zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/common/up_adc_common.v

455 lines
14 KiB
Verilog
Raw Blame History

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module up_adc_common #(
// parameters
parameter ID = 0,
parameter CONFIG = 0,
parameter COMMON_ID = 6'h00,
parameter DRP_DISABLE = 0,
parameter USERPORTS_DISABLE = 0,
parameter GPIO_DISABLE = 0,
parameter START_CODE_DISABLE = 0) (
// clock reset
output mmcm_rst,
// adc interface
input adc_clk,
output adc_rst,
output adc_r1_mode,
output adc_ddr_edgesel,
output adc_pin_mode,
input adc_status,
input adc_sync_status,
input adc_status_ovf,
input [31:0] adc_clk_ratio,
output [31:0] adc_start_code,
output adc_sref_sync,
output adc_sync,
input [31:0] up_pps_rcounter,
input up_pps_status,
output reg up_pps_irq_mask,
// channel interface
output up_adc_ce,
input up_status_pn_err,
input up_status_pn_oos,
input up_status_or,
// drp interface
output up_drp_sel,
output up_drp_wr,
output [11:0] up_drp_addr,
output [31:0] up_drp_wdata,
input [31:0] up_drp_rdata,
input up_drp_ready,
input up_drp_locked,
// user channel control
output [ 7:0] up_usr_chanmax_out,
input [ 7:0] up_usr_chanmax_in,
input [31:0] up_adc_gpio_in,
output [31:0] up_adc_gpio_out,
// bus interface
input up_rstn,
input up_clk,
input up_wreq,
input [13:0] up_waddr,
input [31:0] up_wdata,
output up_wack,
input up_rreq,
input [13:0] up_raddr,
output [31:0] up_rdata,
output up_rack);
// parameters
localparam VERSION = 32'h000a0062;
// internal registers
reg up_adc_clk_enb_int = 'd1;
reg up_core_preset = 'd1;
reg up_mmcm_preset = 'd1;
reg up_wack_int = 'd0;
reg [31:0] up_scratch = 'd0;
reg up_adc_clk_enb = 'd0;
reg up_mmcm_resetn = 'd0;
reg up_resetn = 'd0;
reg up_adc_sync = 'd0;
reg up_adc_sref_sync = 'd0;
reg up_adc_r1_mode = 'd0;
reg up_adc_ddr_edgesel = 'd0;
reg up_adc_pin_mode = 'd0;
reg up_status_ovf = 'd0;
reg [ 7:0] up_usr_chanmax_int = 'd0;
reg [31:0] up_adc_start_code = 'd0;
reg [31:0] up_adc_gpio_out_int = 'd0;
reg [31:0] up_timer = 'd0;
reg up_rack_int = 'd0;
reg [31:0] up_rdata_int = 'd0;
// internal signals
wire up_wreq_s;
wire up_rreq_s;
wire up_status_s;
wire up_sync_status_s;
wire up_status_ovf_s;
wire up_cntrl_xfer_done_s;
wire [31:0] up_adc_clk_count_s;
wire up_drp_status_s;
wire up_drp_rwn_s;
wire [31:0] up_drp_rdata_hold_s;
// decode block select
assign up_wreq_s = (up_waddr[13:8] == COMMON_ID) ? up_wreq : 1'b0;
assign up_rreq_s = (up_raddr[13:8] == COMMON_ID) ? up_rreq : 1'b0;
// processor write interface
assign up_wack = up_wack_int;
assign up_adc_ce = up_adc_clk_enb_int;
always @(posedge up_clk) begin
if (up_rstn == 0) begin
up_adc_clk_enb_int <= 1'd1;
up_core_preset <= 1'd1;
up_mmcm_preset <= 1'd1;
up_wack_int <= 'd0;
up_scratch <= 'd0;
up_adc_clk_enb <= 'd0;
up_mmcm_resetn <= 'd0;
up_resetn <= 'd0;
up_adc_sync <= 'd0;
up_adc_sref_sync <= 'd0;
up_adc_r1_mode <= 'd0;
up_adc_ddr_edgesel <= 'd0;
up_adc_pin_mode <= 'd0;
up_pps_irq_mask <= 1'b1;
end else begin
up_adc_clk_enb_int <= ~up_adc_clk_enb;
up_core_preset <= ~up_resetn;
up_mmcm_preset <= ~up_mmcm_resetn;
up_wack_int <= up_wreq_s;
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h02)) begin
up_scratch <= up_wdata;
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h04)) begin
up_pps_irq_mask <= up_wdata[0];
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h10)) begin
