pluto_hdl_adi/library/axi_dmac/axi_dmac_ip.tcl

398 lines
12 KiB
Tcl

# ip
source ../scripts/adi_env.tcl
source $ad_hdl_dir/library/scripts/adi_ip.tcl
adi_ip_create axi_dmac
adi_ip_files axi_dmac [list \
"$ad_hdl_dir/library/common/ad_mem.v" \
"$ad_hdl_dir/library/common/up_axi.v" \
"inc_id.vh" \
"resp.vh" \
"axi_dmac_burst_memory.v" \
"axi_dmac_regmap.v" \
"axi_dmac_regmap_request.v" \
"axi_dmac_reset_manager.v" \
"axi_dmac_resize_dest.v" \
"axi_dmac_resize_src.v" \
"axi_dmac_response_manager.v" \
"axi_dmac_transfer.v" \
"address_generator.v" \
"data_mover.v" \
"request_arb.v" \
"request_generator.v" \
"response_handler.v" \
"axi_register_slice.v" \
"2d_transfer.v" \
"dest_axi_mm.v" \
"dest_axi_stream.v" \
"dest_fifo_inf.v" \
"src_axi_mm.v" \
"src_axi_stream.v" \
"src_fifo_inf.v" \
"splitter.v" \
"response_generator.v" \
"axi_dmac.v" \
"axi_dmac_constr.ttcl" \
"axi_dmac_pkg_sv.ttcl" \
"bd/bd.tcl" ]
adi_ip_properties axi_dmac
adi_ip_infer_mm_interfaces axi_dmac
adi_ip_ttcl axi_dmac "axi_dmac_constr.ttcl"
adi_ip_sim_ttcl axi_dmac "axi_dmac_pkg_sv.ttcl"
adi_ip_bd axi_dmac "bd/bd.tcl"
adi_ip_add_core_dependencies { \
analog.com:user:util_axis_fifo:1.0 \
analog.com:user:util_cdc:1.0 \
}
set_property display_name "ADI AXI DMA Controller" [ipx::current_core]
set_property description "ADI AXI DMA Controller" [ipx::current_core]
adi_add_bus "s_axis" "slave" \
"xilinx.com:interface:axis_rtl:1.0" \
"xilinx.com:interface:axis:1.0" \
[list {"s_axis_ready" "TREADY"} \
{"s_axis_valid" "TVALID"} \
{"s_axis_data" "TDATA"} \
{"s_axis_last" "TLAST"} \
{"s_axis_user" "TUSER"} ]
adi_add_bus_clock "s_axis_aclk" "s_axis"
adi_add_bus "m_axis" "master" \
"xilinx.com:interface:axis_rtl:1.0" \
"xilinx.com:interface:axis:1.0" \
[list {"m_axis_ready" "TREADY"} \
{"m_axis_valid" "TVALID"} \
{"m_axis_data" "TDATA"} \
{"m_axis_last" "TLAST"} ]
adi_add_bus_clock "m_axis_aclk" "m_axis"
adi_set_bus_dependency "m_src_axi" "m_src_axi" \
"(spirit:decode(id('MODELPARAM_VALUE.DMA_TYPE_SRC')) = 0)"
adi_set_bus_dependency "m_dest_axi" "m_dest_axi" \
"(spirit:decode(id('MODELPARAM_VALUE.DMA_TYPE_DEST')) = 0)"
adi_set_bus_dependency "s_axis" "s_axis" \
"(spirit:decode(id('MODELPARAM_VALUE.DMA_TYPE_SRC')) = 1)"
adi_set_bus_dependency "m_axis" "m_axis" \
"(spirit:decode(id('MODELPARAM_VALUE.DMA_TYPE_DEST')) = 1)"
adi_set_ports_dependency "fifo_rd" \
"(spirit:decode(id('MODELPARAM_VALUE.DMA_TYPE_DEST')) = 2)"
adi_set_ports_dependency "dest_diag_level_bursts" \
"(spirit:decode(id('MODELPARAM_VALUE.ENABLE_DIAGNOSTICS_IF')) = 1)"
