pluto_hdl_adi/library/axi_dmac/dest_fifo_inf.v

153 lines
3.9 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsabilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
module dmac_dest_fifo_inf #(
parameter ID_WIDTH = 3,
parameter DATA_WIDTH = 64,
parameter BEATS_PER_BURST_WIDTH = 4)(
input clk,
input resetn,
input enable,
output enabled,
input sync_id,
output sync_id_ret,
input [ID_WIDTH-1:0] request_id,
output [ID_WIDTH-1:0] response_id,
output [ID_WIDTH-1:0] data_id,
input data_eot,
input response_eot,
input en,
output [DATA_WIDTH-1:0] dout,
output valid,
output underflow,
output xfer_req,
output fifo_ready,
input fifo_valid,
input [DATA_WIDTH-1:0] fifo_data,
input req_valid,
output req_ready,
input [BEATS_PER_BURST_WIDTH-1:0] req_last_burst_length,
output response_valid,
input response_ready,
output response_resp_eot,
output [1:0] response_resp
);
assign sync_id_ret = sync_id;
wire data_enabled;
wire _fifo_ready;
assign fifo_ready = _fifo_ready | ~enabled;
reg en_d1;
wire data_ready;
wire data_valid;
always @(posedge clk)
begin
if (resetn == 1'b0) begin
en_d1 <= 1'b0;
end else begin
en_d1 <= en;
end
end
assign underflow = en_d1 & (~data_valid | ~enable);
assign data_ready = en_d1 & (data_valid | ~enable);
assign valid = en_d1 & data_valid & enable;
dmac_data_mover # (
.ID_WIDTH(ID_WIDTH),
.DATA_WIDTH(DATA_WIDTH),
.BEATS_PER_BURST_WIDTH(BEATS_PER_BURST_WIDTH),
.DISABLE_WAIT_FOR_ID(0)
) i_data_mover (
.clk(clk),
.resetn(resetn),
.enable(enable),
.enabled(data_enabled),
.sync_id(sync_id),
.xfer_req(xfer_req),
.request_id(request_id),
.response_id(data_id),
.eot(data_eot),
.req_valid(req_valid),
.req_ready(req_ready),
.req_last_burst_length(req_last_burst_length),
.s_axi_ready(_fifo_ready),
.s_axi_valid(fifo_valid),
.s_axi_data(fifo_data),
.m_axi_ready(data_ready),
.m_axi_valid(data_valid),
.m_axi_data(dout),
.m_axi_last()
);
dmac_response_generator # (
.ID_WIDTH(ID_WIDTH)
) i_response_generator (
.clk(clk),
.resetn(resetn),
.enable(data_enabled),
.enabled(enabled),
.sync_id(sync_id),
.request_id(data_id),
.response_id(response_id),
.eot(response_eot),
.resp_valid(response_valid),
.resp_ready(response_ready),
.resp_eot(response_resp_eot),
.resp_resp(response_resp)
);
endmodule