Lars-Peter Clausen 3fd830b038 fmcomms2: Use AXI3 interface for the DMA on ZYNQ ... On ZYNQ the HP interconnects have a AXI3 interface. The DMA controller supports both AXI4 and AXI3. By switching to AXI3 there is no need to create a protocol converter between the DMA and the HP port. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>		2015-04-17 19:51:37 +02:00
..
ac701	Makefile: Added top level Makefile. Modified behavior of clean and clean-all	2015-04-17 17:22:38 +03:00
c5soc	Makefile: Added top level Makefile. Modified behavior of clean and clean-all	2015-04-17 17:22:38 +03:00
common	fmcomms2: Use AXI3 interface for the DMA on ZYNQ	2015-04-17 19:51:37 +02:00
kc705	Makefile: Added top level Makefile. Modified behavior of clean and clean-all	2015-04-17 17:22:38 +03:00
mitx045	Makefile: Added top level Makefile. Modified behavior of clean and clean-all	2015-04-17 17:22:38 +03:00
rfsom	Makefile: Added top level Makefile. Modified behavior of clean and clean-all	2015-04-17 17:22:38 +03:00
vc707	Makefile: Added top level Makefile. Modified behavior of clean and clean-all	2015-04-17 17:22:38 +03:00
zc702	Makefile: Added top level Makefile. Modified behavior of clean and clean-all	2015-04-17 17:22:38 +03:00
zc706	Makefile: Added top level Makefile. Modified behavior of clean and clean-all	2015-04-17 17:22:38 +03:00
zed	Makefile: Added top level Makefile. Modified behavior of clean and clean-all	2015-04-17 17:22:38 +03:00
Makefile	Makefile: Added top level Makefile. Modified behavior of clean and clean-all	2015-04-17 17:22:38 +03:00