pluto_hdl_adi/library/common/up_dac_common.v

458 lines
15 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module up_dac_common #(
// parameters
parameter ID = 0,
parameter CONFIG = 0,
parameter COMMON_ID = 6'h10,
parameter DRP_DISABLE = 6'h00,
parameter USERPORTS_DISABLE = 0,
parameter GPIO_DISABLE = 0) (
// mmcm reset
output mmcm_rst,
// dac interface
input dac_clk,
output dac_rst,
output dac_sync,
output dac_frame,
output dac_clksel,
output dac_par_type,
output dac_par_enb,
output dac_r1_mode,
output dac_datafmt,
output [15:0] dac_datarate,
input dac_status,
input dac_status_ovf,
input dac_status_unf,
input [31:0] dac_clk_ratio,
output up_dac_ce,
// drp interface
output up_drp_sel,
output up_drp_wr,
output [11:0] up_drp_addr,
output [31:0] up_drp_wdata,
input [31:0] up_drp_rdata,
input up_drp_ready,
input up_drp_locked,
// user channel control
output [ 7:0] up_usr_chanmax,
input [ 7:0] dac_usr_chanmax,
input [31:0] up_dac_gpio_in,
output [31:0] up_dac_gpio_out,
// bus interface
input up_rstn,
input up_clk,
input up_wreq,
input [13:0] up_waddr,
input [31:0] up_wdata,
output up_wack,
input up_rreq,
input [13:0] up_raddr,
output [31:0] up_rdata,
output up_rack);
// parameters
localparam VERSION = 32'h00090062;
// internal registers
reg up_core_preset = 'd1;
reg up_mmcm_preset = 'd1;
reg up_wack_int = 'd0;
reg [31:0] up_scratch = 'd0;
reg up_dac_clk_enb_int = 'd0;
reg up_dac_clk_enb = 'd0;
reg up_mmcm_resetn = 'd0;
reg up_resetn = 'd0;
reg up_dac_sync = 'd0;
reg up_dac_par_type = 'd0;
reg up_dac_par_enb = 'd0;
reg up_dac_r1_mode = 'd0;
reg up_dac_datafmt = 'd0;
reg [15:0] up_dac_datarate = 'd0;
reg up_dac_frame = 'd0;
reg up_dac_clksel = 'd0;
reg up_drp_sel_int = 'd0;
reg up_drp_wr_int = 'd0;
reg up_drp_status = 'd0;
reg up_drp_rwn = 'd0;
reg [11:0] up_drp_addr_int = 'd0;
reg [31:0] up_drp_wdata_int = 'd0;
reg [31:0] up_drp_rdata_hold = 'd0;
reg up_status_ovf = 'd0;
reg up_status_unf = 'd0;
reg [ 7:0] up_usr_chanmax_int = 'd0;
reg [31:0] up_dac_gpio_out_int = 'd0;
reg up_rack_int = 'd0;
reg [31:0] up_rdata_int = 'd0;
reg dac_sync_d = 'd0;
reg dac_sync_2d = 'd0;
reg [ 5:0] dac_sync_count = 'd0;
reg dac_sync_int = 'd0;
reg dac_frame_d = 'd0;
reg dac_frame_2d = 'd0;
reg dac_frame_int = 'd0;
// internal signals
wire up_wreq_s;
wire up_rreq_s;
wire up_xfer_done_s;
wire up_status_s;
wire up_status_ovf_s;
wire up_status_unf_s;
wire dac_sync_s;
wire dac_frame_s;
wire [31:0] up_dac_clk_count_s;
// decode block select
assign up_wreq_s = (up_waddr[13:8] == COMMON_ID) ? up_wreq : 1'b0;
assign up_rreq_s = (up_raddr[13:8] == COMMON_ID) ? up_rreq : 1'b0;
assign up_dac_ce = up_dac_clk_enb_int;
// processor write interface
assign up_wack = up_wack_int;
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_core_preset <= 1'd1;
up_mmcm_preset <= 1'd1;
up_wack_int <= 'd0;
up_scratch <= 'd0;
up_dac_clk_enb_int <= 'd1;
up_dac_clk_enb <= 'd0;
up_mmcm_resetn <= 'd0;
up_resetn <= 'd0;
up_dac_sync <= 'd0;
up_dac_par_type <= 'd0;
up_dac_par_enb <= 'd0;
up_dac_r1_mode <= 'd0;
up_dac_datafmt <= 'd0;
up_dac_datarate <= 'd0;
up_dac_frame <= 'd0;
up_dac_clksel <= 'd0;
end else begin
up_dac_clk_enb_int <= ~up_dac_clk_enb;
up_core_preset <= ~up_resetn;
up_mmcm_preset <= ~up_mmcm_resetn;
up_wack_int <= up_wreq_s;
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h02)) begin