# These are in the design to keep the Altera tools happy which can't handle
# uni-directional AXI interfaces. The Xilinx tools can and do a better job when
# they know that the interface is uni-directional, so disable the ports.
set dummy_axi_ports [list \
"m_dest_axi_arvalid" \
"m_dest_axi_arready" \
"m_dest_axi_araddr" \
"m_dest_axi_arlen" \
"m_dest_axi_arsize" \
"m_dest_axi_arburst" \
"m_dest_axi_arcache" \
"m_dest_axi_arprot" \
"m_dest_axi_rready" \
"m_dest_axi_rvalid" \
"m_dest_axi_rresp" \
"m_dest_axi_rdata" \
"m_src_axi_awvalid" \
"m_src_axi_awready" \
"m_src_axi_awvalid" \
"m_src_axi_awaddr" \
"m_src_axi_awlen" \
"m_src_axi_awsize" \
"m_src_axi_awburst" \
"m_src_axi_awcache" \
"m_src_axi_awprot" \
"m_src_axi_wvalid" \
"m_src_axi_wready" \
"m_src_axi_wvalid" \
"m_src_axi_wdata" \
"m_src_axi_wstrb" \
"m_src_axi_wlast" \
"m_src_axi_bready" \
"m_src_axi_bvalid" \
"m_src_axi_bresp" \
]
# These are in the design to keep the Altera tools happy which require
# certain signals in AXI3 mode even if these are defined as optinal in the standard.
lappend dummy_axi_ports \
"m_dest_axi_awid" \
"m_dest_axi_awlock" \
"m_dest_axi_wid" \
"m_dest_axi_bid" \
"m_dest_axi_arid" \
"m_dest_axi_arlock" \
"m_dest_axi_rid" \
"m_dest_axi_rlast" \
"m_src_axi_arid" \
"m_src_axi_arlock" \
"m_src_axi_rid" \
"m_src_axi_awid" \
"m_src_axi_awlock" \
"m_src_axi_wid" \
"m_src_axi_bid"
foreach p $dummy_axi_ports {
adi_set_ports_dependency $p "false"
}
set_property master_address_space_ref m_dest_axi \
[ipx::get_bus_interfaces m_dest_axi \
-of_objects [ipx::current_core]]
set_property master_address_space_ref m_src_axi \
[ipx::get_bus_interfaces m_src_axi \
-of_objects [ipx::current_core]]
adi_add_bus "fifo_wr" "slave" \
"analog.com:interface:fifo_wr_rtl:1.0" \
"analog.com:interface:fifo_wr:1.0" \
{ \
{"fifo_wr_en" "EN"} \
{"fifo_wr_din" "DATA"} \
{"fifo_wr_overflow" "OVERFLOW"} \
{"fifo_wr_sync" "SYNC"} \
{"fifo_wr_xfer_req" "XFER_REQ"} \
}
adi_add_bus_clock "fifo_wr_clk" "fifo_wr"
adi_set_bus_dependency "fifo_wr" "fifo_wr" \
"(spirit:decode(id('MODELPARAM_VALUE.DMA_TYPE_SRC')) = 2)"
adi_add_bus "fifo_rd" "slave" \
"analog.com:interface:fifo_rd_rtl:1.0" \
"analog.com:interface:fifo_rd:1.0" \
{
{"fifo_rd_en" "EN"} \
{"fifo_rd_dout" "DATA"} \
{"fifo_rd_valid" "VALID"} \
{"fifo_rd_underflow" "UNDERFLOW"} \
}
adi_add_bus_clock "fifo_rd_clk" "fifo_rd"
adi_set_bus_dependency "fifo_rd" "fifo_rd" \
"(spirit:decode(id('MODELPARAM_VALUE.DMA_TYPE_DEST')) = 2)"
foreach port {"m_dest_axi_aresetn" "m_src_axi_aresetn" \
"s_axis_valid" "s_axis_data" "s_axis_last" "m_axis_ready" \
"fifo_wr_en" "fifo_wr_din" "fifo_rd_en"} {
set_property DRIVER_VALUE "0" [ipx::get_ports $port]
}
foreach port {"s_axis_user" "fifo_wr_sync"} {
set_property DRIVER_VALUE "1" [ipx::get_ports $port]
}
set cc [ipx::current_core]
# The core does not issue narrow bursts
foreach intf [ipx::get_bus_interfaces m_*_axi -of_objects $cc] {
set para [ipx::add_bus_parameter SUPPORTS_NARROW_BURST $intf]
set_property "VALUE" "0" $para
}
set_property -dict [list \
"value_validation_type" "list" \
"value_validation_list" "2 4 8 16 32" \
] \
[ipx::get_user_parameters FIFO_SIZE -of_objects $cc]
set_property -dict [list \
