136 lines
4.4 KiB
Verilog
136 lines
4.4 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2014 - 2020 (c) Analog Devices, Inc. All rights reserved.
|
|
//
|
|
// In this HDL repository, there are many different and unique modules, consisting
|
|
// of various HDL (Verilog or VHDL) components. The individual modules are
|
|
// developed independently, and may be accompanied by separate and unique license
|
|
// terms.
|
|
//
|
|
// The user should read each of these license terms, and understand the
|
|
// freedoms and responsibilities that he or she has by using this source/core.
|
|
//
|
|
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
// A PARTICULAR PURPOSE.
|
|
//
|
|
// Redistribution and use of source or resulting binaries, with or without modification
|
|
// of this file, are permitted under one of the following two license terms:
|
|
//
|
|
// 1. The GNU General Public License version 2 as published by the
|
|
// Free Software Foundation, which can be found in the top level directory
|
|
// of this repository (LICENSE_GPL2), and also online at:
|
|
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
|
|
//
|
|
// OR
|
|
//
|
|
// 2. An ADI specific BSD license, which can be found in the top level directory
|
|
// of this repository (LICENSE_ADIBSD), and also on-line at:
|
|
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
|
|
// This will allow to generate bit files and not release the source code,
|
|
// as long as it attaches to an ADI device.
|
|
//
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module adrv9001_tx #(
|
|
parameter CMOS_LVDS_N = 0,
|
|
parameter NUM_LANES = 4,
|
|
parameter FPGA_TECHNOLOGY = 0,
|
|
parameter USE_RX_CLK_FOR_TX = 0
|
|
) (
|
|
input ref_clk,
|
|
input up_clk,
|
|
|
|
input mssi_sync,
|
|
input tx_output_enable,
|
|
|
|
// physical interface (transmit)
|
|
output tx_dclk_out_n_NC,
|
|
output tx_dclk_out_p_dclk_out,
|
|
input tx_dclk_in_n_NC,
|
|
input tx_dclk_in_p_dclk_in,
|
|
output tx_idata_out_n_idata0,
|
|
output tx_idata_out_p_idata1,
|
|
output tx_qdata_out_n_qdata2,
|
|
output tx_qdata_out_p_qdata3,
|
|
output tx_strobe_out_n_NC,
|
|
output tx_strobe_out_p_strobe_out,
|
|
|
|
input rx_clk_div,
|
|
input rx_clk,
|
|
input rx_ssi_rst,
|
|
|
|
// internal resets and clocks
|
|
|
|
input dac_rst,
|
|
output dac_clk_div,
|
|
|
|
input [7:0] dac_data_0,
|
|
input [7:0] dac_data_1,
|
|
input [7:0] dac_data_2,
|
|
input [7:0] dac_data_3,
|
|
input [7:0] dac_data_strb,
|
|
input [7:0] dac_data_clk,
|
|
input dac_data_valid
|
|
);
|
|
|
|
wire [6*8-1:0] serdes_in;
|
|
wire [5:0] gpio_out;
|
|
|
|
periphery_clk_buf tx_clk_buf(
|
|
.inclk (tx_dclk_in_p_dclk_in),
|
|
.outclk (tx_clk)
|
|
);
|
|
|
|
assign serdes_in = {dac_data_clk,
|
|
dac_data_strb,
|
|
dac_data_3,
|
|
dac_data_2,
|
|
dac_data_1,
|
|
dac_data_0};
|
|
|
|
assign {tx_dclk_out_p_dclk_out,
|
|
tx_strobe_out_p_strobe_out,
|
|
tx_qdata_out_p_qdata3,
|
|
tx_qdata_out_n_qdata2,
|
|
tx_idata_out_p_idata1,
|
|
tx_idata_out_n_idata0} = gpio_out;
|
|
|
|
genvar i;
|
|
generate
|
|
for (i = 0; i <= 5; i = i + 1) begin: g_ddr_o
|
|
|
|
reg [7:0] shift_reg = 8'b0;
|
|
wire [1:0] gpio_in;
|
|
|
|
// DDR output
|
|
adrv9001_gpio_out gpio_tx_out (
|
|
.ck(tx_clk),
|
|
.din(gpio_in),
|
|
.pad_out(gpio_out[i])
|
|
);
|
|
|
|
always @(posedge tx_clk) begin
|
|
if (dac_data_valid) begin
|
|
shift_reg <= serdes_in[i*8+:8];
|
|
end else begin
|
|
shift_reg <= {shift_reg[5:0],2'b0};
|
|
end
|
|
end
|
|
// Order of transmission:
|
|
// gpio_in[0] - first
|
|
// gpio_in[1] - last
|
|
assign gpio_in = {shift_reg[6],shift_reg[7]};
|
|
|
|
end
|
|
endgenerate
|
|
|
|
// No clock divider, qualifier used instead
|
|
assign dac_clk_div = tx_clk;
|
|
assign dac_clk = tx_clk;
|
|
|
|
endmodule
|