313 lines
9.6 KiB
Verilog
313 lines
9.6 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2011(c) Analog Devices, Inc.
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without modification,
|
|
// are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module axi_logic_analyzer (
|
|
|
|
input clk,
|
|
output clk_out,
|
|
|
|
input [15:0] data_i,
|
|
output reg [15:0] data_o,
|
|
output [15:0] data_t,
|
|
input [ 1:0] trigger_i,
|
|
|
|
output reg adc_valid,
|
|
output reg [15:0] adc_data,
|
|
|
|
input [15:0] dac_data,
|
|
input dac_valid,
|
|
output reg dac_read,
|
|
|
|
output trigger_out,
|
|
output [31:0] trigger_offset,
|
|
|
|
// axi interface
|
|
|
|
input s_axi_aclk,
|
|
input s_axi_aresetn,
|
|
input s_axi_awvalid,
|
|
input [ 6:0] s_axi_awaddr,
|
|
input [ 2:0] s_axi_awprot,
|
|
output s_axi_awready,
|
|
input s_axi_wvalid,
|
|
input [31:0] s_axi_wdata,
|
|
input [ 3:0] s_axi_wstrb,
|
|
output s_axi_wready,
|
|
output s_axi_bvalid,
|
|
output [ 1:0] s_axi_bresp,
|
|
input s_axi_bready,
|
|
input s_axi_arvalid,
|
|
input [ 6:0] s_axi_araddr,
|
|
input [ 2:0] s_axi_arprot,
|
|
output s_axi_arready,
|
|
output s_axi_rvalid,
|
|
output [31:0] s_axi_rdata,
|
|
output [ 1:0] s_axi_rresp,
|
|
input s_axi_rready);
|
|
|
|
// internal registers
|
|
|
|
reg [15:0] data_m1 = 'd0;
|
|
reg [15:0] data_r = 'd0;
|
|
reg [ 1:0] trigger_m1 = 'd0;
|
|
reg [ 1:0] trigger_m2 = 'd0;
|
|
reg [31:0] downsampler_counter_la = 'd0;
|
|
reg [31:0] upsampler_counter_pg = 'd0;
|
|
|
|
reg sample_valid_la = 'd0;
|
|
reg adc_valid_d1 = 'd0;
|
|
reg adc_valid_d2 = 'd0;
|
|
|
|
reg [15:0] io_selection; // 1 - input, 0 - output
|
|
|
|
// internal signals
|
|
|
|
wire up_clk;
|
|
wire up_rstn;
|
|
wire [ 4:0] up_waddr;
|
|
wire [31:0] up_wdata;
|
|
wire up_wack;
|
|
wire up_wreq;
|
|
wire up_rack;
|
|
wire [31:0] up_rdata;
|
|
wire up_rreq;
|
|
wire [ 4:0] up_raddr;
|
|
|
|
wire reset;
|
|
|
|
wire [31:0] divider_counter_la;
|
|
wire [31:0] divider_counter_pg;
|
|
|
|
wire [17:0] edge_detect_enable;
|
|
wire [17:0] rise_edge_enable;
|
|
wire [17:0] fall_edge_enable;
|
|
wire [17:0] low_level_enable;
|
|
wire [17:0] high_level_enable;
|
|
wire [31:0] trigger_delay;
|
|
wire trigger_logic; // 0-OR,1-AND,2-XOR,3-NOR,4-NAND,5-NXOR
|
|
wire clock_select;
|
|
wire [15:0] overwrite_enable;
|
|
wire [15:0] overwrite_data;
|
|
|
|
wire [15:0] io_selection_s; // 1 - input, 0 - output
|
|
wire [15:0] od_pp_n; // 0 - push/pull, 1 - open drain
|
|
|
|
genvar i;
|
|
|
|
// signal name changes
|
|
|
|
assign up_clk = s_axi_aclk;
|
|
assign up_rstn = s_axi_aresetn;
|
|
|
|
assign trigger_offset = trigger_delay;
|
|
|
|
generate
|
|
for (i = 0 ; i < 16; i = i + 1) begin
|
|
assign data_t[i] = od_pp_n[i] ? io_selection[i] & !data_o[i] : io_selection[i];
|
|
always @(posedge clk_out) begin
|
|
data_o[i] <= overwrite_enable[i] ? overwrite_data[i] : data_r[i];
|
|
end
|
|
always @(posedge clk_out) begin
|
|
if(dac_valid == 1'b1) begin
|
|
data_r[i] <= dac_data[i];
|
|
end
|
|
if (io_selection_s[i] == 1'b1) begin
|
|
io_selection[i] <= 1'b1;
|
|
end else begin
|
|
if(dac_valid == 1'b1 || overwrite_data[i] == 1'b1) begin
|
|
io_selection[i] <= 1'b0;
|
|
end
|
|
end
|
|
end
|
|
end
|
|
endgenerate
|
|
|
|
BUFGMUX_CTRL BUFGMUX_CTRL_inst (
|
|
.O (clk_out),
|
|
.I0 (clk),
|
|
.I1 (data_i[0]),
|
|
.S (clock_select));
|
|
|
|
// synchronization
|
|
|
|
always @(posedge clk_out) begin
|
|
data_m1 <= data_i;
|
|
trigger_m1 <= trigger_i;
|
|
trigger_m2 <= trigger_m1;
|
|
end
|
|
|
|
// transfer data at clock frequency
|
|
// if capture is enabled
