397 lines
13 KiB
Verilog
Executable File
397 lines
13 KiB
Verilog
Executable File
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2011(c) Analog Devices, Inc.
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without modification,
|
|
// are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module system_top (
|
|
|
|
// clock and resets
|
|
|
|
sys_clk,
|
|
sys_resetn,
|
|
|
|
// ddr3
|
|
|
|
ddr3_a,
|
|
ddr3_ba,
|
|
ddr3_clk_p,
|
|
ddr3_clk_n,
|
|
ddr3_cke,
|
|
ddr3_cs_n,
|
|
ddr3_dm,
|
|
ddr3_ras_n,
|
|
ddr3_cas_n,
|
|
ddr3_we_n,
|
|
ddr3_reset_n,
|
|
ddr3_dq,
|
|
ddr3_dqs_p,
|
|
ddr3_dqs_n,
|
|
ddr3_odt,
|
|
ddr3_rzq,
|
|
|
|
// ethernet
|
|
|
|
eth_rx_clk,
|
|
eth_rx_data,
|
|
eth_rx_cntrl,
|
|
eth_tx_clk_out,
|
|
eth_tx_data,
|
|
eth_tx_cntrl,
|
|
eth_mdc,
|
|
eth_mdio_i,
|
|
eth_mdio_o,
|
|
eth_mdio_t,
|
|
|
|
// board gpio
|
|
|
|
led_grn,
|
|
led_red,
|
|
push_buttons,
|
|
dip_switches,
|
|
|
|
// lane interface
|
|
|
|
ref_clk,
|
|
rx_data,
|
|
rx_sync,
|
|
rx_sysref,
|
|
|
|
// spi
|
|
|
|
spi_csn,
|
|
spi_clk,
|
|
spi_sdio);
|
|
|
|
// clock and resets
|
|
|
|
input sys_clk;
|
|
input sys_resetn;
|
|
|
|
// ddr3
|
|
|
|
output [ 13:0] ddr3_a;
|
|
output [ 2:0] ddr3_ba;
|
|
output ddr3_clk_p;
|
|
output ddr3_clk_n;
|
|
output ddr3_cke;
|
|
output ddr3_cs_n;
|
|
output [ 7:0] ddr3_dm;
|
|
output ddr3_ras_n;
|
|
output ddr3_cas_n;
|
|
output ddr3_we_n;
|
|
output ddr3_reset_n;
|
|
inout [ 63:0] ddr3_dq;
|
|
inout [ 7:0] ddr3_dqs_p;
|
|
inout [ 7:0] ddr3_dqs_n;
|
|
output ddr3_odt;
|
|
input ddr3_rzq;
|
|
|
|
// ethernet
|
|
|
|
input eth_rx_clk;
|
|
input [ 3:0] eth_rx_data;
|
|
input eth_rx_cntrl;
|
|
output eth_tx_clk_out;
|
|
output [ 3:0] eth_tx_data;
|
|
output eth_tx_cntrl;
|
|
output eth_mdc;
|
|
input eth_mdio_i;
|
|
output eth_mdio_o;
|
|
output eth_mdio_t;
|
|
|
|
// board gpio
|
|
|
|
output [ 7:0] led_grn;
|
|
output [ 7:0] led_red;
|
|
input [ 2:0] push_buttons;
|
|
input [ 7:0] dip_switches;
|
|
|
|
// lane interface
|
|
|
|
input ref_clk;
|
|
input [ 3:0] rx_data;
|
|
output rx_sync;
|
|
output rx_sysref;
|
|
|
|
// spi
|
|
|
|
output spi_csn;
|
|
output spi_clk;
|
|
inout spi_sdio;
|
|
|
|
// internal registers
|
|
|
|
reg rx_sysref_m1 = 'd0;
|
|
reg rx_sysref_m2 = 'd0;
|
|
reg rx_sysref_m3 = 'd0;
|
|
reg rx_sysref = 'd0;
|
|
|
|
// internal clocks and resets
|
|
|
|
wire sys_125m_clk;
|
|
wire sys_25m_clk;
|
|
wire sys_2m5_clk;
|
|
wire eth_tx_clk;
|
|
wire rx_clk;
|
|
wire adc0_clk;
|
|
wire adc1_clk;
|
|
|
|
// internal signals
|
|
|
|
wire sys_pll_locked_s;
|
|
wire eth_tx_reset_s;
|
|
wire eth_tx_mode_1g_s;
|
|
wire eth_tx_mode_10m_100m_n_s;