up_adc_clk_enb <= up_wdata[2];
up_mmcm_resetn <= up_wdata[1];
up_resetn <= up_wdata[0];
end
if (up_adc_sync == 1'b1) begin
if (up_cntrl_xfer_done_s == 1'b1) begin
up_adc_sync <= 1'b0;
end
end else if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h11)) begin
up_adc_sync <= up_wdata[3];
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h11)) begin
up_adc_sref_sync <= up_wdata[4];
up_adc_r1_mode <= up_wdata[2];
up_adc_ddr_edgesel <= up_wdata[1];
up_adc_pin_mode <= up_wdata[0];
end
end
end
generate
if (DRP_DISABLE == 1) begin
assign up_drp_sel = 'd0;
assign up_drp_wr = 'd0;
assign up_drp_status_s = 'd0;
assign up_drp_rwn_s = 'd0;
assign up_drp_addr = 'd0;
assign up_drp_wdata = 'd0;
assign up_drp_rdata_hold_s = 'd0;
end else begin
reg up_drp_sel_int = 'd0;
reg up_drp_wr_int = 'd0;
reg up_drp_status_int = 'd0;
reg up_drp_rwn_int = 'd0;
reg [11:0] up_drp_addr_int = 'd0;
reg [31:0] up_drp_wdata_int = 'd0;
reg [31:0] up_drp_rdata_hold_int = 'd0;
always @(posedge up_clk) begin
if (up_rstn == 0) begin
up_drp_sel_int <= 'd0;
up_drp_wr_int <= 'd0;
up_drp_status_int <= 'd0;
up_drp_rwn_int <= 'd0;
up_drp_addr_int <= 'd0;
up_drp_wdata_int <= 'd0;
up_drp_rdata_hold_int <= 'd0;
end else begin
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h1c)) begin
up_drp_sel_int <= 1'b1;
up_drp_wr_int <= ~up_wdata[28];
end else begin
up_drp_sel_int <= 1'b0;
up_drp_wr_int <= 1'b0;
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h1c)) begin
up_drp_status_int <= 1'b1;
end else if (up_drp_ready == 1'b1) begin
up_drp_status_int <= 1'b0;
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h1c)) begin
up_drp_rwn_int <= up_wdata[28];
up_drp_addr_int <= up_wdata[27:16];
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h1e)) begin
up_drp_wdata_int <= up_wdata;
end
if (up_drp_ready == 1'b1) begin
up_drp_rdata_hold_int <= up_drp_rdata;
end
end
end
assign up_drp_sel = up_drp_sel_int;
assign up_drp_wr = up_drp_wr_int;
assign up_drp_status_s = up_drp_status_int;
assign up_drp_rwn_s = up_drp_rwn_int;
assign up_drp_addr = up_drp_addr_int;
assign up_drp_wdata = up_drp_wdata_int;
assign up_drp_rdata_hold_s = up_drp_rdata_hold_int;
end
endgenerate
always @(posedge up_clk) begin
if (up_rstn == 0) begin
up_status_ovf <= 'd0;
end else begin
if (up_status_ovf_s == 1'b1) begin
up_status_ovf <= 1'b1;
end else if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h22)) begin
up_status_ovf <= up_status_ovf & ~up_wdata[2];
end
end
end
assign up_usr_chanmax_out = up_usr_chanmax_int;
generate
if (USERPORTS_DISABLE == 1) begin
always @(posedge up_clk) begin
up_usr_chanmax_int <= 'd0;
end
end else begin
always @(posedge up_clk) begin
if (up_rstn == 0) begin
up_usr_chanmax_int <= 'd0;
end else begin
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h28)) begin
up_usr_chanmax_int <= up_wdata[7:0];
end
end
end
end
endgenerate
assign up_adc_gpio_out = up_adc_gpio_out_int;
generate
if (GPIO_DISABLE == 1) begin
always @(posedge up_clk) begin
up_adc_gpio_out_int <= 'd0;
end
end else begin
always @(posedge up_clk) begin
if (up_rstn == 0) begin
up_adc_gpio_out_int <= 'd0;
end else begin
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h2f)) begin
up_adc_gpio_out_int <= up_wdata;
end
end
end
end
endgenerate
generate
if (START_CODE_DISABLE == 1) begin
always @(posedge up_clk) begin
up_adc_start_code <= 'd0;
