pluto_hdl_adi/projects/sidekiqz2/system_top.v

158 lines
4.7 KiB
Verilog
Executable File

// ***************************************************************************
// ***************************************************************************
// Copyright (C) 2018-2023 Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module system_top (
inout [14:0] ddr_addr,
inout [ 2:0] ddr_ba,
inout ddr_cas_n,
inout ddr_ck_n,
inout ddr_ck_p,
inout ddr_cke,
inout ddr_cs_n,
inout [ 1:0] ddr_dm,
inout [15:0] ddr_dq,
inout [ 1:0] ddr_dqs_n,
inout [ 1:0] ddr_dqs_p,
inout ddr_odt,
inout ddr_ras_n,
inout ddr_reset_n,
inout ddr_we_n,
inout fixed_io_ddr_vrn,
inout fixed_io_ddr_vrp,
inout [31:0] fixed_io_mio,
inout fixed_io_ps_clk,
inout fixed_io_ps_porb,
inout fixed_io_ps_srstb,
inout iic_scl,
inout iic_sda,
input rx_clk_in,
input rx_frame_in,
input [11:0] rx_data_in,
output tx_clk_out,
output tx_frame_out,
output [11:0] tx_data_out,
output enable,
output txnrx,
input clk_out,
inout gpio_en_agc,
inout [ 3:0] gpio_ctl,
inout [ 7:0] gpio_status,
inout [ 4:1] pl_gpio,
output spi_csn,
output spi_clk,
output spi_mosi,
input spi_miso
);
// internal signals
wire [18:0] gpio_i;
wire [18:0] gpio_o;
wire [18:0] gpio_t;
// instantiations
ad_iobuf #(
.DATA_WIDTH(17)
) i_iobuf (
.dio_t (gpio_t[16:0]),
.dio_i (gpio_o[16:0]),
.dio_o (gpio_i[16:0]),
.dio_p ({ pl_gpio, // 16:13
gpio_en_agc, // 12:12
gpio_ctl, // 11: 8
gpio_status})); // 7: 0
assign gpio_i[18:17] = gpio_o[18:17];
system_wrapper i_system_wrapper (
.ddr_addr (ddr_addr),
.ddr_ba (ddr_ba),
.ddr_cas_n (ddr_cas_n),
.ddr_ck_n (ddr_ck_n),
.ddr_ck_p (ddr_ck_p),
.ddr_cke (ddr_cke),
.ddr_cs_n (ddr_cs_n),
.ddr_dm (ddr_dm),
.ddr_dq (ddr_dq),
.ddr_dqs_n (ddr_dqs_n),
.ddr_dqs_p (ddr_dqs_p),
.ddr_odt (ddr_odt),
.ddr_ras_n (ddr_ras_n),
.ddr_reset_n (ddr_reset_n),
.ddr_we_n (ddr_we_n),
.enable (enable),
.fixed_io_ddr_vrn (fixed_io_ddr_vrn),
.fixed_io_ddr_vrp (fixed_io_ddr_vrp),
.fixed_io_mio (fixed_io_mio),
.fixed_io_ps_clk (fixed_io_ps_clk),
.fixed_io_ps_porb (fixed_io_ps_porb),
.fixed_io_ps_srstb (fixed_io_ps_srstb),
.gpio_i (gpio_i),
.gpio_o (gpio_o),
.gpio_t (gpio_t),
.iic_main_scl_io (iic_scl),
.iic_main_sda_io (iic_sda),
.rx_clk_in (rx_clk_in),
.rx_data_in (rx_data_in),
.rx_frame_in (rx_frame_in),
.spi0_clk_i (1'b0),
.spi0_clk_o (spi_clk),
.spi0_csn_0_o (spi_csn),
.spi0_csn_1_o (),
.spi0_csn_2_o (),
.spi0_csn_i (1'b1),
.spi0_sdi_i (spi_miso),
.spi0_sdo_i (1'b0),
.spi0_sdo_o (spi_mosi),
.tx_clk_out (tx_clk_out),
.tx_data_out (tx_data_out),
.tx_frame_out (tx_frame_out),
.txnrx (txnrx),
.up_enable (gpio_o[17]),
.up_txnrx (gpio_o[18]));
endmodule