240 lines
8.4 KiB
Verilog
240 lines
8.4 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
|
|
//
|
|
// In this HDL repository, there are many different and unique modules, consisting
|
|
// of various HDL (Verilog or VHDL) components. The individual modules are
|
|
// developed independently, and may be accompanied by separate and unique license
|
|
// terms.
|
|
//
|
|
// The user should read each of these license terms, and understand the
|
|
// freedoms and responsibilities that he or she has by using this source/core.
|
|
//
|
|
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
|
|
// A PARTICULAR PURPOSE.
|
|
//
|
|
// Redistribution and use of source or resulting binaries, with or without modification
|
|
// of this file, are permitted under one of the following two license terms:
|
|
//
|
|
// 1. The GNU General Public License version 2 as published by the
|
|
// Free Software Foundation, which can be found in the top level directory
|
|
// of this repository (LICENSE_GPL2), and also online at:
|
|
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
|
|
//
|
|
// OR
|
|
//
|
|
// 2. An ADI specific BSD license, which can be found in the top level directory
|
|
// of this repository (LICENSE_ADIBSD), and also on-line at:
|
|
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
|
|
// This will allow to generate bit files and not release the source code,
|
|
// as long as it attaches to an ADI device.
|
|
//
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module up_axi #(
|
|
|
|
parameter AXI_ADDRESS_WIDTH = 16) (
|
|
|
|
// reset and clocks
|
|
|
|
input up_rstn,
|
|
input up_clk,
|
|
|
|
// axi4 interface
|
|
|
|
input up_axi_awvalid,
|
|
input [(AXI_ADDRESS_WIDTH-1):0] up_axi_awaddr,
|
|
output up_axi_awready,
|
|
input up_axi_wvalid,
|
|
input [31:0] up_axi_wdata,
|
|
input [ 3:0] up_axi_wstrb,
|
|
output up_axi_wready,
|
|
output up_axi_bvalid,
|
|
output [ 1:0] up_axi_bresp,
|
|
input up_axi_bready,
|
|
input up_axi_arvalid,
|
|
input [(AXI_ADDRESS_WIDTH-1):0] up_axi_araddr,
|
|
output up_axi_arready,
|
|
output up_axi_rvalid,
|
|
output [ 1:0] up_axi_rresp,
|
|
output [31:0] up_axi_rdata,
|
|
input up_axi_rready,
|
|
|
|
// pcore interface
|
|
|
|
output up_wreq,
|
|
output [(AXI_ADDRESS_WIDTH-3):0] up_waddr,
|
|
output [31:0] up_wdata,
|
|
input up_wack,
|
|
output up_rreq,
|
|
output [(AXI_ADDRESS_WIDTH-3):0] up_raddr,
|
|
input [31:0] up_rdata,
|
|
input up_rack);
|
|
|
|
// internal registers
|
|
|
|
reg up_axi_awready_int = 'd0;
|
|
reg up_axi_wready_int = 'd0;
|
|
reg up_axi_bvalid_int = 'd0;
|
|
reg up_wack_d = 'd0;
|
|
reg up_wsel = 'd0;
|
|
reg up_wreq_int = 'd0;
|
|
reg [(AXI_ADDRESS_WIDTH-3):0] up_waddr_int = 'd0;
|
|
reg [31:0] up_wdata_int = 'd0;
|
|
reg [ 4:0] up_wcount = 'd0;
|
|
reg up_axi_arready_int = 'd0;
|
|
reg up_axi_rvalid_int = 'd0;
|
|
reg [31:0] up_axi_rdata_int = 'd0;
|
|
reg up_rack_d = 'd0;
|
|
reg [31:0] up_rdata_d = 'd0;
|
|
reg up_rsel = 'd0;
|
|
reg up_rreq_int = 'd0;
|
|
reg [(AXI_ADDRESS_WIDTH-3):0] up_raddr_int = 'd0;
|
|
reg [ 4:0] up_rcount = 'd0;
|
|
|
|
// internal signals
|
|
|
|
wire up_wack_s;
|
|
wire up_rack_s;
|
|
wire [31:0] up_rdata_s;
|
|
|
|
// write channel interface
|
|
|
|
assign up_axi_awready = up_axi_awready_int;
|
|
assign up_axi_wready = up_axi_wready_int;
|
|
assign up_axi_bvalid = up_axi_bvalid_int;
|
|
assign up_axi_bresp = 2'd0;
|
|
|
|
always @(posedge up_clk) begin
|
|
if (up_rstn == 1'b0) begin
|
|
up_axi_awready_int <= 'd0;
|
|
up_axi_wready_int <= 'd0;
|
|
