr_out (adc_raddr_out));
|
|
|
|
// channel
|
|
|
|
axi_ad9625_channel i_channel (
|
|
.adc_clk (adc_clk),
|
|
.adc_rst (adc_rst),
|
|
.adc_data (adc_data_s),
|
|
.adc_or (adc_or_s),
|
|
.adc_dfmt_data (adc_data),
|
|
.adc_enable (adc_enable),
|
|
.up_adc_pn_err (up_adc_pn_err_s),
|
|
.up_adc_pn_oos (up_adc_pn_oos_s),
|
|
.up_adc_or (up_adc_or_s),
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_wreq (up_wreq_s),
|
|
.up_waddr (up_waddr_s),
|
|
.up_wdata (up_wdata_s),
|
|
.up_wack (up_wack_s[0]),
|
|
.up_rreq (up_rreq_s),
|
|
.up_raddr (up_raddr_s),
|
|
.up_rdata (up_rdata_s[0]),
|
|
.up_rack (up_rack_s[0]));
|
|
|
|
// common processor control
|
|
|
|
up_adc_common #(.ID(ID)) i_up_adc_common (
|
|
.mmcm_rst (),
|
|
.adc_clk (adc_clk),
|
|
.adc_rst (adc_rst),
|
|
.adc_r1_mode (),
|
|
.adc_ddr_edgesel (),
|
|
.adc_pin_mode (),
|
|
.adc_status (adc_status_s),
|
|
.adc_sync_status (1'd0),
|
|
.adc_status_ovf (adc_dovf),
|
|
.adc_status_unf (adc_dunf),
|
|
.adc_clk_ratio (32'd16),
|
|
.adc_start_code (),
|
|
.adc_sync (),
|
|
.up_status_pn_err (up_adc_pn_err_s),
|
|
.up_status_pn_oos (up_adc_pn_oos_s),
|
|
.up_status_or (up_adc_or_s),
|
|
.up_drp_sel (),
|
|
.up_drp_wr (),
|
|
.up_drp_addr (),
|
|
.up_drp_wdata (),
|
|
.up_drp_rdata (32'd0),
|
|
.up_drp_ready (1'd0),
|
|
.up_drp_locked (1'd1),
|
|
.up_usr_chanmax (),
|
|
.adc_usr_chanmax (8'd1),
|
|
.up_adc_gpio_in (32'd0),
|
|
.up_adc_gpio_out (),
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_wreq (up_wreq_s),
|
|
.up_waddr (up_waddr_s),
|
|
.up_wdata (up_wdata_s),
|
|
.up_wack (up_wack_s[1]),
|
|
.up_rreq (up_rreq_s),
|
|
.up_raddr (up_raddr_s),
|
|
.up_rdata (up_rdata_s[1]),
|
|
.up_rack (up_rack_s[1]));
|
|
|
|
// up bus interface
|
|
|
|
up_axi i_up_axi (
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_axi_awvalid (s_axi_awvalid),
|
|
.up_axi_awaddr (s_axi_awaddr),
|
|
.up_axi_awready (s_axi_awready),
|
|
.up_axi_wvalid (s_axi_wvalid),
|
|
.up_axi_wdata (s_axi_wdata),
|
|
.up_axi_wstrb (s_axi_wstrb),
|
|
.up_axi_wready (s_axi_wready),
|
|
.up_axi_bvalid (s_axi_bvalid),
|
|
.up_axi_bresp (s_axi_bresp),
|
|
.up_axi_bready (s_axi_bready),
|
|
.up_axi_arvalid (s_axi_arvalid),
|
|
.up_axi_araddr (s_axi_araddr),
|
|
.up_axi_arready (s_axi_arready),
|
|
.up_axi_rvalid (s_axi_rvalid),
|
|
.up_axi_rresp (s_axi_rresp),
|
|
.up_axi_rdata (s_axi_rdata),
|
|
.up_axi_rready (s_axi_rready),
|
|
.up_wreq (up_wreq_s),
|
|
.up_waddr (up_waddr_s),
|
|
.up_wdata (up_wdata_s),
|
|
.up_wack (up_wack),
|
|
.up_rreq (up_rreq_s),
|
|
.up_raddr (up_raddr_s),
|
|
.up_rdata (up_rdata),
|
|
.up_rack (up_rack));
|
|
|
|
endmodule
|
|
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|