|
|
wire spi_csn_s;
|
|
wire spi_clk_s;
|
|
wire spi_mosi_s;
|
|
wire spi_miso_s;
|
|
wire [ 63:0] adc0_ddata_s;
|
|
wire adc0_dsync_s;
|
|
wire adc0_dovf_s;
|
|
wire adc0_dwr_s;
|
|
wire adc0_mon_valid_s;
|
|
wire [ 55:0] adc0_mon_data_s;
|
|
wire [ 63:0] adc1_ddata_s;
|
|
wire adc1_dsync_s;
|
|
wire adc1_dovf_s;
|
|
wire adc1_dwr_s;
|
|
wire adc1_mon_valid_s;
|
|
wire [ 55:0] adc1_mon_data_s;
|
|
wire [ 3:0] rx_ip_sof_s;
|
|
wire [127:0] rx_ip_data_s;
|
|
wire [127:0] rx_data_s;
|
|
wire rx_sw_rstn_s;
|
|
wire rx_sysref_s;
|
|
wire rx_err_s;
|
|
wire rx_ready_s;
|
|
wire [ 3:0] rx_rst_state_s;
|
|
wire rx_lane_aligned_s;
|
|
wire [ 3:0] rx_analog_reset_s;
|
|
wire [ 3:0] rx_digital_reset_s;
|
|
wire [ 3:0] rx_cdr_locked_s;
|
|
wire [ 3:0] rx_cal_busy_s;
|
|
wire rx_pll_locked_s;
|
|
wire [ 15:0] rx_xcvr_status_s;
|
|
|
|
// ethernet transmit clock
|
|
|
|
assign eth_tx_clk = (eth_tx_mode_1g_s == 1'b1) ? sys_125m_clk :
|
|
(eth_tx_mode_10m_100m_n_s == 1'b0) ? sys_25m_clk : sys_2m5_clk;
|
|
|
|
altddio_out #(.width(1)) i_eth_tx_clk_out (
|
|
.aset (1'b0),
|
|
.sset (1'b0),
|
|
.sclr (1'b0),
|
|
.oe (1'b1),
|
|
.oe_out (),
|
|
.datain_h (1'b1),
|
|
.datain_l (1'b0),
|
|
.outclocken (1'b1),
|
|
.aclr (eth_tx_reset_s),
|
|
.outclock (eth_tx_clk),
|
|
.dataout (eth_tx_clk_out));
|
|
|
|
assign eth_tx_reset_s = ~sys_pll_locked_s;
|
|
|
|
always @(posedge rx_clk) begin
|
|
rx_sysref_m1 <= rx_sysref_s;
|
|
rx_sysref_m2 <= rx_sysref_m1;
|
|
rx_sysref_m3 <= rx_sysref_m2;
|
|
rx_sysref <= rx_sysref_m2 & ~rx_sysref_m3;
|
|
end
|
|
|
|
sld_signaltap #(
|
|
.sld_advanced_trigger_entity ("basic,1,"),
|
|
.sld_data_bits (114),
|
|
.sld_data_bit_cntr_bits (8),
|
|
.sld_enable_advanced_trigger (0),
|
|
.sld_mem_address_bits (10),
|
|
.sld_node_crc_bits (32),
|
|
.sld_node_crc_hiword (10311),
|
|
.sld_node_crc_loword (14297),
|
|
.sld_node_info (1076736),
|
|
.sld_ram_block_type ("AUTO"),
|
|
.sld_sample_depth (1024),
|
|
.sld_storage_qualifier_gap_record (0),
|
|
.sld_storage_qualifier_mode ("OFF"),
|
|
.sld_trigger_bits (2),
|
|
.sld_trigger_in_enabled (0),
|
|
.sld_trigger_level (1),
|
|
.sld_trigger_level_pipeline (1))
|
|
i_signaltap (
|
|
.acq_clk (rx_clk),
|
|
.acq_data_in ({rx_sysref, rx_sync, adc1_mon_data_s, adc0_mon_data_s}),
|
|
.acq_trigger_in ({rx_sysref, rx_sync}));
|
|
|
|
genvar n;
|
|
generate
|
|
for (n = 0; n < 4; n = n + 1) begin: g_align_1
|
|
ad_jesd_align i_jesd_align (
|
|
.rx_clk (rx_clk),
|
|
.rx_sof (rx_ip_sof_s),
|
|
.rx_ip_data (rx_ip_data_s[n*32+31:n*32]),
|
|
.rx_data (rx_data_s[n*32+31:n*32]));
|
|
end
|
|
endgenerate
|
|
|
|
