415 lines
14 KiB
Verilog
415 lines
14 KiB
Verilog
// ***************************************************************************
|
|
// ***************************************************************************
|
|
// Copyright 2011(c) Analog Devices, Inc.
|
|
//
|
|
// All rights reserved.
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without modification,
|
|
// are permitted provided that the following conditions are met:
|
|
// - Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
// - Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in
|
|
// the documentation and/or other materials provided with the
|
|
// distribution.
|
|
// - Neither the name of Analog Devices, Inc. nor the names of its
|
|
// contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
// - The use of this software may or may not infringe the patent rights
|
|
// of one or more patent holders. This license does not release you
|
|
// from the requirement that you obtain separate licenses from these
|
|
// patent holders to use this software.
|
|
// - Use of the software either in source or binary form, must be run
|
|
// on or directly connected to an Analog Devices Inc. component.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
// PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
//
|
|
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|
|
|
|
`timescale 1ns/100ps
|
|
|
|
module axi_adc_trigger(
|
|
|
|
input clk,
|
|
|
|
input [ 1:0] trigger_i,
|
|
output [ 1:0] trigger_o,
|
|
output [ 1:0] trigger_t,
|
|
|
|
input [15:0] data_a,
|
|
input [15:0] data_b,
|
|
input data_valid_a,
|
|
input data_valid_b,
|
|
|
|
output [15:0] data_a_trig,
|
|
output [15:0] data_b_trig,
|
|
output data_valid_a_trig,
|
|
output data_valid_b_trig,
|
|
|
|
output [31:0] trigger_offset,
|
|
|
|
// axi interface
|
|
|
|
input s_axi_aclk,
|
|
input s_axi_aresetn,
|
|
input s_axi_awvalid,
|
|
input [31:0] s_axi_awaddr,
|
|
input [ 2:0] s_axi_awprot,
|
|
output s_axi_awready,
|
|
input s_axi_wvalid,
|
|
input [31:0] s_axi_wdata,
|
|
input [ 3:0] s_axi_wstrb,
|
|
output s_axi_wready,
|
|
output s_axi_bvalid,
|
|
output [ 1:0] s_axi_bresp,
|
|
input s_axi_bready,
|
|
input s_axi_arvalid,
|
|
input [31:0] s_axi_araddr,
|
|
input [ 2:0] s_axi_arprot,
|
|
output s_axi_arready,
|
|
output s_axi_rvalid,
|
|
output [31:0] s_axi_rdata,
|
|
output [ 1:0] s_axi_rresp,
|
|
input s_axi_rready);
|
|
|
|
// internal signals
|
|
|
|
wire up_clk;
|
|
wire up_rstn;
|
|
wire [13:0] up_waddr;
|
|
wire [31:0] up_wdata;
|
|
wire up_wack;
|
|
wire up_wreq;
|
|
wire up_rack;
|
|
wire [31:0] up_rdata;
|
|
wire up_rreq;
|
|
wire [13:0] up_raddr;
|
|
|
|
wire [ 1:0] io_selection;
|
|
|
|
wire [ 1:0] low_level;
|
|
wire [ 1:0] high_level;
|
|
wire [ 1:0] any_edge;
|
|
wire [ 1:0] rise_edge;
|
|
wire [ 1:0] fall_edge;
|
|
|
|
wire [15:0] limit_a;
|
|
wire [ 1:0] function_a;
|
|
wire [31:0] hysteresis_a;
|
|
wire [ 3:0] trigger_l_mix_a;
|
|
|
|
wire [15:0] limit_b;
|
|
wire [ 1:0] function_b;
|
|
wire [31:0] hysteresis_b;
|
|
wire [ 3:0] trigger_l_mix_b;
|
|
|
|