"value_validation_type" "range_long" \
"value_validation_range_minimum" "8" \
"value_validation_range_maximum" "32" \
] \
[ipx::get_user_parameters DMA_LENGTH_WIDTH -of_objects $cc]
foreach {k v} { \
"ASYNC_CLK_REQ_SRC" "true" \
"ASYNC_CLK_SRC_DEST" "true" \
"ASYNC_CLK_DEST_REQ" "true" \
"CYCLIC" "false" \
"DMA_2D_TRANSFER" "false" \
"SYNC_TRANSFER_START" "false" \
"AXI_SLICE_SRC" "false" \
"AXI_SLICE_DEST" "false" \
"DISABLE_DEBUG_REGISTERS" "false" \
"ENABLE_DIAGNOSTICS_IF" "false" \
} { \
set_property -dict [list \
"value_format" "bool" \
"value" $v \
] \
[ipx::get_user_parameters $k -of_objects $cc]
set_property -dict [list \
"value_format" "bool" \
"value" $v \
] \
[ipx::get_hdl_parameters $k -of_objects $cc]
}
set_property -dict [list \
"enablement_tcl_expr" "\$DMA_TYPE_SRC != 0" \
] \
[ipx::get_user_parameters SYNC_TRANSFER_START -of_objects $cc]
foreach dir {"SRC" "DEST"} {
set_property -dict [list \
"value_validation_type" "list" \
"value_validation_list" "16 32 64 128 256 512 1024" \
] \
[ipx::get_user_parameters DMA_DATA_WIDTH_${dir} -of_objects $cc]
set_property -dict [list \
"value_validation_type" "pairs" \
"value_validation_pairs" {"AXI3" "1" "AXI4" "0"} \
"enablement_tcl_expr" "\$DMA_TYPE_${dir} == 0" \
] \
[ipx::get_user_parameters DMA_AXI_PROTOCOL_${dir} -of_objects $cc]
set_property -dict [list \
"value_validation_type" "pairs" \
"value_validation_pairs" { \
"Memory-Mapped AXI" "0" \
"Streaming AXI" "1" \
"FIFO Interface" "2" \
} \
] \
[ipx::get_user_parameters DMA_TYPE_${dir} -of_objects $cc]
}
set page0 [ipgui::get_pagespec -name "Page 0" -component $cc]
set g [ipgui::add_group -name {DMA Endpoint Configuration} -component $cc \
-parent $page0 -display_name {DMA Endpoint Configuration} \
-layout "horizontal"]
set src_group [ipgui::add_group -name {Source} -component $cc -parent $g \
-display_name {Source}]
set dest_group [ipgui::add_group -name {Destination} -component $cc -parent $g \
-display_name {Destination}]
foreach {dir group} [list "SRC" $src_group "DEST" $dest_group] {
set p [ipgui::get_guiparamspec -name "DMA_TYPE_${dir}" -component $cc]
ipgui::move_param -component $cc -order 0 $p -parent $group
set_property -dict [list \
"widget" "comboBox" \
"display_name" "Type" \
] $p
set p [ipgui::get_guiparamspec -name "DMA_AXI_PROTOCOL_${dir}" -component $cc]
ipgui::move_param -component $cc -order 1 $p -parent $group
set_property -dict [list \
"widget" "comboBox" \
"display_name" "AXI Protocol" \
] $p
set p [ipgui::get_guiparamspec -name "DMA_DATA_WIDTH_${dir}" -component $cc]
ipgui::move_param -component $cc -order 2 $p -parent $group
set_property -dict [list \
"display_name" "Bus Width" \
] $p
set p [ipgui::get_guiparamspec -name "AXI_SLICE_${dir}" -component $cc]
ipgui::move_param -component $cc -order 3 $p -parent $group
set_property -dict [list \
"display_name" "Insert Register Slice" \
] $p
}
set p [ipgui::get_guiparamspec -name "SYNC_TRANSFER_START" -component $cc]
ipgui::move_param -component $cc -order 4 $p -parent $src_group
set_property -dict [list \
"display_name" "Transfer Start Synchronization Support" \
] $p
set general_group [ipgui::add_group -name "General Configuration" -component $cc \
