pluto_hdl_adi/projects/common/zc706/zc706_plddr3_dacfifo_bd.tcl

45 lines
1.9 KiB
Tcl

# pl ddr3 (use only when dma is not capable of keeping up).
# generic fifo interface - existence is oblivious to software.
proc ad_dacfifo_create {dac_fifo_name dac_data_width dac_dma_data_width dac_fifo_address_width} {
upvar ad_hdl_dir ad_hdl_dir
ad_ip_instance proc_sys_reset axi_rstgen
ad_ip_instance mig_7series axi_ddr_cntrl
file copy -force $ad_hdl_dir/projects/common/zc706/zc706_plddr3_mig.prj [get_property IP_DIR \
[get_ips [get_property CONFIG.Component_Name [get_bd_cells axi_ddr_cntrl]]]]
ad_ip_parameter axi_ddr_cntrl CONFIG.XML_INPUT_FILE zc706_plddr3_mig.prj
create_bd_port -dir I -type rst sys_rst
set_property CONFIG.POLARITY ACTIVE_HIGH [get_bd_ports sys_rst]
create_bd_intf_port -mode Master -vlnv xilinx.com:interface:ddrx_rtl:1.0 ddr3
create_bd_intf_port -mode Slave -vlnv xilinx.com:interface:diff_clock_rtl:1.0 sys_clk
ad_connect sys_rst axi_ddr_cntrl/sys_rst
ad_connect sys_clk axi_ddr_cntrl/SYS_CLK
ad_connect ddr3 axi_ddr_cntrl/DDR3
ad_ip_instance axi_dacfifo $dac_fifo_name
ad_ip_parameter $dac_fifo_name CONFIG.DAC_DATA_WIDTH $dac_data_width
ad_ip_parameter $dac_fifo_name CONFIG.DMA_DATA_WIDTH $dac_dma_data_width
ad_ip_parameter $dac_fifo_name CONFIG.AXI_DATA_WIDTH 512
ad_ip_parameter $dac_fifo_name CONFIG.AXI_SIZE 6
ad_ip_parameter $dac_fifo_name CONFIG.AXI_LENGTH 255
ad_ip_parameter $dac_fifo_name CONFIG.AXI_ADDRESS 0x80000000
ad_ip_parameter $dac_fifo_name CONFIG.AXI_ADDRESS_LIMIT 0xbfffffff
ad_connect axi_ddr_cntrl/S_AXI $dac_fifo_name/axi
ad_connect axi_ddr_cntrl/ui_clk $dac_fifo_name/axi_clk
ad_connect axi_ddr_cntrl/ui_clk axi_rstgen/slowest_sync_clk
ad_connect sys_cpu_resetn axi_rstgen/ext_reset_in
ad_connect axi_rstgen/peripheral_aresetn $dac_fifo_name/axi_resetn
ad_connect axi_rstgen/peripheral_aresetn axi_ddr_cntrl/aresetn
ad_connect axi_ddr_cntrl/device_temp_i GND
assign_bd_address [get_bd_addr_segs -of_objects [get_bd_cells axi_ddr_cntrl]]
}