up_scratch <= up_wdata;
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h10)) begin
up_dac_clk_enb <= up_wdata[2];
up_mmcm_resetn <= up_wdata[1];
up_resetn <= up_wdata[0];
end
if (up_dac_sync == 1'b1) begin
if (up_xfer_done_s == 1'b1) begin
up_dac_sync <= 1'b0;
end
end else if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h11)) begin
up_dac_sync <= up_wdata[0];
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h12)) begin
up_dac_par_type <= up_wdata[7];
up_dac_par_enb <= up_wdata[6];
up_dac_r1_mode <= up_wdata[5];
up_dac_datafmt <= up_wdata[4];
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h13)) begin
up_dac_datarate <= up_wdata[15:0];
end
if (up_dac_frame == 1'b1) begin
if (up_xfer_done_s == 1'b1) begin
up_dac_frame <= 1'b0;
end
end else if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h14)) begin
up_dac_frame <= up_wdata[0];
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h18)) begin
up_dac_clksel <= up_wdata[0];
end
end
end
assign up_drp_sel = up_drp_sel_int;
assign up_drp_wr = up_drp_wr_int;
assign up_drp_addr = up_drp_addr_int;
assign up_drp_wdata = up_drp_wdata_int;
generate
if (DRP_DISABLE == 1) begin
always @(posedge up_clk) begin
up_drp_sel_int <= 'd0;
up_drp_wr_int <= 'd0;
up_drp_status <= 'd0;
up_drp_rwn <= 'd0;
up_drp_addr_int <= 'd0;
up_drp_wdata_int <= 'd0;
up_drp_rdata_hold <= 'd0;
end
end else begin
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_drp_sel_int <= 'd0;
up_drp_wr_int <= 'd0;
up_drp_status <= 'd0;
up_drp_rwn <= 'd0;
up_drp_addr_int <= 'd0;
up_drp_wdata_int <= 'd0;
up_drp_rdata_hold <= 'd0;
end else begin
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h1c)) begin
up_drp_sel_int <= 1'b1;
up_drp_wr_int <= ~up_wdata[28];
end else begin
up_drp_sel_int <= 1'b0;
up_drp_wr_int <= 1'b0;
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h1c)) begin
up_drp_status <= 1'b1;
end else if (up_drp_ready == 1'b1) begin
up_drp_status <= 1'b0;
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h1c)) begin
up_drp_rwn <= up_wdata[28];
up_drp_addr_int <= up_wdata[27:16];
end
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h1e)) begin
up_drp_wdata_int <= up_wdata;
end
if (up_drp_ready == 1'b1) begin
up_drp_rdata_hold <= up_drp_rdata;
end
end
end
end
endgenerate
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_status_ovf <= 'd0;
up_status_unf <= 'd0;
end else begin
if (up_status_ovf_s == 1'b1) begin
up_status_ovf <= 1'b1;
end else if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h22)) begin
up_status_ovf <= up_status_ovf & ~up_wdata[1];
end
if (up_status_unf_s == 1'b1) begin
up_status_unf <= 1'b1;
end else if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h22)) begin
up_status_unf <= up_status_unf & ~up_wdata[0];
end
end
end
assign up_usr_chanmax = up_usr_chanmax_int;
generate
if (USERPORTS_DISABLE == 1) begin
always @(posedge up_clk) begin
up_usr_chanmax_int <= 'd0;
end
end else begin
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_usr_chanmax_int <= 'd0;
end else begin
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h28)) begin
up_usr_chanmax_int <= up_wdata[7:0];
end
end
end
end
endgenerate
assign up_dac_gpio_out = up_dac_gpio_out_int;
generate
if (GPIO_DISABLE == 1) begin
always @(posedge up_clk) begin
up_dac_gpio_out_int <= 'd0;
end
end else begin
