279 lines
7.9 KiB
Verilog
Executable File
279 lines
7.9 KiB
Verilog
Executable File
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2014 - 2023 (c) Analog Devices, Inc. All rights reserved.
|
|
//
|
|
// In this HDL repository, there are many different and unique modules, consisting
|
|
// of various HDL (Verilog or VHDL) components. The individual modules are
|
|
// developed independently, and may be accompanied by separate and unique license
|
|
// terms.
|
|
//
|
|
// The user should read each of these license terms, and understand the
|
|
// freedoms and responsibilities that he or she has by using this source/core.
|
|
//
|
|
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
// A PARTICULAR PURPOSE.
|
|
//
|
|
// Redistribution and use of source or resulting binaries, with or without modification
|
|
// of this file, are permitted under one of the following two license terms:
|
|
//
|
|
// 1. The GNU General Public License version 2 as published by the
|
|
// Free Software Foundation, which can be found in the top level directory
|
|
// of this repository (LICENSE_GPL2), and also online at:
|
|
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
|
|
//
|
|
// OR
|
|
//
|
|
// 2. An ADI specific BSD license, which can be found in the top level directory
|
|
// of this repository (LICENSE_ADIBSD), and also on-line at:
|
|
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
|
|
// This will allow to generate bit files and not release the source code,
|
|
// as long as it attaches to an ADI device.
|
|
//
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module ad_data_out #(
|
|
|
|
parameter FPGA_TECHNOLOGY = 0,
|
|
parameter SINGLE_ENDED = 0,
|
|
parameter IDDR_CLK_EDGE ="SAME_EDGE",
|
|
// for 7 series devices
|
|
parameter ODELAY_TYPE = "VAR_LOAD",
|
|
// for ultrascale devices
|
|
parameter DELAY_FORMAT = "COUNT",
|
|
parameter US_DELAY_TYPE = "VAR_LOAD",
|
|
// for all
|
|
parameter IODELAY_ENABLE = 0,
|
|
parameter IODELAY_CTRL = 0,
|
|
parameter IODELAY_GROUP = "dev_if_delay_group",
|
|
parameter REFCLK_FREQUENCY = 200
|
|
) (
|
|
|
|
// data interface
|
|
|
|
input tx_clk,
|
|
input tx_data_p,
|
|
input tx_data_n,
|
|
output tx_data_out_p,
|
|
output tx_data_out_n,
|
|
|
|
// delay-data interface
|
|
|
|
input up_clk,
|
|
input up_dld,
|
|
input [ 4:0] up_dwdata,
|
|
output [ 4:0] up_drdata,
|
|
|
|
// delay-cntrl interface
|
|
|
|
input delay_clk,
|
|
input delay_rst,
|
|
output delay_locked
|
|
);
|
|
|
|
localparam NONE = -1;
|
|
localparam SEVEN_SERIES = 1;
|
|
localparam ULTRASCALE = 2;
|
|
localparam ULTRASCALE_PLUS = 3;
