227 lines
7.5 KiB
Verilog
227 lines
7.5 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2011(c) Analog Devices, Inc.
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without modification,
|
|
// are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module up_axi #(
|
|
|
|
parameter ADDRESS_WIDTH = 14,
|
|
parameter AXI_ADDRESS_WIDTH = 32) (
|
|
|
|
// reset and clocks
|
|
|
|
input up_rstn,
|
|
input up_clk,
|
|
|
|
// axi4 interface
|
|
|
|
input up_axi_awvalid,
|
|
input [AXI_AW:0] up_axi_awaddr,
|
|
output reg up_axi_awready,
|
|
input up_axi_wvalid,
|
|
input [31:0] up_axi_wdata,
|
|
input [ 3:0] up_axi_wstrb,
|
|
output reg up_axi_wready,
|
|
output reg up_axi_bvalid,
|
|
output [ 1:0] up_axi_bresp,
|
|
input up_axi_bready,
|
|
input up_axi_arvalid,
|
|
input [AXI_AW:0] up_axi_araddr,
|
|
output reg up_axi_arready,
|
|
output reg up_axi_rvalid,
|
|
output [ 1:0] up_axi_rresp,
|
|
output reg [31:0] up_axi_rdata,
|
|
input up_axi_rready,
|
|
|
|
// pcore interface
|
|
|
|
output reg up_wreq,
|
|
output reg [AW:0] up_waddr,
|
|
output reg [31:0] up_wdata,
|
|
input up_wack,
|
|
output reg up_rreq,
|
|
output reg [AW:0] up_raddr,
|
|
input [31:0] up_rdata,
|
|
input up_rack);
|
|
|
|
localparam AXI_AW = AXI_ADDRESS_WIDTH - 1;
|
|
localparam AW = ADDRESS_WIDTH - 1;
|
|
|
|
// internal registers
|
|
|
|
reg up_wack_d = 'd0;
|
|
reg up_wsel = 'd0;
|
|
reg [ 4:0] up_wcount = 'd0;
|
|
reg up_rack_d = 'd0;
|
|
reg [31:0] up_rdata_d = 'd0;
|
|
reg up_rsel = 'd0;
|
|
reg [ 4:0] up_rcount = 'd0;
|
|
|
|
// internal signals
|
|
|
|
wire up_wack_s;
|
|
wire up_rack_s;
|
|
wire [31:0] up_rdata_s;
|
|
|
|
// write channel interface
|
|
|
|
assign up_axi_bresp = 2'd0;
|
|
|
|
always @(negedge up_rstn or posedge up_clk) begin
|
|
if (up_rstn == 1'b0) begin
|
|
up_axi_awready <= 'd0;
|
|
up_axi_wready <= 'd0;
|
|
up_axi_bvalid <= 'd0;
|
|
end else begin
|
|
if (up_axi_awready == 1'b1) begin
|
|
up_axi_awready <= 1'b0;
|
|
end else if (up_wack_s == 1'b1) begin
|
|
up_axi_awready <= 1'b1;
|
|
end
|
|
if (up_axi_wready == 1'b1) begin
|
|
up_axi_wready <= 1'b0;
|
|
end else if (up_wack_s == 1'b1) begin
|
|
up_axi_wready <= 1'b1;
|
|
end
|
|
if ((up_axi_bready == 1'b1) && (up_axi_bvalid == 1'b1)) begin
|
|
up_axi_bvalid <= 1'b0;
|
|
end else if (up_wack_d == 1'b1) begin
|
|
up_axi_bvalid <= 1'b1;
|
|
end
|
|
end
|
|
end
|
|
|
|
assign up_wack_s = (up_wcount == 5'h1f) ? 1'b1 : (up_wcount[4] & up_wack);
|
|
|
|
always @(negedge up_rstn or posedge up_clk) begin
|
|