wire [ 2:0] trigger_out_mix;
|
|
wire [31:0] delay_trigger;
|
|
|
|
wire [15:0] data_a_cmp;
|
|
wire [15:0] data_b_cmp;
|
|
wire [15:0] limit_a_cmp;
|
|
wire [15:0] limit_b_cmp;
|
|
|
|
wire trigger_a_fall_edge;
|
|
wire trigger_a_rise_edge;
|
|
wire trigger_b_fall_edge;
|
|
wire trigger_b_rise_edge;
|
|
wire trigger_a_any_edge;
|
|
wire trigger_b_any_edge;
|
|
wire trigger_out_a;
|
|
wire trigger_out_b;
|
|
|
|
reg trigger_a_d1; // synchronization flip flop
|
|
reg trigger_a_d2; // synchronization flip flop
|
|
reg trigger_a_d3;
|
|
reg trigger_b_d1; // synchronization flip flop
|
|
reg trigger_b_d2; // synchronization flip flop
|
|
reg trigger_b_d3;
|
|
reg passthrough_high_a; // trigger when rising through the limit
|
|
reg passthrough_low_a; // trigger when fallingh thorugh the limit
|
|
reg low_a; // signal was under the limit, so if it goes through, assert rising
|
|
reg high_a; // signal was over the limit, so if it passes through, assert falling
|
|
reg comp_high_a; // signal is over the limit
|
|
reg comp_low_a; // signal is under the limit
|
|
reg passthrough_high_b; // trigger when rising through the limit
|
|
reg passthrough_low_b; // trigger when fallingh thorugh the limit
|
|
reg low_b; // signal was under the limit, so if it goes through, assert rising
|
|
reg high_b; // signal was over the limit, so if it passes through, assert falling
|
|
reg comp_high_b; // signal is over the limit
|
|
reg comp_low_b; // signal is under the limit
|
|
|
|
reg trigger_pin_a;
|
|
reg trigger_pin_b;
|
|
|
|
reg trigger_adc_a;
|
|
reg trigger_adc_b;
|
|
|
|
reg trigger_a;
|
|
reg trigger_b;
|
|
|
|
reg trigger_out_mixed;
|
|
|
|
reg [15:0] data_a_r;
|
|
reg [15:0] data_b_r;
|
|
reg data_valid_a_r;
|
|
reg data_valid_b_r;
|
|
|
|
// signal name changes
|
|
|
|
assign up_clk = s_axi_aclk;
|
|
assign up_rstn = s_axi_aresetn;
|
|
|
|
assign trigger_offset = delay_trigger;
|
|
|
|
assign trigger_t = io_selection;
|
|
|
|
assign trigger_a_fall_edge = (trigger_a_d2 == 1'b0 && trigger_a_d3 == 1'b1) ? 1'b1: 1'b0;
|
|
assign trigger_a_rise_edge = (trigger_a_d2 == 1'b1 && trigger_a_d3 == 1'b0) ? 1'b1: 1'b0;
|
|
assign trigger_a_any_edge = trigger_a_rise_edge | trigger_a_fall_edge;
|
|
assign trigger_b_fall_edge = (trigger_b_d2 == 1'b0 && trigger_b_d3 == 1'b1) ? 1'b1: 1'b0;
|
|
assign trigger_b_rise_edge = (trigger_b_d2 == 1'b1 && trigger_b_d3 == 1'b0) ? 1'b1: 1'b0;
|
|
assign trigger_b_any_edge = trigger_b_rise_edge | trigger_b_fall_edge;
|
|
|
|
assign data_a_cmp = {!data_a[15],data_a[14:0]};
|
|
assign data_b_cmp = {!data_b[15],data_b[14:0]};
|
|
assign limit_a_cmp = {!limit_a[15],limit_a[14:0]};
|
|
assign limit_b_cmp = {!limit_b[15],limit_b[14:0]};
|
|
|
|
assign data_a_trig = {trigger_out_mixed, data_a_r[14:0]};
|
|
assign data_b_trig = {trigger_out_mixed, data_b_r[14:0]};;
|
|
assign data_valid_a_trig = data_valid_a_r;
|
|
assign data_valid_b_trig = data_valid_b_r;
|
|
|
|
always @(posedge clk) begin
|
|
data_a_r <= data_a;
|
|
data_valid_a_r <= data_valid_a;
|
|
data_b_r <= data_b;
|
|
data_valid_b_r <= data_valid_b;
|
|
end
|
|
|
|