assign rx_xcvr_status_s[15:15] = 1'd0;
|
|
assign rx_xcvr_status_s[14:14] = rx_sync;
|
|
assign rx_xcvr_status_s[13:13] = rx_ready_s;
|
|
assign rx_xcvr_status_s[12:12] = rx_pll_locked_s;
|
|
assign rx_xcvr_status_s[11: 8] = rx_rst_state_s;
|
|
assign rx_xcvr_status_s[ 7: 4] = rx_cdr_locked_s;
|
|
assign rx_xcvr_status_s[ 3: 0] = rx_cal_busy_s;
|
|
|
|
ad_xcvr_rx_rst #(.NUM_OF_LANES (4)) i_xcvr_rx_rst (
|
|
.rx_clk (rx_clk),
|
|
.rx_rstn (sys_resetn),
|
|
.rx_sw_rstn (rx_sw_rstn_s),
|
|
.rx_pll_locked (rx_pll_locked_s),
|
|
.rx_cal_busy (rx_cal_busy_s),
|
|
.rx_cdr_locked (rx_cdr_locked_s),
|
|
.rx_analog_reset (rx_analog_reset_s),
|
|
.rx_digital_reset (rx_digital_reset_s),
|
|
.rx_ready (rx_ready_s),
|
|
.rx_rst_state (rx_rst_state_s));
|
|
|
|
fmcjesdadc1_spi i_fmcjesdadc1_spi (
|
|
.sys_clk (sys_clk),
|
|
.spi4_csn (spi_csn_s),
|
|
.spi4_clk (spi_clk_s),
|
|
.spi4_mosi (spi_mosi_s),
|
|
.spi4_miso (spi_miso_s),
|
|
.spi3_csn (spi_csn),
|
|
.spi3_clk (spi_clk),
|
|
.spi3_sdio (spi_sdio));
|
|
|
|
system_bd i_system_bd (
|
|
.sys_clk_clk (sys_clk),
|
|
.sys_reset_reset_n (sys_resetn),
|
|
.sys_125m_clk_clk (sys_125m_clk),
|
|
.sys_25m_clk_clk (sys_25m_clk),
|
|
.sys_2m5_clk_clk (sys_2m5_clk),
|
|
.sys_pll_locked_export (sys_pll_locked_s),
|
|
.sys_ddr3_phy_mem_a (ddr3_a),
|
|
.sys_ddr3_phy_mem_ba (ddr3_ba),
|
|
.sys_ddr3_phy_mem_ck (ddr3_clk_p),
|
|
.sys_ddr3_phy_mem_ck_n (ddr3_clk_n),
|
|
.sys_ddr3_phy_mem_cke (ddr3_cke),
|
|
.sys_ddr3_phy_mem_cs_n (ddr3_cs_n),
|
|
.sys_ddr3_phy_mem_dm (ddr3_dm),
|
|
.sys_ddr3_phy_mem_ras_n (ddr3_ras_n),
|
|
.sys_ddr3_phy_mem_cas_n (ddr3_cas_n),
|
|
.sys_ddr3_phy_mem_we_n (ddr3_we_n),
|
|
.sys_ddr3_phy_mem_reset_n (ddr3_reset_n),
|
|
.sys_ddr3_phy_mem_dq (ddr3_dq),
|
|
.sys_ddr3_phy_mem_dqs (ddr3_dqs_p),
|
|
.sys_ddr3_phy_mem_dqs_n (ddr3_dqs_n),
|
|
.sys_ddr3_phy_mem_odt (ddr3_odt),
|
|
.sys_ddr3_oct_rzqin (ddr3_rzq),
|
|
.sys_ethernet_tx_clk_clk (eth_tx_clk),
|
|
.sys_ethernet_rx_clk_clk (eth_rx_clk),
|
|
.sys_ethernet_status_set_10 (),
|
|
.sys_ethernet_status_set_1000 (),
|
|
.sys_ethernet_status_eth_mode (eth_tx_mode_1g_s),
|
|
.sys_ethernet_status_ena_10 (eth_tx_mode_10m_100m_n_s),
|
|
.sys_ethernet_rgmii_rgmii_in (eth_rx_data),
|
|
.sys_ethernet_rgmii_rgmii_out (eth_tx_data),
|
|
.sys_ethernet_rgmii_rx_control (eth_rx_cntrl),
|
|
.sys_ethernet_rgmii_tx_control (eth_tx_cntrl),
|
|
.sys_ethernet_mdio_mdc (eth_mdc),
|
|
.sys_ethernet_mdio_mdio_in (eth_mdio_i),
|
|
.sys_ethernet_mdio_mdio_out (eth_mdio_o),
|
|
.sys_ethernet_mdio_mdio_oen (eth_mdio_t),
|
|
.sys_gpio_in_port ({rx_xcvr_status_s, 5'd0, push_buttons, dip_switches}),
|
|
