pluto_hdl_adi/library/axi_adrv9001/adrv9001_aligner8.v

91 lines
3.1 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2020 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module adrv9001_aligner8 (
input clk,
input [7:0] idata,
input ivalid,
input [7:0] strobe,
output reg [7:0] odata,
output ovalid
);
reg [7:0] idata_d = 'b0;
reg ivalid_d = 'b0;
always @(posedge clk) begin
if (ivalid) begin
idata_d <= idata;
end
ivalid_d <= ivalid;
end
reg [2:0] phase = 'h0;
always @(posedge clk) begin
if (ivalid) begin
if ((strobe != 'b1111_1111) && (strobe != 'b0000_0000)) begin
casex (strobe)
'b1xxx_xxxx : phase <= 0;
'b01xx_xxxx : phase <= 1;
'b001x_xxxx : phase <= 2;
'b0001_xxxx : phase <= 3;
'b0000_1xxx : phase <= 4;
'b0000_01xx : phase <= 5;
'b0000_001x : phase <= 6;
'b0000_0001 : phase <= 7;
default : phase <= phase;
endcase
end
end
end
always @(posedge clk) begin
case (phase)
0 : odata <= idata_d;
1 : odata <= {idata_d[6:0],idata[7:7]};
2 : odata <= {idata_d[5:0],idata[7:6]};
3 : odata <= {idata_d[4:0],idata[7:5]};
4 : odata <= {idata_d[3:0],idata[7:4]};
5 : odata <= {idata_d[2:0],idata[7:3]};
6 : odata <= {idata_d[1:0],idata[7:2]};
7 : odata <= {idata_d[0:0],idata[7:1]};
endcase
end
assign ovalid = ivalid_d;
endmodule