|
|
|
|
always @(posedge clk_out) begin
|
|
adc_valid_d1 <= adc_valid_d2;
|
|
adc_valid <= adc_valid_d1;
|
|
if (sample_valid_la == 1'b1) begin
|
|
adc_data <= data_m1;
|
|
adc_valid_d2 <= 1'b1;
|
|
end else begin
|
|
adc_valid_d2 <= 1'b0;
|
|
end
|
|
end
|
|
|
|
// downsampler logic analyzer
|
|
|
|
always @(posedge clk_out) begin
|
|
if (reset == 1'b1) begin
|
|
sample_valid_la <= 1'b0;
|
|
downsampler_counter_la <= 32'h0;
|
|
end else begin
|
|
if (downsampler_counter_la < divider_counter_la ) begin
|
|
downsampler_counter_la <= downsampler_counter_la + 1;
|
|
sample_valid_la <= 1'b0;
|
|
end else begin
|
|
downsampler_counter_la <= 32'h0;
|
|
sample_valid_la <= 1'b1;
|
|
end
|
|
end
|
|
end
|
|
|
|
// upsampler pattern generator
|
|
|
|
always @(posedge clk_out) begin
|
|
if (reset == 1'b1) begin
|
|
upsampler_counter_pg <= 32'h0;
|
|
dac_read <= 1'b0;
|
|
end else begin
|
|
dac_read <= 1'b0;
|
|
if (upsampler_counter_pg < divider_counter_pg) begin
|
|
upsampler_counter_pg <= upsampler_counter_pg + 1;
|
|
end else begin
|
|
upsampler_counter_pg <= 32'h0;
|
|
dac_read <= 1'b1;
|
|
end
|
|
end
|
|
end
|
|
|
|
|
|
axi_logic_analyzer_trigger i_trigger (
|
|
.clk (clk_out),
|
|
.reset (reset),
|
|
|
|
.data (adc_data),
|
|
.data_valid(sample_valid_la),
|
|
.trigger (trigger_m2),
|
|
|
|
.edge_detect_enable (edge_detect_enable),
|
|
.rise_edge_enable (rise_edge_enable),
|
|
.fall_edge_enable (fall_edge_enable),
|
|
.low_level_enable (low_level_enable),
|
|
.high_level_enable (high_level_enable),
|
|
.trigger_logic (trigger_logic),
|
|
.trigger_out (trigger_out));
|
|
|
|
axi_logic_analyzer_reg i_registers (
|
|
|
|
.clk (clk_out),
|
|
.reset (reset),
|
|
|
|
.divider_counter_la (divider_counter_la),
|
|
.divider_counter_pg (divider_counter_pg),
|
|
.io_selection (io_selection_s),
|
|
|
|
.edge_detect_enable (edge_detect_enable),
|
|
.rise_edge_enable (rise_edge_enable),
|
|
.fall_edge_enable (fall_edge_enable),
|
|
.low_level_enable (low_level_enable),
|
|
.high_level_enable (high_level_enable),
|
|
.trigger_delay (trigger_delay),
|
|
.trigger_logic (trigger_logic),
|
|
.clock_select (clock_select),
|
|
.overwrite_enable (overwrite_enable),
|
|
.overwrite_data (overwrite_data),
|
|
.input_data (adc_data),
|
|
.od_pp_n (od_pp_n),
|
|
|
|
// bus interface
|
|
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_wreq (up_wreq),
|
|
.up_waddr (up_waddr),
|
|
.up_wdata (up_wdata),
|
|
.up_wack (up_wack),
|
|
.up_rreq (up_rreq),
|
|
.up_raddr (up_raddr),
|
|
.up_rdata (up_rdata),
|
|
.up_rack (up_rack));
|
|
|
|
// axi interface
|
|
|
|
up_axi #(
|
|
.AXI_ADDRESS_WIDTH(7),
|
|
.ADDRESS_WIDTH(5)
|
|
) i_up_axi (
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_axi_awvalid (s_axi_awvalid),
|
|
.up_axi_awaddr (s_axi_awaddr),
|
|
.up_axi_awready (s_axi_awready),
|
|
.up_axi_wvalid (s_axi_wvalid),
|
|
.up_axi_wdata (s_axi_wdata),
|
|
.up_axi_wstrb (s_axi_wstrb),
|
|
.up_axi_wready (s_axi_wready),
|
|
.up_axi_bvalid (s_axi_bvalid),
|
|
.up_axi_bresp (s_axi_bresp),
|
|
.up_axi_bready (s_axi_bready),
|
|
.up_axi_arvalid (s_axi_arvalid),
|
|
.up_axi_araddr (s_axi_araddr),
|
|
.up_axi_arready (s_axi_arready),
|
|
.up_axi_rvalid (s_axi_rvalid),
|
|
.up_axi_rresp (s_axi_rresp),
|
|
.up_axi_rdata (s_axi_rdata),
|
|
.up_axi_rready (s_axi_rready),
|
|
.up_wreq (up_wreq),
|
|
.up_waddr (up_waddr),
|
|
.up_wdata (up_wdata),
|
|
.up_wack (up_wack),
|
|
.up_rreq (up_rreq),
|
|
.up_raddr (up_raddr),
|
|
.up_rdata (up_rdata),
|
|
.up_rack (up_rack));
|
|
|
|
endmodule
|
|
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|