pluto_hdl_adi/library/axi_dmac/src_axi_stream.v

106 lines
3.2 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
module dmac_src_axi_stream #(
parameter ID_WIDTH = 3,
parameter S_AXIS_DATA_WIDTH = 64,
parameter LENGTH_WIDTH = 24,
parameter BEATS_PER_BURST_WIDTH = 4)(
input s_axis_aclk,
input s_axis_aresetn,
input enable,
output enabled,
input [ID_WIDTH-1:0] request_id,
output [ID_WIDTH-1:0] response_id,
input eot,
output s_axis_ready,
input s_axis_valid,
input [S_AXIS_DATA_WIDTH-1:0] s_axis_data,
input [0:0] s_axis_user,
input s_axis_last,
output s_axis_xfer_req,
output fifo_valid,
output [S_AXIS_DATA_WIDTH-1:0] fifo_data,
output fifo_last,
input req_valid,
output req_ready,
input [BEATS_PER_BURST_WIDTH-1:0] req_last_burst_length,
input req_sync_transfer_start,
input req_xlast
);
assign enabled = enable;
dmac_data_mover # (
.ID_WIDTH(ID_WIDTH),
.DATA_WIDTH(S_AXIS_DATA_WIDTH),
.BEATS_PER_BURST_WIDTH(BEATS_PER_BURST_WIDTH),
.ALLOW_ABORT(1)
) i_data_mover (
.clk(s_axis_aclk),
.resetn(s_axis_aresetn),
.xfer_req(s_axis_xfer_req),
.request_id(request_id),
.response_id(response_id),
.eot(eot),
.req_valid(req_valid),
.req_ready(req_ready),
.req_last_burst_length(req_last_burst_length),
.req_sync_transfer_start(req_sync_transfer_start),
.req_xlast(req_xlast),
.s_axi_valid(s_axis_valid),
.s_axi_ready(s_axis_ready),
.s_axi_data(s_axis_data),
.s_axi_last(s_axis_last),
.s_axi_sync(s_axis_user[0]),
.m_axi_valid(fifo_valid),
.m_axi_data(fifo_data),
.m_axi_last(fifo_last)
);
endmodule