up_axi_bvalid_int <= 'd0;
|
|
end else begin
|
|
if (up_axi_awready_int == 1'b1) begin
|
|
up_axi_awready_int <= 1'b0;
|
|
end else if (up_wack_s == 1'b1) begin
|
|
up_axi_awready_int <= 1'b1;
|
|
end
|
|
if (up_axi_wready_int == 1'b1) begin
|
|
up_axi_wready_int <= 1'b0;
|
|
end else if (up_wack_s == 1'b1) begin
|
|
up_axi_wready_int <= 1'b1;
|
|
end
|
|
if ((up_axi_bready == 1'b1) && (up_axi_bvalid_int == 1'b1)) begin
|
|
up_axi_bvalid_int <= 1'b0;
|
|
end else if (up_wack_d == 1'b1) begin
|
|
up_axi_bvalid_int <= 1'b1;
|
|
end
|
|
end
|
|
end
|
|
|
|
assign up_wreq = up_wreq_int;
|
|
assign up_waddr = up_waddr_int;
|
|
assign up_wdata = up_wdata_int;
|
|
assign up_wack_s = (up_wcount == 5'h1f) ? 1'b1 : (up_wcount[4] & up_wack);
|
|
|
|
always @(posedge up_clk) begin
|
|
if (up_rstn == 1'b0) begin
|
|
up_wack_d <= 'd0;
|
|
up_wsel <= 'd0;
|
|
up_wreq_int <= 'd0;
|
|
up_waddr_int <= 'd0;
|
|
up_wdata_int <= 'd0;
|
|
up_wcount <= 'd0;
|
|
end else begin
|
|
up_wack_d <= up_wack_s;
|
|
if (up_wsel == 1'b1) begin
|
|
if ((up_axi_bready == 1'b1) && (up_axi_bvalid_int == 1'b1)) begin
|
|
up_wsel <= 1'b0;
|
|
end
|
|
up_wreq_int <= 1'b0;
|
|
end else begin
|
|
up_wsel <= up_axi_awvalid & up_axi_wvalid;
|
|
up_wreq_int <= up_axi_awvalid & up_axi_wvalid;
|
|
up_waddr_int <= up_axi_awaddr[(AXI_ADDRESS_WIDTH-1):2];
|
|
up_wdata_int <= up_axi_wdata;
|
|
end
|
|
if (up_wack_s == 1'b1) begin
|
|
up_wcount <= 5'h00;
|
|
end else if (up_wcount[4] == 1'b1) begin
|
|
up_wcount <= up_wcount + 1'b1;
|
|
end else if (up_wreq_int == 1'b1) begin
|
|
up_wcount <= 5'h10;
|
|
end
|
|
end
|
|
end
|
|
|
|
// read channel interface
|
|
|
|
assign up_axi_arready = up_axi_arready_int;
|
|
assign up_axi_rvalid = up_axi_rvalid_int;
|
|
assign up_axi_rdata = up_axi_rdata_int;
|
|
assign up_axi_rresp = 2'd0;
|
|
|
|
always @(posedge up_clk) begin
|
|
if (up_rstn == 1'b0) begin
|
|
up_axi_arready_int <= 'd0;
|
|
up_axi_rvalid_int <= 'd0;
|
|
up_axi_rdata_int <= 'd0;
|
|
end else begin
|
|
if (up_axi_arready_int == 1'b1) begin
|
|
up_axi_arready_int <= 1'b0;
|
|
end else if (up_rack_s == 1'b1) begin
|
|
up_axi_arready_int <= 1'b1;
|
|
end
|
|
if ((up_axi_rready == 1'b1) && (up_axi_rvalid_int == 1'b1)) begin
|
|
up_axi_rvalid_int <= 1'b0;
|
|
up_axi_rdata_int <= 32'd0;
|
|
end else if (up_rack_d == 1'b1) begin
|
|
up_axi_rvalid_int <= 1'b1;
|
|
up_axi_rdata_int <= up_rdata_d;
|
|
end
|
|
end
|
|
end
|
|
|
|
assign up_rreq = up_rreq_int;
|
|
assign up_raddr = up_raddr_int;
|
|
assign up_rack_s = (up_rcount == 5'h1f) ? 1'b1 : (up_rcount[4] & up_rack);
|
|
assign up_rdata_s = (up_rcount == 5'h1f) ? {2{16'hdead}} : up_rdata;
|
|
|
|
always @(posedge up_clk) begin
|
|
if (up_rstn == 1'b0) begin
|
|
up_rack_d <= 'd0;
|
|
up_rdata_d <= 'd0;
|
|
up_rsel <= 'd0;
|
|
up_rreq_int <= 'd0;
|
|
up_raddr_int <= 'd0;
|
|
up_rcount <= 'd0;
|
|
end else begin
|
|
up_rack_d <= up_rack_s;
|
|
up_rdata_d <= up_rdata_s;
|
|
if (up_rsel == 1'b1) begin
|
|
if ((up_axi_rready == 1'b1) && (up_axi_rvalid_int == 1'b1)) begin
|
|
up_rsel <= 1'b0;
|
|
end
|
|
up_rreq_int <= 1'b0;
|
|
end else begin
|
|
up_rsel <= up_axi_arvalid;
|
|
up_rreq_int <= up_axi_arvalid;
|
|
up_raddr_int <= up_axi_araddr[(AXI_ADDRESS_WIDTH-1):2];
|
|
end
|
|
if (up_rack_s == 1'b1) begin
|
|
up_rcount <= 5'h00;
|
|
end else if (up_rcount[4] == 1'b1) begin
|
|
up_rcount <= up_rcount + 1'b1;
|
|
end else if (up_rreq_int == 1'b1) begin
|
|
up_rcount <= 5'h10;
|
|
end
|
|
end
|
|
end
|
|
|
|
endmodule
|
|
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|