if (up_rstn == 1'b0) begin
|
|
up_wack_d <= 'd0;
|
|
up_wsel <= 'd0;
|
|
up_wreq <= 'd0;
|
|
up_waddr <= 'd0;
|
|
up_wdata <= 'd0;
|
|
up_wcount <= 'd0;
|
|
end else begin
|
|
up_wack_d <= up_wack_s;
|
|
if (up_wsel == 1'b1) begin
|
|
if ((up_axi_bready == 1'b1) && (up_axi_bvalid == 1'b1)) begin
|
|
up_wsel <= 1'b0;
|
|
end
|
|
up_wreq <= 1'b0;
|
|
up_waddr <= up_waddr;
|
|
up_wdata <= up_wdata;
|
|
end else begin
|
|
up_wsel <= up_axi_awvalid & up_axi_wvalid;
|
|
up_wreq <= up_axi_awvalid & up_axi_wvalid;
|
|
up_waddr <= up_axi_awaddr[AW+2:2];
|
|
up_wdata <= up_axi_wdata;
|
|
end
|
|
if (up_wack_s == 1'b1) begin
|
|
up_wcount <= 5'h00;
|
|
end else if (up_wcount[4] == 1'b1) begin
|
|
up_wcount <= up_wcount + 1'b1;
|
|
end else if (up_wreq == 1'b1) begin
|
|
up_wcount <= 5'h10;
|
|
end
|
|
end
|
|
end
|
|
|
|
// read channel interface
|
|
|
|
assign up_axi_rresp = 2'd0;
|
|
|
|
always @(negedge up_rstn or posedge up_clk) begin
|
|
if (up_rstn == 1'b0) begin
|
|
up_axi_arready <= 'd0;
|
|
up_axi_rvalid <= 'd0;
|
|
up_axi_rdata <= 'd0;
|
|
end else begin
|
|
if (up_axi_arready == 1'b1) begin
|
|
up_axi_arready <= 1'b0;
|
|
end else if (up_rack_s == 1'b1) begin
|
|
up_axi_arready <= 1'b1;
|
|
end
|
|
if ((up_axi_rready == 1'b1) && (up_axi_rvalid == 1'b1)) begin
|
|
up_axi_rvalid <= 1'b0;
|
|
up_axi_rdata <= 32'd0;
|
|
end else if (up_rack_d == 1'b1) begin
|
|
up_axi_rvalid <= 1'b1;
|
|
up_axi_rdata <= up_rdata_d;
|
|
end
|
|
end
|
|
end
|
|
|
|
assign up_rack_s = (up_rcount == 5'h1f) ? 1'b1 : (up_rcount[4] & up_rack);
|
|
assign up_rdata_s = (up_rcount == 5'h1f) ? {2{16'hdead}} : up_rdata;
|
|
|
|
always @(negedge up_rstn or posedge up_clk) begin
|
|
if (up_rstn == 1'b0) begin
|
|
up_rack_d <= 'd0;
|
|
up_rdata_d <= 'd0;
|
|
up_rsel <= 'd0;
|
|
up_rreq <= 'd0;
|
|
up_raddr <= 'd0;
|
|
up_rcount <= 'd0;
|
|
end else begin
|
|
up_rack_d <= up_rack_s;
|
|
up_rdata_d <= up_rdata_s;
|
|
if (up_rsel == 1'b1) begin
|
|
if ((up_axi_rready == 1'b1) && (up_axi_rvalid == 1'b1)) begin
|
|
up_rsel <= 1'b0;
|
|
end
|
|
up_rreq <= 1'b0;
|
|
up_raddr <= up_raddr;
|
|
end else begin
|
|
up_rsel <= up_axi_arvalid;
|
|
up_rreq <= up_axi_arvalid;
|
|
up_raddr <= up_axi_araddr[AW+2:2];
|
|
end
|
|
if (up_rack_s == 1'b1) begin
|
|
up_rcount <= 5'h00;
|
|
end else if (up_rcount[4] == 1'b1) begin
|
|
up_rcount <= up_rcount + 1'b1;
|
|
end else if (up_rreq == 1'b1) begin
|
|
up_rcount <= 5'h10;
|
|
end
|
|
end
|
|
end
|
|
|
|
endmodule
|
|
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|