114 lines
3.9 KiB
Verilog
114 lines
3.9 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright (C) 2014-2023 Analog Devices, Inc. All rights reserved.
|
|
//
|
|
// In this HDL repository, there are many different and unique modules, consisting
|
|
// of various HDL (Verilog or VHDL) components. The individual modules are
|
|
// developed independently, and may be accompanied by separate and unique license
|
|
// terms.
|
|
//
|
|
// The user should read each of these license terms, and understand the
|
|
// freedoms and responsibilities that he or she has by using this source/core.
|
|
//
|
|
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
// A PARTICULAR PURPOSE.
|
|
//
|
|
// Redistribution and use of source or resulting binaries, with or without modification
|
|
// of this file, are permitted under one of the following two license terms:
|
|
//
|
|
// 1. The GNU General Public License version 2 as published by the
|
|
// Free Software Foundation, which can be found in the top level directory
|
|
// of this repository (LICENSE_GPL2), and also online at:
|
|
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
|
|
//
|
|
// OR
|
|
//
|
|
// 2. An ADI specific BSD license, which can be found in the top level directory
|
|
// of this repository (LICENSE_ADIBSD), and also on-line at:
|
|
// https://github.com/analogdevicesinc/hdl/blob/main/LICENSE_ADIBSD
|
|
// This will allow to generate bit files and not release the source code,
|
|
// as long as it attaches to an ADI device.
|
|
//
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module fmcadc2_spi (
|
|
|
|
input spi_adf4355,
|
|
input spi_adf4355_ce,
|
|
|
|
input spi_clk,
|
|
input [ 2:0] spi_csn,
|
|
input spi_mosi,
|
|
output spi_miso,
|
|
|
|
output spi_adc_csn,
|
|
output spi_adc_clk,
|
|
inout spi_adc_sdio,
|
|
|
|
output spi_adf4355_data_or_csn_0,
|
|
output spi_adf4355_clk_or_csn_1,
|
|
output spi_adf4355_le_or_clk,
|
|
inout spi_adf4355_ce_or_sdio
|
|
);
|
|
|
|
// internal registers
|
|
|
|
reg [ 5:0] spi_count = 'd0;
|
|
reg spi_rd_wr_n = 'd0;
|
|
reg spi_enable = 'd0;
|
|
|
|
// internal signals
|
|
|
|
wire spi_csn_s;
|
|
wire spi_enable_s;
|
|
|
|
// check on rising edge and change on falling edge
|
|
|
|
assign spi_csn_s = & spi_csn;
|
|
assign spi_enable_s = spi_enable & ~spi_csn_s;
|
|
|
|
always @(posedge spi_clk or posedge spi_csn_s) begin
|
|
if (spi_csn_s == 1'b1) begin
|
|
spi_count <= 6'd0;
|
|
spi_rd_wr_n <= 1'd0;
|
|
end else begin
|
|
spi_count <= (spi_count < 6'h3f) ? spi_count + 1'b1 : spi_count;
|
|
if (spi_count == 6'd0) begin
|
|
spi_rd_wr_n <= spi_mosi;
|
|
end
|
|
end
|
|
end
|
|
|
|
always @(negedge spi_clk or posedge spi_csn_s) begin
|
|
if (spi_csn_s == 1'b1) begin
|
|
spi_enable <= 1'b0;
|
|
end else begin
|
|
if (spi_count == 6'd16) begin
|
|
spi_enable <= spi_rd_wr_n;
|
|
end
|
|
end
|
|
end
|
|
|
|
assign spi_miso = ((spi_adc_sdio & ~spi_csn[0]) | (~spi_adf4355 &
|
|
spi_adf4355_ce_or_sdio & ~(spi_csn[1] & spi_csn[2])));
|
|
|
|
// adc interface (3 wire)
|
|
|
|
assign spi_adc_csn = spi_csn[0];
|
|
assign spi_adc_clk = spi_clk;
|
|
assign spi_adc_sdio = (spi_enable_s == 1'b0) ? spi_mosi : 1'bz;
|
|
|
|
// adf4355 or normal (AMP/EXT)
|
|
|
|
assign spi_adf4355_data_or_csn_0 = (spi_adf4355 == 1'b1) ? spi_mosi : spi_csn[1];
|
|
assign spi_adf4355_clk_or_csn_1 = (spi_adf4355 == 1'b1) ? spi_clk : spi_csn[2];
|
|
assign spi_adf4355_le_or_clk = (spi_adf4355 == 1'b1) ? spi_csn[1] : spi_clk;
|
|
assign spi_adf4355_ce_or_sdio = (spi_adf4355 == 1'b1) ? spi_adf4355_ce :
|
|
((spi_enable_s == 1'b0) ? spi_mosi : 1'bz);
|
|
|
|
endmodule
|