pluto_hdl_adi/library/axi_dmac/response_handler.v

96 lines
2.8 KiB
Verilog

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsabilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
module dmac_response_handler #(
parameter ID_WIDTH = 3)(
input clk,
input resetn,
input bvalid,
output bready,
input [1:0] bresp,
output reg [ID_WIDTH-1:0] id,
input [ID_WIDTH-1:0] request_id,
input sync_id,
input enable,
output reg enabled,
input eot,
output resp_valid,
input resp_ready,
output resp_eot,
output [1:0] resp_resp
);
`include "resp.h"
`include "inc_id.h"
assign resp_resp = bresp;
assign resp_eot = eot;
wire active = id != request_id && enabled;
assign bready = active && resp_ready;
assign resp_valid = active && bvalid;
// We have to wait for all responses before we can disable the response handler
always @(posedge clk) begin
if (resetn == 1'b0) begin
enabled <= 1'b0;
end else begin
if (enable)
enabled <= 1'b1;
else if (request_id == id)
enabled <= 1'b0;
end
end
always @(posedge clk) begin
if (resetn == 1'b0) begin
id <= 'h0;
end else begin
if ((bready && bvalid) ||
(sync_id && id != request_id))
id <= inc_id(id);
end
end
endmodule