always @(*) begin
|
|
case(trigger_l_mix_a)
|
|
4'h0: trigger_a = 1'b1;
|
|
4'h1: trigger_a = trigger_pin_a;
|
|
4'h2: trigger_a = trigger_adc_a;
|
|
4'h4: trigger_a = trigger_pin_a | trigger_adc_a ;
|
|
4'h5: trigger_a = trigger_pin_a & trigger_adc_a ;
|
|
4'h6: trigger_a = trigger_pin_a ^ trigger_adc_a ;
|
|
4'h7: trigger_a = !(trigger_pin_a | trigger_adc_a) ;
|
|
4'h8: trigger_a = !(trigger_pin_a & trigger_adc_a) ;
|
|
4'h9: trigger_a = !(trigger_pin_a ^ trigger_adc_a) ;
|
|
default: trigger_a = 1'b1;
|
|
endcase
|
|
end
|
|
|
|
always @(*) begin
|
|
case(trigger_l_mix_b)
|
|
4'h0: trigger_b = 1'b1;
|
|
4'h1: trigger_b = trigger_pin_b;
|
|
4'h2: trigger_b = trigger_adc_b;
|
|
4'h4: trigger_b = trigger_pin_b | trigger_adc_b ;
|
|
4'h5: trigger_b = trigger_pin_b & trigger_adc_b ;
|
|
4'h6: trigger_b = trigger_pin_b ^ trigger_adc_b ;
|
|
4'h7: trigger_b = !(trigger_pin_b | trigger_adc_b) ;
|
|
4'h8: trigger_b = !(trigger_pin_b & trigger_adc_b) ;
|
|
4'h9: trigger_b = !(trigger_pin_b ^ trigger_adc_b) ;
|
|
default: trigger_b = 1'b1;
|
|
endcase
|
|
end
|
|
|
|
always @(*) begin
|
|
case(function_a)
|
|
2'h0: trigger_adc_a = comp_low_a;
|
|
2'h1: trigger_adc_a = comp_high_a;
|
|
2'h2: trigger_adc_a = passthrough_high_a;
|
|
2'h3: trigger_adc_a = passthrough_low_a;
|
|
default: trigger_adc_a = comp_low_a;
|
|
endcase
|
|
end
|
|
|
|
always @(*) begin
|
|
case(function_b)
|
|
2'h0: trigger_adc_b = comp_low_b;
|
|
2'h1: trigger_adc_b = comp_high_b;
|
|
2'h2: trigger_adc_b = passthrough_high_b;
|
|
2'h3: trigger_adc_b = passthrough_low_b;
|
|
default: trigger_adc_b = comp_low_b;
|
|
endcase
|
|
end
|
|
|
|
always @(posedge clk) begin
|
|
trigger_a_d1 <= trigger_i[0];
|
|
trigger_a_d2 <= trigger_a_d1;
|
|
trigger_a_d3 <= trigger_a_d2;
|
|
trigger_b_d1 <= trigger_i[1];
|
|
trigger_b_d2 <= trigger_b_d1;
|
|
trigger_b_d3 <= trigger_b_d2;
|
|
end
|
|
|
|
always @(*) begin
|
|
trigger_pin_a = ((!trigger_a_d3 & low_level[0]) |
|
|
(trigger_a_d3 & high_level[0]) |
|
|
(trigger_a_fall_edge & fall_edge[0]) |
|
|
(trigger_a_rise_edge & rise_edge[0]) |
|
|
(trigger_a_any_edge & any_edge[0]));
|
|
end
|
|
|
|
always @(*) begin
|
|
trigger_pin_b = ((!trigger_b_d3 & low_level[1]) |
|
|
(trigger_b_d3 & high_level[1]) |
|
|
(trigger_b_fall_edge & fall_edge[1]) |
|
|
(trigger_b_rise_edge & rise_edge[1]) |
|
|
(trigger_b_any_edge & any_edge[1]));
|
|
end
|
|
|
|
always @(*) begin
|
|
case(trigger_out_mix)
|
|
3'h0: trigger_out_mixed = trigger_a;
|
|
3'h1: trigger_out_mixed = trigger_b;
|
|
3'h2: trigger_out_mixed = trigger_a | trigger_b;
|
|
3'h3: trigger_out_mixed = trigger_a & trigger_b;
|
|
3'h4: trigger_out_mixed = trigger_a ^ trigger_b;
|
|
default: trigger_out_mixed = trigger_a;
|
|
endcase
|
|
end
|
|
|
|
always @(posedge clk) begin
|
|
if (data_valid_a == 1'b1) begin
|
|
if (data_a_cmp > limit_a_cmp) begin
|
|
comp_high_a <= 1'b1;
|
|
passthrough_high_a <= low_a;
|
|
end else begin
|
|
comp_high_a <= 1'b0;
|
|
passthrough_high_a <= 1'b0;
|
|
end
|
|
if (data_a_cmp < limit_a_cmp) begin
|
|
comp_low_a <= 1'b1;
|
|
passthrough_low_a <= high_a;