|
|
|
|
// do not instantiate an IDELAYCTRL if no ODELAY is instantiated
|
|
localparam IODELAY_CTRL_ENABLED = (IODELAY_ENABLE & IODELAY_CTRL);
|
|
localparam IODELAY_CTRL_SIM_DEVICE = (FPGA_TECHNOLOGY == ULTRASCALE_PLUS) ? "ULTRASCALE" :
|
|
(FPGA_TECHNOLOGY == ULTRASCALE) ? "ULTRASCALE" : "7SERIES";
|
|
|
|
localparam IODELAY_SIM_DEVICE = (FPGA_TECHNOLOGY == ULTRASCALE_PLUS) ? "ULTRASCALE_PLUS" :
|
|
(FPGA_TECHNOLOGY == ULTRASCALE) ? "ULTRASCALE" : "7SERIES";
|
|
|
|
/*
|
|
* For 7 series, IDELAYCTRL is enabled ALWAYS, meaning in the following situations:
|
|
* when ODELAY_TYPE = FIXED
|
|
* when ODELAY_TYPE = VARIABLE
|
|
* when ODELAY_TYPE = VAR_LOAD
|
|
**/
|
|
|
|
/*
|
|
* For UltraScale/UltraScale+:
|
|
* when DELAY_FORMAT = TIME:
|
|
* IDELAYCTRL must be used
|
|
* REFCLK_FREQUENCY must reflect the clock frequency of REF_CLK applied to
|
|
the IDELAYCTRL component
|
|
* DELAY_VALUE attribute represents an amount in ps
|
|
* The total delay through the IDELAYE3 is the align delay + DELAY_VALUE
|
|
* EN_VTC depends on DELAY_TYPE attribute:
|
|
* when FIXED mode: EN_VTC = 1
|
|
* It must be actively manipulated when the delay line is used in
|
|
VARIABLE or VAR_LOAD mode
|
|
(this section is NOT IMPLEMENTED! More details in UG571, DELAY_TYPE = VAR_LOAD mode and VARIABLE mode)
|
|
|
|
* when DELAY_FORMAT = COUNT:
|
|
* DO NOT use an IDELAYCTRL
|
|
* REFCLK_FREQUENCY must be set to default frequency (300MHz)
|
|
* Delay line represents an amount of taps (512 taps available)
|
|
* CNTVALUEIN/OUT[8:0] values represent the amount of taps the delay line
|
|
is set to
|
|
* EN_VTC = 0
|
|
**/
|
|
|
|
// internal signals
|
|
|
|
wire tx_data_oddr_s;
|
|
wire tx_data_odelay_s;
|
|
|
|
// internal registers
|
|
|
|
reg en_vtc;
|
|
|
|
// determine EN_VTC (VAR_LOAD and VARIABLE modes not implemented as in UG571)
|
|
|
|
always @(posedge tx_clk) begin
|
|
if (DELAY_FORMAT == "TIME") begin
|
|
if (US_DELAY_TYPE == "FIXED") begin
|
|
en_vtc <= 1'b1;
|
|
end else begin // "VAR_LOAD", "VARIABLE"
|
|
en_vtc <= ~up_dld;
|
|
end
|
|
end else begin // "COUNT"
|
|
en_vtc <= 1'b0;
|
|
end
|
|
end
|
|
|
|
// delay controller
|
|
|
|
generate
|
|
if (IODELAY_CTRL_ENABLED == 0) begin
|
|
assign delay_locked = 1'b1;
|
|
end else begin
|
|
(* IODELAY_GROUP = IODELAY_GROUP *)
|
|
IDELAYCTRL #(
|
|
.SIM_DEVICE (IODELAY_CTRL_SIM_DEVICE)
|
|
) i_delay_ctrl (
|
|
.RST (delay_rst),
|
|
.REFCLK (delay_clk),
|
|
.RDY (delay_locked));
|
|
end
|
|
endgenerate
|
|
|
|
// bypass ODELAY
|
|
|
|
generate
|
|
if (IODELAY_ENABLE == 0) begin
|
|
assign tx_data_odelay_s = tx_data_oddr_s;
|
|
