pluto_hdl_adi/library/axi_dmac/axi_register_slice.v

136 lines
4.1 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_register_slice #(
parameter DATA_WIDTH = 32,
parameter FORWARD_REGISTERED = 0,
parameter BACKWARD_REGISTERED = 0
) (
input clk,
input resetn,
input s_axi_valid,
output s_axi_ready,
input [DATA_WIDTH-1:0] s_axi_data,
output m_axi_valid,
input m_axi_ready,
output [DATA_WIDTH-1:0] m_axi_data
);
/*
s_axi_data -> bwd_data -> fwd_data(1) -> m_axi_data
s_axi_valid -> bwd_valid -> fwd_valid(1) -> m_axi_valid
s_axi_ready <- bwd_ready(2) <- fwd_ready <- m_axi_ready
(1) FORWARD_REGISTERED inserts a set of FF before m_axi_data and m_axi_valid
(2) BACKWARD_REGISTERED insters a FF before s_axi_ready
*/
wire [DATA_WIDTH-1:0] bwd_data_s;
wire bwd_valid_s;
wire bwd_ready_s;
wire [DATA_WIDTH-1:0] fwd_data_s;
wire fwd_valid_s;
wire fwd_ready_s;
generate if (FORWARD_REGISTERED == 1) begin
reg fwd_valid = 1'b0;
reg [DATA_WIDTH-1:0] fwd_data = 'h00;
assign fwd_ready_s = ~fwd_valid | m_axi_ready;
assign fwd_valid_s = fwd_valid;
assign fwd_data_s = fwd_data;
always @(posedge clk) begin
if (~fwd_valid | m_axi_ready)
fwd_data <= bwd_data_s;
end
always @(posedge clk) begin
if (resetn == 1'b0) begin
fwd_valid <= 1'b0;
end else begin
if (bwd_valid_s)
fwd_valid <= 1'b1;
else if (m_axi_ready)
fwd_valid <= 1'b0;
end
end
end else begin
assign fwd_data_s = bwd_data_s;
assign fwd_valid_s = bwd_valid_s;
assign fwd_ready_s = m_axi_ready;
end
endgenerate
generate if (BACKWARD_REGISTERED == 1) begin
reg bwd_ready = 1'b1;
reg [DATA_WIDTH-1:0] bwd_data = 'h00;
assign bwd_valid_s = ~bwd_ready | s_axi_valid;
assign bwd_data_s = bwd_ready ? s_axi_data : bwd_data;
assign bwd_ready_s = bwd_ready;
always @(posedge clk) begin
if (bwd_ready)
bwd_data <= s_axi_data;
end
always @(posedge clk) begin
if (resetn == 1'b0) begin
bwd_ready <= 1'b1;
end else begin
if (fwd_ready_s)
bwd_ready <= 1'b1;
else if (s_axi_valid)
bwd_ready <= 1'b0;
end
end
end else begin
assign bwd_valid_s = s_axi_valid;
assign bwd_data_s = s_axi_data;
assign bwd_ready_s = fwd_ready_s;
end endgenerate
assign m_axi_data = fwd_data_s;
assign m_axi_valid = fwd_valid_s;
assign s_axi_ready = bwd_ready_s;
endmodule