.sys_gpio_out_port ({14'd0, rx_sw_rstn_s, rx_sysref_s, led_grn, led_red}),
|
|
.sys_spi_MISO (spi_miso_s),
|
|
.sys_spi_MOSI (spi_mosi_s),
|
|
.sys_spi_SCLK (spi_clk_s),
|
|
.sys_spi_SS_n (spi_csn_s),
|
|
.axi_ad9250_0_xcvr_clk_clk (rx_clk),
|
|
.axi_ad9250_0_xcvr_data_data (rx_data_s[63:0]),
|
|
.axi_ad9250_0_adc_clock_clk (adc0_clk),
|
|
.axi_ad9250_0_adc_dma_if_ddata (adc0_ddata_s),
|
|
.axi_ad9250_0_adc_dma_if_dsync (adc0_dsync_s),
|
|
.axi_ad9250_0_adc_dma_if_dovf (adc0_dovf_s),
|
|
.axi_ad9250_0_adc_dma_if_dunf (1'b0),
|
|
.axi_ad9250_0_adc_dma_if_dwr (adc0_dwr_s),
|
|
.axi_ad9250_0_adc_mon_if_valid (adc0_mon_valid_s),
|
|
.axi_ad9250_0_adc_mon_if_data (adc0_mon_data_s),
|
|
.axi_dmac_0_fifo_wr_clock_clk (adc0_clk),
|
|
.axi_dmac_0_fifo_wr_if_ovf (adc0_dovf_s),
|
|
.axi_dmac_0_fifo_wr_if_wren (adc0_dwr_s),
|
|
.axi_dmac_0_fifo_wr_if_data (adc0_ddata_s),
|
|
.axi_dmac_0_fifo_wr_if_sync (adc0_dsync_s),
|
|
.axi_ad9250_1_xcvr_clk_clk (rx_clk),
|
|
.axi_ad9250_1_xcvr_data_data (rx_data_s[127:64]),
|
|
.axi_ad9250_1_adc_clock_clk (adc1_clk),
|
|
.axi_ad9250_1_adc_dma_if_ddata (adc1_ddata_s),
|
|
.axi_ad9250_1_adc_dma_if_dsync (adc1_dsync_s),
|
|
.axi_ad9250_1_adc_dma_if_dovf (adc1_dovf_s),
|
|
.axi_ad9250_1_adc_dma_if_dunf (1'b0),
|
|
.axi_ad9250_1_adc_dma_if_dwr (adc1_dwr_s),
|
|
.axi_ad9250_1_adc_mon_if_valid (adc1_mon_valid_s),
|
|
.axi_ad9250_1_adc_mon_if_data (adc1_mon_data_s),
|
|
.axi_dmac_1_fifo_wr_clock_clk (adc1_clk),
|
|
.axi_dmac_1_fifo_wr_if_ovf (adc1_dovf_s),
|
|
.axi_dmac_1_fifo_wr_if_wren (adc1_dwr_s),
|
|
.axi_dmac_1_fifo_wr_if_data (adc1_ddata_s),
|
|
.axi_dmac_1_fifo_wr_if_sync (adc1_dsync_s),
|
|
.sys_jesd204b_s1_rx_link_data (rx_ip_data_s),
|
|
.sys_jesd204b_s1_rx_link_valid (),
|
|
.sys_jesd204b_s1_rx_link_ready (1'b1),
|
|
.sys_jesd204b_s1_lane_aligned_all_export (rx_lane_aligned_s),
|
|
.sys_jesd204b_s1_sysref_export (rx_sysref),
|
|
.sys_jesd204b_s1_rx_ferr_export (rx_err_s),
|
|
.sys_jesd204b_s1_lane_aligned_export (rx_lane_aligned_s),
|
|
.sys_jesd204b_s1_sync_n_export (rx_sync),
|
|
.sys_jesd204b_s1_rx_sof_export (rx_ip_sof_s),
|
|
.sys_jesd204b_s1_rx_xcvr_data_rx_serial_data (rx_data),
|
|
.sys_jesd204b_s1_rx_analogreset_rx_analogreset (rx_analog_reset_s),
|
|
.sys_jesd204b_s1_rx_digitalreset_rx_digitalreset (rx_digital_reset_s),
|
|
.sys_jesd204b_s1_locked_export (rx_cdr_locked_s),
|
|
.sys_jesd204b_s1_rx_cal_busy_export (rx_cal_busy_s),
|
|
.sys_jesd204b_s1_ref_clk_clk (ref_clk),
|
|
.sys_jesd204b_s1_rx_clk_clk (rx_clk),
|
|
.sys_jesd204b_s1_pll_locked_export (rx_pll_locked_s));
|
|
|
|
endmodule
|
|
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|