-parent $page0 -display_name "General Configuration"]
set p [ipgui::get_guiparamspec -name "ID" -component $cc]
ipgui::move_param -component $cc -order 0 $p -parent $general_group
set_property -dict [list \
"display_name" "Core ID" \
] $p
set p [ipgui::get_guiparamspec -name "DMA_LENGTH_WIDTH" -component $cc]
ipgui::move_param -component $cc -order 1 $p -parent $general_group
set_property -dict [list \
"display_name" "DMA Transfer Length Register Width" \
] $p
set p [ipgui::get_guiparamspec -name "FIFO_SIZE" -component $cc]
ipgui::move_param -component $cc -order 2 $p -parent $general_group
set_property -dict [list \
"widget" "comboBox" \
"display_name" "Store-and-Forward Memory Size (In Bursts)" \
] $p
set p [ipgui::get_guiparamspec -name "MAX_BYTES_PER_BURST" -component $cc]
ipgui::move_param -component $cc -order 3 $p -parent $general_group
set_property -dict [list \
"display_name" "Maximum Bytes per Burst" \
] $p
set feature_group [ipgui::add_group -name "Features" -component $cc \
-parent $page0 -display_name "Features"]
set p [ipgui::get_guiparamspec -name "CYCLIC" -component $cc]
ipgui::move_param -component $cc -order 0 $p -parent $feature_group
set_property -dict [list \
"display_name" "Cyclic Transfer Support" \
] $p
set p [ipgui::get_guiparamspec -name "DMA_2D_TRANSFER" -component $cc]
ipgui::move_param -component $cc -order 1 $p -parent $feature_group
set_property -dict [list \
"display_name" "2D Transfer Support" \
] $p
set clk_group [ipgui::add_group -name {Clock Domain Configuration} -component $cc \
-parent $page0 -display_name {Clock Domain Configuration}]
set p [ipgui::get_guiparamspec -name "ASYNC_CLK_REQ_SRC" -component $cc]
ipgui::move_param -component $cc -order 0 $p -parent $clk_group
set_property -dict [list \
"display_name" "Request and Source Clock Asynchronous" \
] $p
set p [ipgui::get_guiparamspec -name "ASYNC_CLK_SRC_DEST" -component $cc]
ipgui::move_param -component $cc -order 1 $p -parent $clk_group
set_property -dict [list \
"display_name" "Source and Destination Clock Asynchronous" \
] $p
set p [ipgui::get_guiparamspec -name "ASYNC_CLK_DEST_REQ" -component $cc]
ipgui::move_param -component $cc -order 2 $p -parent $clk_group
set_property -dict [list \
"display_name" "Destination and Request Clock Asynchronous" \
] $p
set dbg_group [ipgui::add_group -name {Debug} -component $cc \
-parent $page0 -display_name {Debug}]
set p [ipgui::get_guiparamspec -name "DISABLE_DEBUG_REGISTERS" -component $cc]
ipgui::move_param -component $cc -order 0 $p -parent $dbg_group
set_property -dict [list \
"display_name" "Disable Debug Registers" \
] $p
set p [ipgui::get_guiparamspec -name "ENABLE_DIAGNOSTICS_IF" -component $cc]
ipgui::move_param -component $cc -order 1 $p -parent $dbg_group
set_property -dict [list \
"display_name" "Enable Diagnostics Interface" \
] $p
ipgui::remove_param -component $cc [ipgui::get_guiparamspec -name "DMA_AXI_ADDR_WIDTH" -component $cc]
ipgui::remove_param -component $cc [ipgui::get_guiparamspec -name "AXI_ID_WIDTH_SRC" -component $cc]
ipgui::remove_param -component $cc [ipgui::get_guiparamspec -name "AXI_ID_WIDTH_DEST" -component $cc]
ipx::create_xgui_files [ipx::current_core]
ipx::save_core $cc