end
end else begin
always @(posedge up_clk) begin
if (up_rstn == 0) begin
up_adc_start_code <= 'd0;
end else begin
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h29)) begin
up_adc_start_code <= up_wdata[31:0];
end
end
end
end
endgenerate
// timer with premature termination
always @(posedge up_clk) begin
if (up_rstn == 0) begin
up_timer <= 32'd0;
end else begin
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h40)) begin
up_timer <= up_wdata;
end else if (up_timer > 0) begin
up_timer <= up_timer - 1'b1;
end
end
end
// processor read interface
assign up_rack = up_rack_int;
assign up_rdata = up_rdata_int;
always @(posedge up_clk) begin
if (up_rstn == 0) begin
up_rack_int <= 'd0;
up_rdata_int <= 'd0;
end else begin
up_rack_int <= up_rreq_s;
if (up_rreq_s == 1'b1) begin
case (up_raddr[7:0])
8'h00: up_rdata_int <= VERSION;
8'h01: up_rdata_int <= ID;
8'h02: up_rdata_int <= up_scratch;
8'h03: up_rdata_int <= CONFIG;
8'h04: up_rdata_int <= {31'b0, up_pps_irq_mask};
8'h10: up_rdata_int <= {29'd0, up_adc_clk_enb, up_mmcm_resetn, up_resetn};
8'h11: up_rdata_int <= {27'd0, up_adc_sref_sync, up_adc_sync, up_adc_r1_mode,
up_adc_ddr_edgesel, up_adc_pin_mode};
8'h15: up_rdata_int <= up_adc_clk_count_s;
8'h16: up_rdata_int <= adc_clk_ratio;
8'h17: up_rdata_int <= {28'd0, up_status_pn_err, up_status_pn_oos, up_status_or, up_status_s};
8'h1a: up_rdata_int <= {31'd0, up_sync_status_s};
8'h1c: up_rdata_int <= {3'd0, up_drp_rwn_s, up_drp_addr, 16'b0};
8'h1d: up_rdata_int <= {14'd0, up_drp_locked, up_drp_status_s, 16'b0};
8'h1e: up_rdata_int <= up_drp_wdata;
8'h1f: up_rdata_int <= up_drp_rdata_hold_s;
8'h22: up_rdata_int <= {29'd0, up_status_ovf, 2'b0};
8'h23: up_rdata_int <= 32'd8;
8'h28: up_rdata_int <= {24'd0, up_usr_chanmax_in};
8'h29: up_rdata_int <= up_adc_start_code;
8'h2e: up_rdata_int <= up_adc_gpio_in;
8'h2f: up_rdata_int <= up_adc_gpio_out_int;
8'h30: up_rdata_int <= up_pps_rcounter;
8'h31: up_rdata_int <= {31'b0, up_pps_status};
8'h40: up_rdata_int <= up_timer;
default: up_rdata_int <= 0;
endcase
end else begin
up_rdata_int <= 32'd0;
end
end
end
// resets
ad_rst i_mmcm_rst_reg (.preset(up_mmcm_preset), .clk(up_clk), .rst(mmcm_rst));
ad_rst i_core_rst_reg (.preset(up_core_preset), .clk(adc_clk), .rst(adc_rst));
// adc control & status
up_xfer_cntrl #(.DATA_WIDTH(37)) i_xfer_cntrl (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_data_cntrl ({ up_adc_sref_sync,
up_adc_sync,
up_adc_start_code,
up_adc_r1_mode,
up_adc_ddr_edgesel,
up_adc_pin_mode}),
.up_xfer_done (up_cntrl_xfer_done_s),
.d_rst (adc_rst),
.d_clk (adc_clk),
.d_data_cntrl ({ adc_sref_sync,
adc_sync,
adc_start_code,
adc_r1_mode,
adc_ddr_edgesel,
adc_pin_mode}));
up_xfer_status #(.DATA_WIDTH(3)) i_xfer_status (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_data_status ({up_sync_status_s,
up_status_s,
up_status_ovf_s}),
.d_rst (adc_rst),
.d_clk (adc_clk),
.d_data_status ({ adc_sync_status,
adc_status,
adc_status_ovf}));
// adc clock monitor
up_clock_mon i_clock_mon (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_d_count (up_adc_clk_count_s),
.d_rst (adc_rst),
.d_clk (adc_clk));
endmodule
// ***************************************************************************
// ***************************************************************************
Reference in New Issue View Git Blame Copy Permalink