|
|
end else begin
|
|
comp_low_a <= 1'b0;
|
|
passthrough_low_a <= 1'b0;
|
|
end
|
|
if (passthrough_high_a == 1'b1) begin
|
|
low_a <= 1'b0;
|
|
end else if (data_a_cmp < limit_a_cmp - hysteresis_a) begin
|
|
low_a <= 1'b1;
|
|
end
|
|
if (passthrough_low_a == 1'b1) begin
|
|
high_a <= 1'b0;
|
|
end else if (data_a_cmp > limit_a_cmp + hysteresis_a) begin
|
|
high_a <= 1'b1;
|
|
end
|
|
end
|
|
end
|
|
|
|
always @(posedge clk) begin
|
|
if (data_valid_b == 1'b1) begin
|
|
if (data_b_cmp > limit_b_cmp) begin
|
|
comp_high_b <= 1'b1;
|
|
passthrough_high_b <= low_b;
|
|
end else begin
|
|
comp_high_b <= 1'b0;
|
|
passthrough_high_b <= 1'b0;
|
|
end
|
|
if (data_b_cmp < limit_b_cmp) begin
|
|
comp_low_b <= 1'b1;
|
|
passthrough_low_b <= high_b;
|
|
end else begin
|
|
comp_low_b <= 1'b0;
|
|
passthrough_low_b <= 1'b0;
|
|
end
|
|
if (trigger_b == 1'b1) begin
|
|
low_b <= 1'b0;
|
|
high_b <= 1'b0;
|
|
end else if (data_b_cmp < limit_b_cmp - hysteresis_b) begin
|
|
low_b <= 1'b1;
|
|
end else if (data_b_cmp > limit_b_cmp + hysteresis_b) begin
|
|
high_b <= 1'b1;
|
|
end
|
|
end
|
|
end
|
|
|
|
axi_adc_trigger_reg adc_trigger_registers (
|
|
|
|
.clk(clk),
|
|
|
|
.io_selection(io_selection),
|
|
.trigger_o(trigger_o),
|
|
.triggered(trigger_out_mixed),
|
|
|
|
.low_level(low_level),
|
|
.high_level(high_level),
|
|
.any_edge(any_edge),
|
|
.rise_edge(rise_edge),
|
|
.fall_edge(fall_edge),
|
|
|
|
.limit_a(limit_a),
|
|
.function_a(function_a),
|
|
.hysteresis_a(hysteresis_a),
|
|
.trigger_l_mix_a(trigger_l_mix_a),
|
|
|
|
.limit_b(limit_b),
|
|
.function_b(function_b),
|
|
.hysteresis_b(hysteresis_b),
|
|
.trigger_l_mix_b(trigger_l_mix_b),
|
|
|
|
.trigger_out_mix(trigger_out_mix),
|
|
.delay_trigger(delay_trigger),
|
|
|
|
// bus interface
|
|
|
|
.up_rstn(up_rstn),
|
|
.up_clk(up_clk),
|
|
.up_wreq(up_wreq),
|
|
.up_waddr(up_waddr),
|
|
.up_wdata(up_wdata),
|
|
.up_wack(up_wack),
|
|
.up_rreq(up_rreq),
|
|
.up_raddr(up_raddr),
|
|
.up_rdata(up_rdata),
|
|
.up_rack(up_rack));
|
|
|
|
up_axi i_up_axi (
|
|
.up_rstn (up_rstn),
|
|
.up_clk (up_clk),
|
|
.up_axi_awvalid (s_axi_awvalid),
|
|
.up_axi_awaddr (s_axi_awaddr),
|
|
.up_axi_awready (s_axi_awready),
|
|
.up_axi_wvalid (s_axi_wvalid),
|
|
.up_axi_wdata (s_axi_wdata),
|
|
.up_axi_wstrb (s_axi_wstrb),
|
|
.up_axi_wready (s_axi_wready),
|
|
.up_axi_bvalid (s_axi_bvalid),
|
|
.up_axi_bresp (s_axi_bresp),
|
|
.up_axi_bready (s_axi_bready),
|
|
.up_axi_arvalid (s_axi_arvalid),
|
|
.up_axi_araddr (s_axi_araddr),
|
|
.up_axi_arready (s_axi_arready),
|
|
.up_axi_rvalid (s_axi_rvalid),
|
|
.up_axi_rresp (s_axi_rresp),
|
|
.up_axi_rdata (s_axi_rdata),
|
|
.up_axi_rready (s_axi_rready),
|
|
.up_wreq (up_wreq),
|
|
.up_waddr (up_waddr),
|
|
.up_wdata (up_wdata),
|
|
.up_wack (up_wack),
|
|
.up_rreq (up_rreq),
|
|
.up_raddr (up_raddr),
|
|
.up_rdata (up_rdata),
|
|
.up_rack (up_rack));
|
|
|
|
endmodule
|
|
|
|
// ***************************************************************************
|
|
// ***************************************************************************
|