pluto_hdl_adi/library/common/up_drp_cntrl.v

195 lines
6.3 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module up_drp_cntrl (
// drp interface
drp_clk,
drp_rst,
drp_sel,
drp_wr,
drp_addr,
drp_wdata,
drp_rdata,
drp_ready,
drp_locked,
// processor interface
up_rstn,
up_clk,
up_drp_sel_t,
up_drp_rwn,
up_drp_addr,
up_drp_wdata,
up_drp_rdata,
up_drp_status,
up_drp_locked);
// drp interface
input drp_clk;
input drp_rst;
output drp_sel;
output drp_wr;
output [11:0] drp_addr;
output [15:0] drp_wdata;
input [15:0] drp_rdata;
input drp_ready;
input drp_locked;
// processor interface
input up_rstn;
input up_clk;
input up_drp_sel_t;
input up_drp_rwn;
input [11:0] up_drp_addr;
input [15:0] up_drp_wdata;
output [15:0] up_drp_rdata;
output up_drp_status;
output up_drp_locked;
// internal registers
reg drp_sel_t_m1 = 'd0;
reg drp_sel_t_m2 = 'd0;
reg drp_sel_t_m3 = 'd0;
reg drp_sel = 'd0;
reg drp_wr = 'd0;
reg [11:0] drp_addr = 'd0;
reg [15:0] drp_wdata = 'd0;
reg drp_ready_int = 'd0;
reg [15:0] drp_rdata_int = 'd0;
reg drp_ack_t = 'd0;
reg up_drp_locked_m1 = 'd0;
reg up_drp_locked = 'd0;
reg up_drp_ack_t_m1 = 'd0;
reg up_drp_ack_t_m2 = 'd0;
reg up_drp_ack_t_m3 = 'd0;
reg up_drp_sel_t_d = 'd0;
reg up_drp_status = 'd0;
reg [15:0] up_drp_rdata = 'd0;
// internal signals
wire drp_sel_t_s;
wire up_drp_ack_t_s;
wire up_drp_sel_t_s;
// drp control and status
assign drp_sel_t_s = drp_sel_t_m2 ^ drp_sel_t_m3;
always @(posedge drp_clk) begin
if (drp_rst == 1'b1) begin
drp_sel_t_m1 <= 'd0;
drp_sel_t_m2 <= 'd0;
drp_sel_t_m3 <= 'd0;
end else begin
drp_sel_t_m1 <= up_drp_sel_t;
drp_sel_t_m2 <= drp_sel_t_m1;
drp_sel_t_m3 <= drp_sel_t_m2;
end
end
always @(posedge drp_clk) begin
if (drp_sel_t_s == 1'b1) begin
drp_sel <= 1'b1;
drp_wr <= ~up_drp_rwn;
drp_addr <= up_drp_addr;
drp_wdata <= up_drp_wdata;
end else begin
drp_sel <= 1'b0;
drp_wr <= 1'b0;
drp_addr <= 12'd0;
drp_wdata <= 16'd0;
end
end
always @(posedge drp_clk) begin
drp_ready_int <= drp_ready;
if ((drp_ready_int == 1'b0) && (drp_ready == 1'b1)) begin
drp_rdata_int <= drp_rdata;
drp_ack_t <= ~drp_ack_t;
end
end
// drp status transfer
assign up_drp_ack_t_s = up_drp_ack_t_m3 ^ up_drp_ack_t_m2;
assign up_drp_sel_t_s = up_drp_sel_t ^ up_drp_sel_t_d;
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 1'b0) begin
up_drp_locked_m1 <= 'd0;
up_drp_locked <= 'd0;
up_drp_ack_t_m1 <= 'd0;
up_drp_ack_t_m2 <= 'd0;
up_drp_ack_t_m3 <= 'd0;
up_drp_sel_t_d <= 'd0;
up_drp_status <= 'd0;
up_drp_rdata <= 'd0;
end else begin
up_drp_locked_m1 <= drp_locked;
up_drp_locked <= up_drp_locked_m1;
up_drp_ack_t_m1 <= drp_ack_t;
up_drp_ack_t_m2 <= up_drp_ack_t_m1;
up_drp_ack_t_m3 <= up_drp_ack_t_m2;
up_drp_sel_t_d <= up_drp_sel_t;
if (up_drp_ack_t_s == 1'b1) begin
up_drp_status <= 1'b0;
end else if (up_drp_sel_t_s == 1'b1) begin
up_drp_status <= 1'b1;
end
if (up_drp_ack_t_s == 1'b1) begin
up_drp_rdata <= drp_rdata_int;
end
end
end
endmodule
// ***************************************************************************
// ***************************************************************************