143 lines
3.8 KiB
Verilog
143 lines
3.8 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
|
|
//
|
|
// In this HDL repository, there are many different and unique modules, consisting
|
|
// of various HDL (Verilog or VHDL) components. The individual modules are
|
|
// developed independently, and may be accompanied by separate and unique license
|
|
// terms.
|
|
//
|
|
// The user should read each of these license terms, and understand the
|
|
// freedoms and responsibilities that he or she has by using this source/core.
|
|
//
|
|
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
// A PARTICULAR PURPOSE.
|
|
//
|
|
// Redistribution and use of source or resulting binaries, with or without modification
|
|
// of this file, are permitted under one of the following two license terms:
|
|
//
|
|
// 1. The GNU General Public License version 2 as published by the
|
|
// Free Software Foundation, which can be found in the top level directory
|
|
// of this repository (LICENSE_GPL2), and also online at:
|
|
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
|
|
//
|
|
// OR
|
|
//
|
|
// 2. An ADI specific BSD license, which can be found in the top level directory
|
|
// of this repository (LICENSE_ADIBSD), and also on-line at:
|
|
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
|
|
// This will allow to generate bit files and not release the source code,
|
|
// as long as it attaches to an ADI device.
|
|
//
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
module dmac_dest_fifo_inf #(
|
|
|
|
parameter ID_WIDTH = 3,
|
|
parameter DATA_WIDTH = 64,
|
|
parameter BEATS_PER_BURST_WIDTH = 4)(
|
|
|
|
input clk,
|
|
input resetn,
|
|
|
|
input enable,
|
|
output enabled,
|
|
|
|
input req_valid,
|
|
output req_ready,
|
|
|
|
output [ID_WIDTH-1:0] response_id,
|
|
output reg [ID_WIDTH-1:0] data_id = 'h0,
|
|
input data_eot,
|
|
input response_eot,
|
|
|
|
input en,
|
|
output reg [DATA_WIDTH-1:0] dout,
|
|
output reg valid,
|
|
output reg underflow,
|
|
|
|
output xfer_req,
|
|
|
|
output fifo_ready,
|
|
input fifo_valid,
|
|
input [DATA_WIDTH-1:0] fifo_data,
|
|
input fifo_last,
|
|
|
|
output response_valid,
|
|
input response_ready,
|
|
output response_resp_eot,
|
|
output [1:0] response_resp
|
|
);
|
|
|
|
`include "inc_id.vh"
|
|
|
|
reg active = 1'b0;
|
|
|
|
/* Last beat of the burst */
|
|
wire fifo_last_beat;
|
|
/* Last beat of the segment */
|
|
wire fifo_eot_beat;
|
|
|
|
assign enabled = enable;
|
|
assign fifo_ready = en & (fifo_valid | ~enable);
|
|
|
|
/* fifo_last == 1'b1 implies fifo_valid == 1'b1 */
|
|
assign fifo_last_beat = fifo_ready & fifo_last;
|
|
assign fifo_eot_beat = fifo_last_beat & data_eot;
|
|
|
|
assign req_ready = fifo_eot_beat | ~active;
|
|
assign xfer_req = active;
|
|
|
|
always @(posedge clk) begin
|
|
if (en) begin
|
|
dout <= fifo_valid ? fifo_data : {DATA_WIDTH{1'b0}};
|
|
valid <= fifo_valid & enable;
|
|
underflow <= ~(fifo_valid & enable);
|
|
end else begin
|
|
valid <= 1'b0;
|
|
underflow <= 1'b0;
|
|
end
|
|
end
|
|
|
|
always @(posedge clk) begin
|
|
if (resetn == 1'b0) begin
|
|
data_id <= 'h00;
|
|
end else if (fifo_last_beat == 1'b1) begin
|
|
data_id <= inc_id(data_id);
|
|
end
|
|
end
|
|
|
|
always @(posedge clk) begin
|
|
if (resetn == 1'b0) begin
|
|
active <= 1'b0;
|
|
end else if (req_valid == 1'b1) begin
|
|
active <= 1'b1;
|
|
end else if (fifo_eot_beat == 1'b1) begin
|
|
active <= 1'b0;
|
|
end
|
|
end
|
|
|
|
dmac_response_generator # (
|
|
.ID_WIDTH(ID_WIDTH)
|
|
) i_response_generator (
|
|
.clk(clk),
|
|
.resetn(resetn),
|
|
|
|
.enable(enable),
|
|
.enabled(),
|
|
|
|
.request_id(data_id),
|
|
.response_id(response_id),
|
|
|
|
.eot(response_eot),
|
|
|
|
.resp_valid(response_valid),
|
|
.resp_ready(response_ready),
|
|
.resp_eot(response_resp_eot),
|
|
.resp_resp(response_resp)
|
|
);
|
|
|
|
endmodule
|