105 lines
3.6 KiB
Verilog
105 lines
3.6 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright (C) 2014-2023 Analog Devices, Inc. All rights reserved.
|
|
//
|
|
// In this HDL repository, there are many different and unique modules, consisting
|
|
// of various HDL (Verilog or VHDL) components. The individual modules are
|
|
// developed independently, and may be accompanied by separate and unique license
|
|
// terms.
|
|
//
|
|
// The user should read each of these license terms, and understand the
|
|
// freedoms and responsibilities that he or she has by using this source/core.
|
|
//
|
|
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
// A PARTICULAR PURPOSE.
|
|
//
|
|
// Redistribution and use of source or resulting binaries, with or without modification
|
|
// of this file, are permitted under one of the following two license terms:
|
|
//
|
|
// 1. The GNU General Public License version 2 as published by the
|
|
// Free Software Foundation, which can be found in the top level directory
|
|
// of this repository (LICENSE_GPL2), and also online at:
|
|
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
|
|
//
|
|
// OR
|
|
//
|
|
// 2. An ADI specific BSD license, which can be found in the top level directory
|
|
// of this repository (LICENSE_ADIBSD), and also on-line at:
|
|
// https://github.com/analogdevicesinc/hdl/blob/main/LICENSE_ADIBSD
|
|
// This will allow to generate bit files and not release the source code,
|
|
// as long as it attaches to an ADI device.
|
|
//
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module fmcjesdadc1_spi (
|
|
|
|
input spi_csn,
|
|
input spi_clk,
|
|
input spi_mosi,
|
|
output spi_miso,
|
|
|
|
inout spi_sdio
|
|
);
|
|
|
|
localparam FMC27X_CPLD = 8'h00;
|
|
localparam FMC27X_AD9517 = 8'h84;
|
|
localparam FMC27X_AD9250_0 = 8'h80;
|
|
localparam FMC27X_AD9250_1 = 8'h81;
|
|
localparam FMC27X_AD9129_0 = 8'h82;
|
|
localparam FMC27X_AD9129_1 = 8'h83;
|
|
|
|
// internal registers
|
|
|
|
reg [ 7:0] spi_devid = 'd0;
|
|
reg [ 5:0] spi_count = 'd0;
|
|
reg spi_rd_wr_n = 'd0;
|
|
reg spi_enable = 'd0;
|
|
|
|
// internal signals
|
|
|
|
wire spi_enable_s;
|
|
|
|
// check on rising edge and change on falling edge
|
|
|
|
assign spi_enable_s = spi_enable & ~spi_csn;
|
|
|
|
always @(posedge spi_clk or posedge spi_csn) begin
|
|
if (spi_csn == 1'b1) begin
|
|
spi_count <= 6'd0;
|
|
spi_devid <= 8'd0;
|
|
spi_rd_wr_n <= 1'd0;
|
|
end else begin
|
|
spi_count <= spi_count + 1'b1;
|
|
if (spi_count <= 6'd7) begin
|
|
spi_devid <= {spi_devid[6:0], spi_mosi};
|
|
end
|
|
if (spi_count == 6'd8) begin
|
|
spi_rd_wr_n <= spi_mosi;
|
|
end
|
|
end
|
|
end
|
|
|
|
always @(negedge spi_clk or posedge spi_csn) begin
|
|
if (spi_csn == 1'b1) begin
|
|
spi_enable <= 1'b0;
|
|
end else begin
|
|
if (((spi_count == 6'd16) && (spi_devid == FMC27X_CPLD)) ||
|
|
((spi_count == 6'd16) && (spi_devid == FMC27X_AD9129_0)) ||
|
|
((spi_count == 6'd16) && (spi_devid == FMC27X_AD9129_1)) ||
|
|
((spi_count == 6'd24) && (spi_devid == FMC27X_AD9517)) ||
|
|
((spi_count == 6'd24) && (spi_devid == FMC27X_AD9250_0)) ||
|
|
((spi_count == 6'd24) && (spi_devid == FMC27X_AD9250_1))) begin
|
|
spi_enable <= spi_rd_wr_n;
|
|
end
|
|
end
|
|
end
|
|
|
|
assign spi_miso = spi_sdio;
|
|
assign spi_sdio = (spi_enable_s == 1'b1) ? 1'bz : spi_mosi;
|
|
|
|
endmodule
|