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_dac_gpio_out_int <= 'd0;
end else begin
if ((up_wreq_s == 1'b1) && (up_waddr[7:0] == 8'h2f)) begin
up_dac_gpio_out_int <= up_wdata;
end
end
end
end
endgenerate
// processor read interface
assign up_rack = up_rack_int;
assign up_rdata = up_rdata_int;
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_rack_int <= 'd0;
up_rdata_int <= 'd0;
end else begin
up_rack_int <= up_rreq_s;
if (up_rreq_s == 1'b1) begin
case (up_raddr[7:0])
8'h00: up_rdata_int <= VERSION;
8'h01: up_rdata_int <= ID;
8'h02: up_rdata_int <= up_scratch;
8'h03: up_rdata_int <= CONFIG;
8'h10: up_rdata_int <= {29'd0, up_dac_clk_enb, up_mmcm_resetn, up_resetn};
8'h11: up_rdata_int <= {31'd0, up_dac_sync};
8'h12: up_rdata_int <= {24'd0, up_dac_par_type, up_dac_par_enb, up_dac_r1_mode,
up_dac_datafmt, 4'd0};
8'h13: up_rdata_int <= {16'd0, up_dac_datarate};
8'h14: up_rdata_int <= {31'd0, up_dac_frame};
8'h15: up_rdata_int <= up_dac_clk_count_s;
8'h16: up_rdata_int <= dac_clk_ratio;
8'h17: up_rdata_int <= {31'd0, up_status_s};
8'h18: up_rdata_int <= {31'd0, up_dac_clksel};
8'h1c: up_rdata_int <= {3'd0, up_drp_rwn, up_drp_addr_int, 16'b0};
8'h1d: up_rdata_int <= {14'd0, up_drp_locked, up_drp_status, 16'b0};
8'h1e: up_rdata_int <= up_drp_wdata_int;
8'h1f: up_rdata_int <= up_drp_rdata_hold;
8'h22: up_rdata_int <= {30'd0, up_status_ovf, up_status_unf};
8'h28: up_rdata_int <= {24'd0, dac_usr_chanmax};
8'h2e: up_rdata_int <= up_dac_gpio_in;
8'h2f: up_rdata_int <= up_dac_gpio_out_int;
default: up_rdata_int <= 0;
endcase
end else begin
up_rdata_int <= 32'd0;
end
end
end
// resets
ad_rst i_mmcm_rst_reg (.preset(up_mmcm_preset), .clk(up_clk), .rst(mmcm_rst));
ad_rst i_core_rst_reg (.preset(up_core_preset), .clk(dac_clk), .rst(dac_rst));
// dac control & status
up_xfer_cntrl #(.DATA_WIDTH(23)) i_xfer_cntrl (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_data_cntrl ({ up_dac_sync,
up_dac_clksel,
up_dac_frame,
up_dac_par_type,
up_dac_par_enb,
up_dac_r1_mode,
up_dac_datafmt,
up_dac_datarate}),
.up_xfer_done (up_xfer_done_s),
.d_rst (dac_rst),
.d_clk (dac_clk),
.d_data_cntrl ({ dac_sync_s,
dac_clksel,
dac_frame_s,
dac_par_type,
dac_par_enb,
dac_r1_mode,
dac_datafmt,
dac_datarate}));
up_xfer_status #(.DATA_WIDTH(3)) i_xfer_status (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_data_status ({up_status_s,
up_status_ovf_s,
up_status_unf_s}),
.d_rst (dac_rst),
.d_clk (dac_clk),
.d_data_status ({ dac_status,
dac_status_ovf,
dac_status_unf}));
// generate frame and enable
assign dac_sync = dac_sync_int;
assign dac_frame = dac_frame_int;
always @(posedge dac_clk) begin
dac_sync_d <= dac_sync_s;
dac_sync_2d <= dac_sync_d;
if (dac_sync_count[5] == 1'b1) begin
dac_sync_count <= dac_sync_count + 1'b1;
end else if ((dac_sync_d == 1'b1) && (dac_sync_2d == 1'b0)) begin
dac_sync_count <= 6'h20;
end
dac_sync_int <= dac_sync_count[5];
dac_frame_d <= dac_frame_s;
dac_frame_2d <= dac_frame_d;
dac_frame_int <= dac_frame_d & ~dac_frame_2d;
end
// dac clock monitor
up_clock_mon i_clock_mon (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_d_count (up_dac_clk_count_s),
.d_rst (dac_rst),
.d_clk (dac_clk));
endmodule
// ***************************************************************************
// ***************************************************************************