assign up_drdata = 5'd0;
|
|
end
|
|
endgenerate
|
|
|
|
// transmit data interface, oddr -> odelay -> obuf
|
|
|
|
// oddr
|
|
|
|
generate
|
|
if ((FPGA_TECHNOLOGY == ULTRASCALE) || (FPGA_TECHNOLOGY == ULTRASCALE_PLUS)) begin
|
|
ODDRE1 #(
|
|
.SIM_DEVICE (IODELAY_SIM_DEVICE)
|
|
) i_tx_data_oddr (
|
|
.SR (1'b0),
|
|
.C (tx_clk),
|
|
.D1 (tx_data_n),
|
|
.D2 (tx_data_p),
|
|
.Q (tx_data_oddr_s));
|
|
end
|
|
endgenerate
|
|
|
|
generate
|
|
if (FPGA_TECHNOLOGY == SEVEN_SERIES) begin
|
|
ODDR #(
|
|
.DDR_CLK_EDGE (IDDR_CLK_EDGE)
|
|
) i_tx_data_oddr (
|
|
.CE (1'b1),
|
|
.R (1'b0),
|
|
.S (1'b0),
|
|
.C (tx_clk),
|
|
.D1 (tx_data_n),
|
|
.D2 (tx_data_p),
|
|
.Q (tx_data_oddr_s));
|
|
end
|
|
endgenerate
|
|
|
|
// odelay
|
|
|
|
generate
|
|
if (FPGA_TECHNOLOGY == SEVEN_SERIES && IODELAY_ENABLE == 1) begin
|
|
(* IODELAY_GROUP = IODELAY_GROUP *)
|
|
ODELAYE2 #(
|
|
.CINVCTRL_SEL ("FALSE"),
|
|
.DELAY_SRC ("ODATAIN"),
|
|
.HIGH_PERFORMANCE_MODE ("FALSE"),
|
|
.ODELAY_TYPE (ODELAY_TYPE),
|
|
.ODELAY_VALUE (0),
|
|
.REFCLK_FREQUENCY (REFCLK_FREQUENCY),
|
|
.PIPE_SEL ("FALSE"),
|
|
.SIGNAL_PATTERN ("DATA")
|
|
) i_tx_data_odelay (
|
|
.CE (1'b0),
|
|
.CLKIN (1'b0),
|
|
.INC (1'b0),
|
|
.LDPIPEEN (1'b0),
|
|
.CINVCTRL (1'b0),
|
|
.REGRST (1'b0),
|
|
.C (up_clk),
|
|
.ODATAIN (tx_data_oddr_s),
|
|
.DATAOUT (tx_data_odelay_s),
|
|
.LD (up_dld),
|
|
.CNTVALUEIN (up_dwdata),
|
|
.CNTVALUEOUT (up_drdata));
|
|
end
|
|
endgenerate
|
|
|
|
generate
|
|
if ((FPGA_TECHNOLOGY == ULTRASCALE_PLUS || FPGA_TECHNOLOGY == ULTRASCALE)
|
|
&& (IODELAY_ENABLE == 1)) begin
|
|
|
|
(* IODELAY_GROUP = IODELAY_GROUP *)
|
|
ODELAYE3 #(
|
|
.CASCADE ("NONE"),
|
|
.DELAY_FORMAT (DELAY_FORMAT),
|
|
.DELAY_TYPE (US_DELAY_TYPE),
|
|
.DELAY_VALUE (0),
|
|
.IS_CLK_INVERTED (1'b0),
|
|
.IS_RST_INVERTED (1'b0),
|
|
.REFCLK_FREQUENCY (REFCLK_FREQUENCY),
|
|
.SIM_DEVICE (IODELAY_SIM_DEVICE),
|
|
.UPDATE_MODE ("ASYNC")
|
|
) i_tx_data_odelay (
|
|
.CASC_RETURN (1'b0),
|
|
.CASC_IN (1'b0),
|
|
.CASC_OUT (),
|
|
.CE (1'b0),
|
|
.CLK (up_clk),
|
|
.INC (1'b0),
|
|
.LOAD (up_dld),
|
|
.CNTVALUEIN (up_dwdata),
|
|
.CNTVALUEOUT (up_drdata),
|
|
.ODATAIN (tx_data_oddr_s),
|
|
.DATAOUT (tx_data_odelay_s),
|
|
.RST (1'b0),
|
|
.EN_VTC (en_vtc));
|
|
end
|
|
endgenerate
|
|
|
|
// obuf
|
|
|
|
generate
|
|
if (SINGLE_ENDED == 1) begin
|
|
assign tx_data_out_n = 1'b0;
|
|
OBUF i_tx_data_obuf (
|
|
.I (tx_data_odelay_s),
|
|
.O (tx_data_out_p));
|
|
end else begin
|
|
OBUFDS i_tx_data_obuf (
|
|
.I (tx_data_odelay_s),
|
|
.O (tx_data_out_p),
|
|
.OB (tx_data_out_n));
|
|
end
|
|
endgenerate
|
|
|
|
endmodule
|